Our teacher wants to simulate a 3-story elevator. Please help me find where I went wrong. //Elevator controller/*Signal definition: clk: clock signal d1, d2, d3, d4: floor request signal o1, o2, o3, o...
That is, each node is equipped with a computer, and each node sends data to all other nodes. However, I found that the nodes did not respond in broadcast mode, so how should I change it so that all no...
I am making an LED lighting device, using 36V AC as the power source, using a bridge circuit to rectify it into DC, and then using an LM3402 chip to drive the LED. The problem now is that the LM3402 c...
There is a USB demo program on the CD. I had nothing to do in the morning, so I downloaded it to the board and tried it out.
Compile and download, no problem. Very smoothly I found a B- port USB cable...
The microcontroller uses the timer mode to output PWM to drive the DC motor. How can the noise of the DC motor be reduced to the minimum? That is, the pulse width is adjusted to the best when PWM spee...
TD-SCDMA (Time Division Synchronous Code Division Multiple Access) is one of the three major standards for the third generation of mobile communications. It is a communication standard with indepen...[Details]
In today's society, heart disease has seriously affected people's life safety. Many patients with sudden heart attacks are threatened because they cannot get timely treatment. Traditional ECG monito...[Details]
1. Introduction
At present, with the continuous development of modern medical devices, especially electronic instruments directly connected to the human body, in addition to the increasingly high...[Details]
Digital signal processors have efficient numerical computing capabilities and can provide a good development environment, while programmable logic devices have highly flexible configurability. This...[Details]
Overview
Bioelectric signals are very weak, and there is strong interference when detecting them. Therefore, there are many technical difficulties in designing high-quality bioelectric ampli...[Details]
Currently, it is impossible to dynamically obtain patient information in medical monitoring. Once the patient's condition worsens, emergency treatment cannot be implemented in the first place, and the...[Details]
With the development of automatic control technology, the application of precision air pressure generation and control technology is becoming more and more extensive. However, the traditional valve...[Details]
As a single-host multi-slave bus system, the number of slave devices that can be connected to a 1-Wire bus is almost unlimited. In order to avoid logical conflicts, the 1-Wire bus interfaces of all...[Details]
DC regulated power supply is a commonly used electronic device, which can ensure stable output voltage when the grid voltage fluctuates or the load changes. A low ripple, high-precision regulated p...[Details]
Complex circuits and 3D EM simulation tools have reached a point where complex system-level behavior can be simulated before fabrication. Performing EM simulations simultaneously with circuit simul...[Details]
Combined with Samsung's ARM9 series embedded processor S3C2410, this paper explains how to perform modular programming of LCD driver and how to statically load the driver into the system kernel.
...[Details]
1 Introduction
The high temperature tester is mainly used for temperature tracking measurement and data acquisition during the heating process. By systematically analyzing the test data,...[Details]
The microwave multifunctional therapeutic device uses microwave radiation for heating treatment, which can achieve the effects of sterilization and blood circulation. Using microwaves to directly c...[Details]
1.
Introduction
With the rapid development of modern computer technology and Internet technology, embedded systems have begun to occupy the mainstream of the market. Due to the high ...[Details]
High-speed serial communication networks are transmitting data and video information at unprecedented speeds. As transmission speeds increase, the evaluation of networks and their components become...[Details]