ECOsine® high power passive harmonic filter modules
Compact cabinet filter for quick installation and
easy commissioning
Cost-effective enclosed passive harmonic filter
Optimized for motor drives with DC-link
chokes
Helps to comply with international power
quality standards
Supports an efficient utilization of electrical
system capacity
Filters for thyristor (SCR) rectifiers
Approvals
Typical application
Schaffner ECOsine filter cabinets can be applied to
virtually any kind of power electronics with front-end
six thyristor rectifiers, where harmonic current
distortion needs to be reduced to defined limits. The
compact filter cabinets can be easily commissioned
and quickly installed into extisting designs without
requiring an in-depth system analysis or highly
trained specialists.
Typical applications include higher power AC and DC
motor drives with either six thyristor used e.g. in
HVAC, water/wastewater, oil & gas, or mission critical
factory automation equipment. In addition, ECOsine
filters can help to reduce thermal and electrical
overload caused by harmonic currents in installations
involving UPS, high power rectifiers and other non-
linear three-phase power supplies.
Technical specifications
Nominal operating voltage
Operating frequency
Total harmonic current distortion THID*
Total demand distortion TDD
Voltage tolerance range
Nominal motor drive input power rating
Efficiency
High potential test voltage
Protection category
Cooling
Overload capability
Ambient temperature range
3x 380 to 500 VAC
50 Hz +/-1 Hz
~5% @ rated power with Ldc
<15% @ de-rated power without Ldc
According to IEEE-519
3x 342 to 550 VAC
200 to 400 kW
≥99% @ nominal line voltage and power
P –> E 2500VAC (2 sec)
IP 23 for -E2 type filters
IP 54 for -E5 type filters
Forced air
1.6x rated current for 1 minute, once per hour
-25°C to +40°C fully operational
-25°C to +85°C transport and storage
+40°C to +60°C de-rated operation**
Flammability according to
Design corresponding to
SCCR***
Earthing System
UL 94V-2 or better
UL 508c, EN 61558-2-20, CE (LVD 2006/95/EC)
100 kA
TN, TT, IT
*** System requirements: THVD <2%, line voltage unbalance <1%
** *Note:
SCR rectifier front-end will produce different results, depending upon the firing angle of the thyristors
*** Iderated = Inominal * √(85°C-Tamb)/45°C
*** External UL-rated fuses required
2
PQ/Harmonics
Schaffner Group
Datasheets
2016
Performance characteristics
THID – Total harmonic current
distortion
ECOsine high power passive harmonic filter
performance is optimized for rectifiers/motor drives
with a dc-link choke. In such applications, a THID of
roughly 5% can be expected. The use of a dc-link
choke is highly recommended. In a system without
L
dc
, the filter module has to be derated to max. 70% of
its nominal power rating. In such applications, a THID
of 10…15% can be expected.
Displacement power factor
At full load, ECOsine filters yield unity power factor.
At lower load levels, the capacitive current into the
power capacitors of the trap circuit cause a leading
displacement power factor. This is the case with all
types of passive filters with large capacitors. However,
compared to traditional filters the useful range of
Schaffner ECOsine is much extended (cos phi >0.9
from 35 to 100% of rated load).
ECOsine filters allow for trap disconnect at light load
to avoid low DPF situations if required. This feature
can be provided by the installer using a capacitor
contactor of suitable size for the trap circuit.
DC-link voltage
ECOsine harmonic filters have a very low impact on
the dc-link voltage of the motor drive. The voltage
variation as function of the load is represented in the
performance diagram beside. Tolerances are kept
narrow in order to ensure that motor drives do not
suffer from noise tripping because of under- or over-
voltage conditions.
3
PQ/Harmonics
Schaffner Group
Datasheets
2016
Filter selection table (-E2)
Filter
Rated load power*
@ 400 VAC/50 Hz
[kW]
FN 3411-380-99-E2
FN 3411-470-99-E2
FN 3411-580-99-E2
FN 3411-650-99-E2
FN 3411-710-99-E2
200
250
315
355
400
Rated load power*
@ 500 VAC/50 Hz
[kW]
250
315
355
400
450
Typ. power loss
@ rated load
[W]
1040
1370
1540
1550
1680
Weight
choke module
[kg]
120
135
160
215
250
[kg]
240
264
291
371
408
Weight total
* Power rating for motor drives with dc-link chokes. If no Ldc is available, load power of the filter has to be de-rated to 70% of the specified value above
In this case, the THID will be between 10-15%
Filter selection table (-E5)
Filter
Rated load power*
@ 400 VAC/50 Hz
[kW]
FN 3411-380-99-E5
FN 3411-470-99-E5
FN 3411-580-99-E5
FN 3411-650-99-E5
FN 3411-710-99-E5
200
250
315
355
400
Rated load power*
@ 500 VAC/50 Hz
[kW]
250
315
355
400
450
Typ. power loss
@ rated load
[W]
1040
1370
1540
1550
1680
Weight
choke module
[kg]
120
135
160
215
250
[kg]
243
267
294
374
411
Weight total
* Power rating for motor drives with dc-link chokes. If no Ldc is available, load power of the filter has to be de-rated to 70% of the specified value above
In this case, the THID will be between 10-15%
Application
ECOsine filters are best installed directly at the input of 6 thyristor (SCR). It is possible to connect several non-linear loads (e.g. motor drives) in parallel. In this case the
rating of the filter must match the sum of the power ratings of loads connected to it.
[i=s]This post was last edited by cxmdz on 2019-7-30 10:28[/i]LPC1768 has four serial ports available. This chapter uses serial port 0 and serial port 2 as experiments, where serial port 0 is configur...
[align=left][size=4][color=#000000][backcolor=white]Galvanic isolation is a key requirement in many industrial applications. Isolation provides technical advantages such as breaking noisy ground loops...
To be more specific, it means that I don't understand the user manual. Maybe my basic knowledge is not good enough. How to call the API function? It's too abstract....
Today's computer peripherals are pursuing high speed and high versatility. In order to meet user needs, seven companies led by Intel launched the USB (Universal Serial Bus) bus protocol in 1994, wh...[Details]
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
Google's driverless technology is not only an eye-catching technology, but also a subversion of the car usage model.
Those who have watched anti-terrorism films and TV dramas must have been im...[Details]
introduction
In the discharge process of tokamak plasma physics, the study of rupture and sawtooth is of great significance. Rupture and sawtooth exist in most tokamaks. Rupture is a notew...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
The solidification and modularization of intelligent video analysis algorithms are the current trends in the application of intelligent video analysis technology. It perfectly combines intelligent ...[Details]
Overview
As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN-bus has been widely used in various automa...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
hint:
The number of speakers and their spacing limit the sound field of a portable stereo system.
Spatial audio attempts to artificially recreate the experience of listening to sounds i...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
NXP MCU
京公网安备 11010802033920号
EEWORLD
