CMF Series
Powertron
•
•
•
•
•
•
•
Resistances from 5.1Ohm to 10MOhms
Power Rating 0.065 to 0.25 Watts
Resistance Tolerances to ± 0.05%
TCR’s to ± 5 ppm/K
Extreme Low Noise
Precision / Thin Film Resistance Element
Sizes: 0603 / 0805 / 1206 / 1210 / 2512
SPECIFICATIONS
Type
Power Rating ( W )
1
Working Voltage
( VAC )
Resistance Range
(
W
)
0603
0.065
75
0805
0.125
100
Tolerances Available ( % )
Temperature Coefficients Available ( ± ppm/K )
2
1%
50
0.1% to 1%
25 / 50
0.1% to 1%
10 / 15 / 25 / 50
0.05% to 1%
5 / 10 / 15 / 25 / 50
0.05% to 1%
10 / 15 / 25 / 50
0.25% to 1%
50
-
1
2
1206
0.25
200
5.1W - <10W
-
0.1% to 1%
25 / 50
0.1% to 1%
10 / 15 / 25 / 50
0.1% to 1%
5 / 10 / 15 / 25 / 50
-
-
-
0.1% to 1%
25 / 50
0.1% to 1%
10 / 15 / 25 / 50
0.05% to 1%
5 / 10 / 15 / 25 / 50
0.1% to 1%
10 / 15 / 25 / 50
-
10W - <47W
47W - <100W
100W - 332k
>332k - 1M
>1M - 2M
>2M - 10M
-
-
W @ 70 °C / 0W @ 125 °C
5 / 10 / 15 PPM : +25 °C to +85 °C
3
1000V Available / contact factory
Document Number: 64304
Revision: 20-09-10
For technical questions, contact:
powertron@vishaypg.com
www.powertron.de
1
CMF Series
Powertron
SPECIFICATIONS
(continued)
Specification
Temperature Range
Climactic Cetegory
Solderability
Max. Soldering Temperature
Value
-55°C to +125°C
55 / 125 / 56
250°C / 3s
260°C / 10s
Long Term Stability
Storage 125°C / 1000h
Load Life / P=70% / 70°C / 1000h
Humidity / 96%RH / 40°C / 56 days
Max
DR
< 47W
±0.25%
±0.25%
±0.5%
47W
- 10 MW
±0.15%
±0.1%
±0.15%
Type
CMF 0603
CMF 0805
CMF 1206
Dimensions
L
0.063
±0.004
[ 1.6
±0.1
]
0.080
±0.004
[ 2.0
±0.1
]
0.126
±0.008
[ 3.2
±0.2
]
B
0.030
±0.004
[ 0.8
±0.1
]
0.050
±0.004
[ 1.25
±0.1
]
0.063
±0.006
[ 1.6
±0.15
]
D
0.018
±0.004
[ 0.45
±0.1
]
0.022
±0.004
[ 0.55
±0.1
]
0.022
±0.004
[ 0.55
±0.1
]
C
0.012
±0.008
[ 0.3
±0.2
]
0.016
±0.008
[ 0.4
±0.2
]
0.020
±0.008
[ 0.5
±0.2
]
Packaging:
Bulk or Blistertape to IEC 60286-3
Power ( % )
Tape width 8mm / Reel Diameter 180 or 330mm
Minimum quantity Bulk / 100 pieces per value
Minimum quantity Tape & Reel / 1000 pieces per value
Power Derating Curve
120
100
80
60
40
20
0
Ordering Information
0
25
50
75
100
125
150
175
Part Number - Resistance - Tolerance - TCR - Packaging
Example: CMF 0603 10 kOhms 0.1% 10ppm Tape
( Note: if no TCR is Specified / The highest value will be supplied )
Ambient Temperature (°C)
www.powertron.de
2
For technical questions, contact:
powertron@vishaypg.com
Document Number: 64304
Revision: 20-09-10
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase.
To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Power technology
京公网安备 11010802033920号
EEWORLD
