Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over current.
Incorrect use could result in abnormal heating, damage to related parts or cause burning.
READ CAUTIONS IN THE SELECTION GUIDE.
Read the cautions described in NEC/TOKIN's "Miniature Relays" when your choose relays for your application.
The information in this document is subject to change without notice.
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
2006.03.24 P0614EMDD03V0L02E
UC2/UD2 SERIES
DIMENSIONS AND PAD LAYOUTS
(Unit : mm [inch])
UC2 SERIES
mm [inch]
10.6 [0.417]
6.5 [0.256]
3.2
7.6
2.2
2.2
(mm)
8- 0.85
5.3 [0.209]
3.4 [0.134]
2.8 [0.110]
(1.5)
3.2
2.2
2.2
[0.126] [0.087] [0.087]
(1.5)
5.08
[0.2]
(Bottom view)
Note.
General tolerance :
±0.1
Tolerance of lead pitch is :
±0.15
mm [0.006inch]
Another tolerance is
±0.3
mm [0.012 inch]
( ) is reference value.
Value of trimmed lead type (NJ type)
UD2 SERIES
• STANDARD
mm [inch]
3.2
10.6 [0.417]
5.45 [0.215] max.
(mm)
2.2
2.2
6.5 [0.256]
0.2
(1.5)
3.2
2.2
2.2
[0.126] [0.087] [0.087]
(1.5)
5.08 [0.2]
8.4 [0.331]
0.8
2.66
Tolerance of lead pitch is :
±0.15
mm [0.006inch]
Another tolerance is
±0.3
mm [0.012 inch]
( ) is reference value.
(Bottom view)
Note.
General tolerance :
±0.1
• MINIMUM FOOTPRINT TYPE
mm [inch]
3.2
10.6 [0.417]
6.5 [0.256]
2.2
2.2
(mm)
6.0 [0.236] max.
0.2
(1.5)
3.2
2.2
2.2
[0.126] [0.087] [0.087]
(1.5)
5.08 [0.2]
6.8 [0.268]
1.86
0.8
Tolerance of lead pitch is :
±0.15
mm [0.006inch]
Another tolerance is
±0.3
mm [0.012 inch]
( ) is reference value.
(Bottom view)
Note.
General tolerance :
±0.1
2
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
2006.03.24 P0614EMDD03V0L02E
5.94
6.74
5.08
UC2/UD2 SERIES
PIN CONFIGURATIONS
(bottom view)
UC2 SERIES
1
2
3
4
1
2
3
4
+
+
R S
Index mark of
relay direction
8
7
6
5
+
8
7
6
5
Non-latch type
(not energized position)
Single coil latch type
(reset position)
S : Coil polarity of set (operate)
R : Coil polarity of reset (release)
UD2 SERIES
+
1
2
3
4
+
R S
1
2
3
4
Index mark of
relay direction
8
7
6
5
+
8
7
6
5
Non-latch type
(not energized position)
Single coil latch type
(reset position)
S : Coil polarity of set (operate)
R : Coil polarity of reset (release)
MARKINGS
(top view)
<2>
<1>
<3>
<1> Part number
JAPAN
UD2
<5>
0035
4. 5 N U
<2> Manufacturer
<3> Country of origin
<4> Date code
<5> Index mark of relay direction
(pin No. 1, 8)
<4>
SAFETY STANDARD AND RATING
UL Recoginzed
(UL508)*
File No.E73266
CSA Certified
(CSA C22.2 No. 14)
+
File No.LR46266
TUV Certified
(EN61810)
No. 2050596
Creepage and clearance of coil to contact is over
than 2 mm (According EN60950)
Basic insulation class
30 Vdc,1A (resistive)
110 Vdc, 0.3A (resistive)
125 Vac,0.5A (resistive)
*Spacing : UL840
+
Spacing : CSA std950
3
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
2006.03.24 P0614EMDD03V0L02E
UC2/UD2 SERIES
PERFORMANCE CHARACTERISTICS
(Community)
Contact Form
Maximum Switching Power
Contact Ratings
Maximum Switching Voltage
Maximum Switching Current
Maximum Carrying Current
Minimun Contact Ratings
Initial Contact Resistance
Contact Material
Nominal Operating Power
Non-Latch Type
Single Coil Latch Type
2 Form c
30W (resistive)
220 Vdc
1A
1A
10 mV.dc, 10
µ
A
100 m
4
37.5 VA (resistive)
250 Vac
Max. (Initial)
Silver alloy with gold alloy overlay
140 to 230 mW
100 to 120 mW
Approximately 2 ms
Approximately 1 ms without diode
1000 M
Between Open Contacts
Between Adjacent Contacts
Between Coil and Contacts
1500 Vac for one minute (2500 V surge, 2
×
10
µ
s
1
)
735 m / s
2
(misoperating)
980 m / s
2
(destructive failure)
10 to 55 Hz at double amplitude of 3 mm
(misoperating)
10 to 55 Hz, double amplitude of 5 mm
(Destructive failure)
–40 to +85°C
18 degrees at nominal coil voltage (140 mW)
No-load
5
×
10
7
7
3
Operate Time (Excluding Bounce)
Release Time (Excluding Bounce)
Insulation Resistance
Breakdown Voltage
at 500 Vdc
1000 Vac for one minute (1500 V surge, 10
×
160
µ
s
1
)
Shock Resistance
Vibration Resistance
Ambient Temperature
Coil Temperature Rise
operations (Non-latch type)
Running specifications
Load
Weight
1
2
1
×
10 operations (Latch type)
30 Vdc 1 A (resistive), 1
×
10
5
operations at 20°C
125 Vac 0.3 A (resistive), 1
×
10
5
operations at 20°C
Approximately 0.8 grams
rise time : 10
µ
s, decay time to half crest : 160
µ
s
rise time : 2
µ
s, decay time to half crest : 10
µ
s
3
This shows a number of operation where it can be running by which a fatal is not caused, and number of operation by which a
4
steady characteristic is maintained is 1
×
10
7
operations.
This value is a reference value in the resistive load.
Minimum capacity changes depending on switching frequency and enviroment temperature and the load.
RECOMMENDED RELAY DRIVE CONDITIONS
Drive under conditions. If it is impossible, please inquire to NEC/TOKIN.
Nonlatch type
Single coil latch type
Voltage : within
±5%
st nominal voltage
Square pulse (rise and fall time is rapidly)
Pulse height : within
±5%
at nomianl voltage
Pulse width : More than 10 ms
Ambient temperature
40
+85°C
4
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
Minimum footprint type with Silver-Nickel alloy contact
Latch type Nil: Nonlatch type
S: Single coil latch type
Nominal coil voltage
A numerical value of coil voltage (See the following lineup)
Series name
5
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
I am making a USART interface and PC communication program. Here is part of the code: flash uchar led_7[10] = {0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,0xb8,0xb9}; interrupt [USART_RXC] void usart_rx_i...
[i=s] This post was last edited by Erbai Ah Ah on 2016-8-28 09:13 [/i] I need some advice from an expert. The wireless network card is connected to the board via USB, but how do I drive the network ca...
Background: With the State Council issuing the "Guidelines for Epidemic Prevention and Control Measures for Resuming Work and Production in Enterprises and Institutions", it is proposed that all units...
System: AT89C52+MAX1270 Emulator: wave E6000/T+POD8X5XP Everything is normal during emulation, but after burning the program, no data can be collected. It is initially determined that the AD chip is n...
Due to an inadvertent misoperation during flashing, the PND was bricked. It is estimated that the underlying boot file is damaged. Now it cannot be started, black screen, and reset is invalid. The GPS...
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
1. Introduction
This design was made for participating in an electronic design competition. It effectively solved the problem of the operation and control of an electric car on a seesaw. The s...[Details]
With the advent of increasingly powerful processors, image sensors, memory, and other semiconductor devices, as well as the algorithms that enable them, computer vision can be implemented in a wide...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
1. Introduction
With the gradual automation and modernization of industrial control systems, fieldbus control systems have received more and more attention and application. CAN bus is currentl...[Details]
1 Introduction
The Third Steel Plant of Jigang Group is a key investment project of Jigang Group during the "15th Five-Year Plan". It has introduced first-class domestic and foreign advanced eq...[Details]
General LED lighting has a current limiting resistor in the driving circuit, and the power consumed by the resistor has nothing to do with the LED light emission. In order to improve efficiency, a...[Details]
The concept of state machine
State machine is an important concept in software programming. More important than this concept is its flexible application. In a clear and efficient program, ther...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
At very low temperatures, certain metals and alloys lose their resistance to electric
current
and become
superconductors
. Two parameters that are often measured are the transition ...[Details]
As people's requirements for safety and comfort in the process of driving cars continue to increase, automotive radars are widely used in the car's adaptive cruise system, collision avoidance syste...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
