Make your own upgrade program , USB, serial port , any interface is OK
There are several advantages , such as convenient program upgrade , you can do your own encryption on the upgrade program , close...
After burning the program, I found that the program is not running, and the high and low levels of the GPIO port cannot be controlled. Some pins are only 2V. How to set BOOT0 and BOOT1? What is the re...
Hongmeng Development Board Neptune ( Part 2 ) —— Development Environment
After I received the Neptune development board, I immediately started setting up the development environment. I was in a hurry ...
1. Enable the device EMIFA module2. Configure the CEnCFG register3. Initialize the EMIFA module4. Open the EMIFA module5. Set the parameters configured in 2 to the opened EMIFA moduleComplete configur...
[i=s]This post was last edited by btty038 on 2020-6-9 23:33[/i]All devices connected to the mobile Internet require RF front-end chips. As the number of connected devices continues to increase, the RF...
Let's learn about algorithms together. Recommended books (Part 3) The mystery of programming language: Interpretation of algorithms (full color in four colors) [size=5][color=#0000ff]Why do we recomme...