EEWORLDEEWORLDEEWORLD

Part Number

Search

MAX6305UK00D-T

Description
5-Pin, Multiple-Input, Programmable Reset ICs
File Size118KB,11 Pages
ManufacturerMaxim
Websitehttps://www.maximintegrated.com/en.html
Download Datasheet Compare View All

MAX6305UK00D-T Overview

5-Pin, Multiple-Input, Programmable Reset ICs

19-1145; Rev 5; 4/08
5-Pin, Multiple-Input,
Programmable Reset ICs
General Description
The MAX6305–MAX6313 CMOS microprocessor (µP)
supervisory circuits are designed to monitor more than
one power supply. Ideal for monitoring both 5V and
3.3V in personal computer systems, these devices
assert a system reset if any of the monitored supplies
falls outside the programmed threshold. Low supply
current (15µA) and a small package suit them for
portable applications. The MAX6305–MAX6313 are
specifically designed to ignore fast transients on
any monitored supply.
These devices are available in a SOT23-5 package,
have factory-programmed reset thresholds from 2.5V to
5.0V (in 100mV increments), and feature four power-on
reset timeout periods. Ten standard versions are avail-
able. Contact the factory for availability of non standard
versions.
Features
o
Small 5-Pin SOT23 Package
o
Precision Factory-Set V
CC
Reset Thresholds;
Available in 0.1V Increments from 2.5V to 5V
o
Immune to Short V
CC
Transients
o
Guaranteed
RESET
Valid to V
CC
= 1V
o
Guaranteed Over Temperature
o
8µA Supply Current
o
Factory-Set Reset Timeout Delay from
1ms (min) to 1120ms (min)
o
No External Components
o
Manual Reset Input
o
Under/Overvoltage Supply Monitoring
MAX6305–MAX6313
Ordering Information
PART
MAX6305UK00D_-T
MAX6305EUK00D_-T
TEMP RANGE
-0°C to +70°C
-40°C to +85°C
PIN-
PACKAGE
5 SOT23
5 SOT23
Applications
Portable Computers
Computers
Controllers
Intelligent Instruments
Portable/Battery-Powered Equipment
Multivoltage Systems: 3V/5V, 5V/12V, 5V/24V
Embedded Control Systems
Pin Configurations and Typical Operating Circuit appear at
end of data sheet.
Ordering Information continued at end of data sheet.
Standard Versions Table appears at end of data sheet.
The MAX6306/MAX6307/MAX6309/MAX6310/MAX6312/
MAX6313 are available with factory-set V
CC
reset thresholds from
2.5V to 5V, in 0.1V increments. Insert the desired nominal reset
threshold (from Table 1) into the blanks following the letters UK.
All parts also offer factory-programmed reset timeout periods.
Insert the number corresponding to the desired nominal timeout
period index following the “D” in the part number (D1 = 1ms min,
D2 = 20ms min, D3 = 140ms min, and D4 = 1120ms min). There
are 10 standard versions with a required order increment of 2,500
pieces. Sample stock is generally held on the standard versions
only (see Standard Versions table). Required order increment is
10,000 pieces for non-standard versions. Contact factory for
availability of non-standard versions. All devices available in tape-
and-reel only.
Devices are available in both leaded and lead-free packaging.
Specify lead-free by replacing “-T” with “+T” when ordering.
_______________________________________________________________Selector Table
PART
MAX6305
MAX6306
MAX6307
MAX6308
MAX6309
MAX6310
MAX6311
MAX6312
MAX6313
OPEN-DRAIN
RESET
OUTPUT



PUSH/PULL
RESET
OUTPUT



PUSH/PULL
RESET
OUTPUT



FACTORY-
ADDITIONAL
NEGATIVE/
MANUAL-
SET RESET
UNDERVOLTAGE OVERVOLTAGE
RESET
THRESHOLD
RESET INPUTS
RESET INPUT
INPUT
ON V
CC






2
1
1
2
1
1
2
1
1






1
________________________________________________________________
Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.

MAX6305UK00D-T Related Products

MAX6305UK00D-T MAX6305EUK00D-T MAX6305_08
Description 5-Pin, Multiple-Input, Programmable Reset ICs 5-Pin, Multiple-Input, Programmable Reset ICs 5-Pin, Multiple-Input, Programmable Reset ICs
GD32L233C-START Review——05.SPI Test——Driving TFT Screen
[i=s]This post was last edited by wadeRen on 2022-2-17 22:32[/i] # GD32L233C-START Review——05.SPI Test—Driving TFT Screen# [Article Navigation] [GD32L233C-START Review——01.Unboxing, Development Kit](h...
wadeRen GD32 MCU
【TI original】LM3S Ethernet remote upgrade with encryption solution
Step 1: Release the programStep 2: Download the updateThe third step is the encryption algorithm inside the program. I add a random number to the MAC address of the device and encrypt it with the MD5 ...
fengzhang2002 Microcontroller MCU
The first test code for LPC1343 under LPCXpresso v3.2
There is an LED on the board, and the LED flashing is achieved by modifying the GPIO routine under LPCXpresso v3.2. Briefly introduce the usage and upload the code....
莫恩 NXP MCU
Keithley SourceMeter - One Test Instrument Compares to Five
From 1989 when Keithley invented the digital source meter to the present day, Keithley source meters have a market share of 80% , making them a major brand in the source meter market. Over the past tw...
agitek2017 Test/Measurement
Problems with installing eclipse under linux
I installed JDK, as shown in the picture:I also installed SDK, as shown in the picture:But after installing eclipse, an error occurred: As shown in the picture:Can any experts tell me how to solve thi...
chenbingjy Linux and Android

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1292  2115  564  2231  1440  26  43  12  45  29 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号