PIC16LF722-I/ML datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> PIC16LF722-I/ML

PIC16LF722-I/ML: Description8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO28; CategoryThe embedded processor and controller Microcontrollers and processors; File Size3MB，282 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Download user manual Parametric View All

PIC16LF722-I/ML Overview

8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO28

PIC16LF722-I/ML Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	QFN
package instruction	6 X 6 MM, ROHS COMPLIANT, PLASTIC, QFN-28
Contacts	28
Reach Compliance Code	compli
ECCN code	EAR99
Factory Lead Time	18 weeks
Samacsys Descripti	MCU 3.5K Flash 128B RAM 25 I/O QFN28
Has ADC	YES
Address bus width
bit size	8
CPU series	PIC
maximum clock frequency	20 MHz
DAC channel	NO
DMA channel	NO
External data bus width
JESD-30 code	S-PQCC-N28
JESD-609 code	e3
length	6 mm
Humidity sensitivity level	1
Number of I/O lines	25
Number of terminals	28
On-chip program ROM width	14
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	HVQCCN
Encapsulate equivalent code	LCC28,.24SQ,25
Package shape	SQUARE
Package form	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Celsius)	260
power supply	2/3.3 V
Certification status	Not Qualified
RAM (bytes)	128
rom(word)	2048
ROM programmability	FLASH
Maximum seat height	1 mm
speed	20 MHz
Maximum slew rate	2.8 mA
Maximum supply voltage	3.6 V
Minimum supply voltage	2.3 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn) - annealed
Terminal form	NO LEAD
Terminal pitch	0.65 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	40
width	6 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

User Manual

Preview

Download Datasheet

View All

PIC16(L)F722/3/4/6/7

28/40/44-Pin Flash Microcontrollers with XLP Technology

Devices Included In This Data Sheet:

PIC16F722/3/4/6/7 Devices:

• PIC16F722

• PIC16F723

• PIC16F724

PIC16LF722/3/4/6/7 Devices:

• PIC16LF722

• PIC16LF723

• PIC16LF724

• PIC16LF726

• PIC16LF727

• PIC16F726

• PIC16F727

Extreme Low-Power Management

PIC16LF722/3/4/6/7 with XLP:

• Sleep Mode: 20 nA

• Watchdog Timer: 500 nA

• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:

• A/D Converter:

- 8-bit resolution and up to 14 channels

- Conversion available during Sleep

- Selectable 1.024/2.048/4.096V voltage

reference

• On-chip 3.2V Regulator (PIC16F722/3/4/6/7

devices only)

High-Performance RISC CPU:

• Only 35 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 20 MHz oscillator/clock input

- DC – 200 ns instruction cycle

• Up to 8K x 14 Words of Flash Program Memory

• Up to 368 Bytes of Data Memory (RAM)

• Interrupt Capability

• 8-Level Deep Hardware Stack

• Direct, Indirect and Relative Addressing modes

• Processor Read Access to Program Memory

• Pinout Compatible to other 28/40-pin PIC16CXXX

and PIC16FXXX Microcontrollers

Peripheral Highlights:

• Up to 35 I/O Pins and One Input-only Pin:

- High-current source/sink for direct LED drive

- Interrupt-on-pin change

- Individually programmable weak pull-ups

• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

• Enhanced Timer1:

- Dedicated low-power 32 kHz oscillator

- 16-bit timer/counter with prescaler

- External Gate Input mode with Toggle and

Single Shot modes

- Interrupt-on-gate completion

• Timer2: 8-Bit Timer/Counter with 8-Bit Period

• Two Capture, Compare, PWM (CCP) Modules:

- 16-bit Capture, max. resolution 12.5 ns

- 16-bit Compare, max. resolution 200 ns

- 10-bit PWM, max. frequency 20 kHz

• Addressable Universal Synchronous

Asynchronous Receiver Transmitter (AUSART)

• Synchronous Serial Port (SSP):

- SPI (Master/Slave)

- I

C (Slave) with Address Mask

• mTouch

Sensing Oscillator Module:

- Up to 16 input channels

Special Microcontroller Features:

• Precision Internal Oscillator:

- 16 MHz or 500 kHz operation

- Factory calibrated to ±1%, typical

- Software tunable

- Software selectable ÷1, ÷2, ÷4 or ÷8 divider

• 1.8V-5.5V Operation – PIC16F722/3/4/6/7

• 1.8V-3.6V Operation – PIC16LF722/3/4/6/7

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Brown-out Reset (BOR):

- Selectable between two trip points

- Disable in Sleep option

• Programmable Code Protection

• In-Circuit Serial Programming

(ICSP

) via Two

Pins

• Multiplexed Master Clear with Pull-up/Input Pin

• Industrial and Extended Temperature Range

• High-Endurance Flash Cell:

- 1,000 write Flash endurance (typical)

- Flash retention: > 40 years

• Power-Saving Sleep mode



2007-2015 Microchip Technology Inc.

DS40001341F-page 1

Recommended Resources

KBC-Ⅱ type programmable power circuit

A more complete anti-stop vibration circuit

KTYL81-210 temperature sensor is used in A/D converter temperature compensation circuit

Square root circuit diagram composed of 4302

High power tube single-ended class A 211 amplifier

810E computer motherboard circuit diagram_14

Has anyone tried running MPY in C?: I saw someone run C with subprocess under MPY, and I want to ask if anyone has tried it. I was given a post by a foreigner, but I don’t understand it at my level. [url]https://github.com/PyConPL/Book/...; 凉冰 MicroPython Open Source section

There is no signal at all when using the ceramic antenna on the cc2541. Can anyone help me see if that is wrong?: I tried to draw the board myself. The ceramic antenna I used was RFANT3216120A5T, and I drew it according to the data sheet. First, the balun outputted a 50Ω impedance, and then the antenna. But the r...; osiris00 RF/Wirelessly

Summary of electronic circuit knowledge points: [color=#000000]1. Pure single crystal semiconductor is also called intrinsic semiconductor, and the number of carriers, free electrons and holes inside it is equal. 2. Emitter follower belongs to comm...; tiankai001 MCU

I drew the Infineon xc878 xc886 package: The packaging of two chips I drew when I was making a CAN-BUS experimental board some time ago...; LRXTL PCB Design

uClinux system transplantation and implementation of web-server based on FPGA[1]: uClinux system transplantation based on FPGA and implementation of web-server[1] I have been working on the operating system on niosII recently, and finally implemented a web-server. I would like to s...; ahwangbang Linux and Android

Regarding stm32, this is OK.: Measure six-phase voltages, set the timer2 to 10ms as the reference for the delay. In addition, the output comparison is 500us. In the output comparison interrupt, the software triggers the ADC to sca...; luoyaxu stm32/stm8

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components