EEWORLDEEWORLDEEWORLD

Part Number

Search

SST25WF512-40-5I-QAF

Description
256K X 8 FLASH 1.8V PROM, PDSO8
Categorystorage   
File Size857KB,32 Pages
ManufacturerSST
Websitehttp://www.ssti.com
Download Datasheet Parametric View All

SST25WF512-40-5I-QAF Overview

256K X 8 FLASH 1.8V PROM, PDSO8

SST25WF512-40-5I-QAF Parametric

Parameter NameAttribute value
Number of functions1
Number of terminals8
Maximum operating temperature85 Cel
Minimum operating temperature-40 Cel
Maximum supply/operating voltage1.95 V
Minimum supply/operating voltage1.65 V
Rated supply voltage1.8 V
maximum clock frequency40 MHz
Processing package description0.150 INCH, ROHS COMPLIANT, MS-012AA, SOIC-8
Lead-freeYes
EU RoHS regulationsYes
stateTRANSFERRED
CraftsmanshipCMOS
packaging shapeRECTANGULAR
Package SizeSMALL OUTLINE
surface mountYes
Terminal formGULL WING
Terminal spacing1.27 mm
terminal coatingNICKEL PALLADIUM GOLD
Terminal locationDUAL
Packaging MaterialsPLASTIC/EPOXY
Temperature levelINDUSTRIAL
memory width8
organize256K X 8
storage density2.10E6 deg
operating modeSYNCHRONOUS
Number of digits262144 words
Number of digits256K
Memory IC typeFLASH 1.8V PROM
serial parallelSERIAL
512 Kbit / 1 Mbit / 2 Mbit / 4Mbit 1.8V SPI Serial Flash
SST25WF512 / SST25WF010 / SST25WF020 / SST25WF040
SST25VF016B16Mb Serial Peripheral Interface (SPI) flash memory
Data Sheet
FEATURES:
• Single Voltage Read and Write Operations
– 1.65-1.95V
• Serial Interface Architecture
– SPI Compatible: Mode 0 and Mode 3
• High Speed Clock Frequency
– 40MHz
• Superior Reliability
– Endurance: 100,000 Cycles
– Greater than 100 years Data Retention
• Ultra-Low Power Consumption:
– Active Read Current: 2 mA (typical @ 20MHz)
– Standby Current: 2 µA (typical)
• Flexible Erase Capability
– Uniform 4 KByte sectors
– Uniform 32 KByte overlay blocks
– Uniform 64 KByte overlay blocks
(2 Mbit and 4 Mbit only)
• Fast Erase and Byte-Program:
– Chip-Erase Time: 125 ms (typical)
– Sector-/Block-Erase Time: 62ms (typical)
– Byte-Program Time: 50 µS (typical)
• Auto Address Increment (AAI) Programming
– Decrease total chip programming time over
Byte-Program operations
• End-of-Write Detection
– Software polling the BUSY bit in Status Register
– Busy Status readout on SO pin
• Reset Pin (RST#) or Programmable Hold Pin
(HOLD#) option
– Hardware Reset pin as default
– Hold pin option to suspend a serial sequence
without deselecting the device
• Write Protection (WP#)
– Enables/Disables the Lock-Down function of the
status register
• Software Write Protection
– Write protection through Block-Protection bits in
status register
• Temperature Range
– Industrial: -40°C to +85°C
• Packages Available
– 8-lead SOIC (150 mils)
– 8-contact WSON (5mm x 6mm)
• All non-Pb (lead-free) devices are RoHS compliant
PRODUCT DESCRIPTION
The SST25WF512, SST25WF010, SST25WF020, and
SST25WF040 are members of the Serial Flash 25 Series
family and feature a four-wire, SPI-compatible interface that
allows for a low pin-count package which occupies less
board space and ultimately lowers total system costs.
SST25WF512/010/020/040 SPI serial flash memories are
manufactured with SST proprietary, high-performance
CMOS SuperFlash technology. The split-gate cell design
and thick-oxide tunneling injector attain better reliability and
manufacturability compared with alternate approaches.
The SST25WF512/010/020/040 devices significantly
improve performance and reliability, while lowering power
consumption. The devices write (Program or Erase) with a
single power supply of 1.65-1.95V for SST25WF512/010/
020/040. The total energy consumed is a function of the
applied voltage, current, and time of application. Since for
any given voltage range, the SuperFlash technology uses
less current to program and has a shorter erase time, the
total energy consumed during any Erase or Program oper-
ation is less than alternative flash memory technologies.
The SST25WF512/010/020/040 devices are offered in
both 8-lead SOIC and an 8-contact WSON packages. See
Figure 2 for the pin assignment.
©2009 Silicon Storage Technology, Inc.
S71328-08-000
11/09
1
The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc.
These specifications are subject to change without notice.
I went to the Industrial Expo yesterday and took some photos...
There were a lot of booths for robots, lasers, and 3D printing. I’ll post something a little different from the theme....
azhiking Robotics Development
Wireless Communication Principles
Basic knowledge of wireless communication principles~~~ Any good suggestions?...
lance0220 Embedded System
The ADC12 module of 430F149 cannot sample correctly. Please help me find the problem! !
void main(void) { volatile unsigned int i; WDTCTL = WDTPW + WDTHOLD; i = 0; P6SEL |= 0x08; // Enable ADC channel A3 ADC12CTL0 = ADC12ON+SHT0_15+MSC; // Turn on ADC and set sampling time ADC12CTL1 = SH...
qubeini Microcontroller MCU
After using MAX735 to convert +5V to -5V, the dual-power op amp is powered and -5V is pulled down to 0V
As shown in the figure, I converted +5V to -5V through MAX735, and then supplied the positive and negative 5V to the dual power amplifier. Once powered on, -5V was pulled down to 0V. After disconnecti...
saa1653 Power technology
I'm looking for a solution to the DP86 sensor compensation schematic diagram, but I don't quite understand it.
[img=427,274]https://bbs.eeworld.com.cn/forum.php?mod=image&aid=337900&size=300x300&key=1143fabe5f59cfc0&nocache=yes&type=fixnone[/img]...
qw1525296252 Integrated technical exchanges

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1406  2762  2544  1036  2593  29  56  52  21  53 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号