3M
™
DIN C-Form Socket
.100” Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN
41612 Series
• Multi-pin count socket for VME, Multibus II, and VXI
backpanels
• Press-fit or solder tail terminals for PCB
• Expanded pin counts
• Optional retention clips
• Mates with C-form and R-form plugs
• See Regulatory Information Appendix (RIA) for chemical
compliance information
Date Modified: March 13, 2008
TS-1131-B
Sheet 1 of 4
Physical
Insulation:
Material: Glass Filled Polyester (PCT)
Flammability: UL94V-0
Color: Gray or Black
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [ 1.27 μm ] Min. Nickel
Wiping Area: (See Ordering Information)
Termination Area: (See Ordering Information)
Marking:
Part Number and Date Code
Electrical
Contact Resistance:
Current Rating:
Insulation Resistance:
Withstanding Voltage:
20 mΩ Max.
3.0 A @ 30°C T-rise above ambient
1 x 10
3
MΩ min. at 500 V
DC
1 x 10
3
V
AC
for 1 minute
Environmental
Temperature Rating:
-55°C to +125°C
Process Temperature Rating:
260°C (per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN C-Form Socket
.100” Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN
A
D
0.100
2.54
TYP.
B
0.230
5.84
0.039
.99
0.335
8.51
0.417
10.59
POSITION A1
41612 Series
PRESS-FIT OR SOLDER TAIL
0.457
11.61
0.252
6.40
C
0.024 X 0.015
[.61 X .38 ]
0.100
2.54
TYP.
E
C TAIL LENGTH
0.024
.61
0.100
2.54
TYP.
0.150
3.80
Inch
[mm]
Tolerance Unless Noted
.0
Inch
± .1
.00
.000
± .01 ± .005
0.160
4.06
Au FINISH
[ ] Dimensions for
Reference only
Feed/Thru Wire Strap W, PW1 and
PW2 with RR and GG30 Finish
(Au both ends)
Ordering Information
DIN-XXX CS X-XXX-XXXX
Contact Quantity
See Table 1
Plating and Insulating Color Options:
See Table 3
Contact Loading:
A = A Row only
B = Rows A & C Filled
C = Rows A, B, & C Filled
D = Rows A & B Filled
E = B Row only
Termination Options:
See table 2
TS-1131-B
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN C-Form Socket
.100” Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN
Table 1
Contact Quantity
016
032
048
32
016
032
064
096
064
032
040
080
120
080
040
050
100
150
100
050
41612 Series
D
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
4.900 [124.46]
4.900 [124.46]
4.900 [124.46]
4.900 [124.46]
4.900 [124.46]
Load Pattern
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
2.140 [54.36]
2.140 [54.36]
2.140 [54.36]
2.140 [54.36]
2.140 [54.36]
3.740 [95.00]
3.740 [95.00]
3.740 [95.00]
3.740 [95.00]
3.740 [95.00]
4.540 [115.32]
4.540 [115.32]
4.540 [115.32]
4.540 [115.32]
4.540 [115.32]
5.540 [140.72]
5.540 [140.72]
5.540 [140.72]
5.540 [140.72]
5.540 [140.72]
B
1.746 [44.35]
1.746 [44.35]
1.746 [44.35]
1.746 [44.35]
1.746 [44.35]
3.346 [84.99]
3.346 [84.99]
3.346 [84.99]
3.346 [84.99]
3.346 [84.99]
4.146 [105.31]
4.146 [105.31]
4.146 [105.31]
4.146 [105.31]
4.146 [105.31]
5.146 [130.71]
5.146 [130.71]
5.146 [130.71]
5.146 [130.71]
5.146 [130.71]
C
1.943 [49.35]
1.943 [49.35]
1.943 [49.35]
1.943 [49.35]
1.943 [49.35]
3.543 [89.99]
3.543 [89.99]
3.543 [89.99]
3.543 [89.99]
3.543 [89.99]
4.343 [110.31]
4.343 [110.31]
4.343 [110.31]
4.343 [110.31]
4.343 [110.31]
5.343 [135.71]
5.343 [135.71]
5.343 [135.71]
5.343 [135.71]
5.343 [135.71]
Table 2
SOLDER TERMINATION OPTION No
R1L
R3L
S1 contact thickness (solder tail) = 25mil
S1L contact thickness (solder tail) =14mil
S3L
W
DIM “C” in (mm)
0.157 (3.99)
0.090 (2.29)
0.157 (3.99)
0.157 (3.99)
0.090 (2.29)
0.512 (13.00)
0.189 (4.80)
0.512 (13.00)
0.669 (16.99)
0.236 (5.99)
Comments
with retention clips
with retention clips
no retention clips
no retention clips
no retention clips
wire wrap
PRESS-FIT TERMINATION OPTION No
PSL
PW1
PW2
PS
Table 3
Plating Suffix
Insulator Color
Press-Fit Termiantions
Solder Tail Terminations
Plating Composition
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.18 μm [7 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area (each end)
2.54 μm [100 μ”] Min. SnPb Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area (each end)
2.54 μm [100 μ”] Min. SnPb Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.25 μm [10 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [50 μ”] Min. Ni all over
TG30
TR
Gray
Gray
(RIA E2 & C2 apply)
(RIA E2 & C2 apply)
(RIA E3 & C2 apply)
(RIA E3 & C2 apply)
RR
GG30
MH
Gray
Gray
Black
(RIA E2 & C2 apply)
(RIA E2 & C2 apply)
(RIA E1 & C1 apply)
N/A
N/A
(RIA E1 & C1 apply)
HS
Black
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
KT
Black
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
TS-1131-B
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN C-Form Socket
.100” Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN
41612 Series
-C-
D
E
0.012
.30
0.100 TYP.
2.54
0.100
2.54
-B-
0.200
5.08
C
B
A
1
2
X
O
lO
0.110
2.79
O
F
lO
PLATED THROUGH- HOLE
0.004
M
A B C
0.100
2.54
-A-
0.006
M
A B C
RECOMMENDED MOUNTING HOLE PATTERN
HOLE PLATING TABLE For TG, TR, RR (Press-Fit Leads)
HOLE
“F”
HOLE PLATING TABLE For TG, TR, RR (Solder Tail Leads)
HOLE
“F”
HOLE PLATING TABLE For MH, HS and KT (Press-Fit Leads)
HOLE
“F”
DRILLED HOLE DIA. in (mm)
0.0425-0.044 (1.080-1.118) #57 OR
1.10mm TWIST DRILL
Cu THICKNESS in (mm)
0.0010 - 0.0020 (0.025
- 0.045)
Immersion Whisker Mitigating
Matte Sn Thickness μin (μm)
20 - 100 (0.508 - 2.54)
FINISHED DIA. in (mm)
0.037 - 0.043 (0.94 - 1.09)
DRILLED HOLE DIA. in (mm)
Cu THICKNESS in (mm)
SnPb THICKNESS μin (μm)
FINISHED DIA. in (mm)
0.041 - 0.049 (1.04 - 1.24)
DRILLED HOLE DIA. in (mm)
Cu THICKNESS in (mm)
SnPb THICKNESS μin (μm)
FINISHED DIA. in (mm)
0.037 - 0.043 (0.94 - 1.09)
HOLE PLATING TABLE For MH, HS, and KT (Solder Tail Leads)
HOLE
“F”
DRILLED HOLE DIA. in (mm)
Cu THICKNESS in (mm)
Immersion Matte Sn Thickness
μin (μm)
FINISHED DIA. in (mm)
0.041 - 0.049 (1.04 - 1.24)
TS-1131-B
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
京公网安备 11010802033920号
EEWORLD
