PIC16LF726-E/SP datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> PIC16LF726-E/SP

PIC16LF726-E/SP: Description8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO28; CategoryThe embedded processor and controller Microcontrollers and processors; File Size3MB，282 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Download user manual Parametric View All

PIC16LF726-E/SP Overview

8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO28

PIC16LF726-E/SP Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	DIP
package instruction	0.300 INCH, ROHS COMPLIANT, PLASTIC, SDIP-28
Contacts	28
Reach Compliance Code	compli
ECCN code	EAR99
Factory Lead Time	6 weeks
Has ADC	YES
Address bus width
bit size	8
CPU series	PIC
maximum clock frequency	20 MHz
DAC channel	NO
DMA channel	NO
External data bus width
JESD-30 code	R-PDIP-T28
JESD-609 code	e3
length	34.671 mm
Number of I/O lines	25
Number of terminals	28
On-chip program ROM width	14
Maximum operating temperature	125 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	DIP
Encapsulate equivalent code	DIP28,.3
Package shape	RECTANGULAR
Package form	IN-LINE
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
power supply	2/3.3 V
Certification status	Not Qualified
RAM (bytes)	368
rom(word)	8192
ROM programmability	FLASH
Maximum seat height	5.08 mm
speed	20 MHz
Maximum slew rate	2.8 mA
Maximum supply voltage	3.6 V
Minimum supply voltage	2.3 V
Nominal supply voltage	3.3 V
surface mount	NO
technology	CMOS
Temperature level	AUTOMOTIVE
Terminal surface	Matte Tin (Sn)
Terminal form	THROUGH-HOLE
Terminal pitch	2.54 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	NOT SPECIFIED
width	7.62 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

User Manual

Preview

Download Datasheet

View All

PIC16(L)F722/3/4/6/7

28/40/44-Pin Flash Microcontrollers with XLP Technology

Devices Included In This Data Sheet:

PIC16F722/3/4/6/7 Devices:

• PIC16F722

• PIC16F723

• PIC16F724

PIC16LF722/3/4/6/7 Devices:

• PIC16LF722

• PIC16LF723

• PIC16LF724

• PIC16LF726

• PIC16LF727

• PIC16F726

• PIC16F727

Extreme Low-Power Management

PIC16LF722/3/4/6/7 with XLP:

• Sleep Mode: 20 nA

• Watchdog Timer: 500 nA

• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:

• A/D Converter:

- 8-bit resolution and up to 14 channels

- Conversion available during Sleep

- Selectable 1.024/2.048/4.096V voltage

reference

• On-chip 3.2V Regulator (PIC16F722/3/4/6/7

devices only)

High-Performance RISC CPU:

• Only 35 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 20 MHz oscillator/clock input

- DC – 200 ns instruction cycle

• Up to 8K x 14 Words of Flash Program Memory

• Up to 368 Bytes of Data Memory (RAM)

• Interrupt Capability

• 8-Level Deep Hardware Stack

• Direct, Indirect and Relative Addressing modes

• Processor Read Access to Program Memory

• Pinout Compatible to other 28/40-pin PIC16CXXX

and PIC16FXXX Microcontrollers

Peripheral Highlights:

• Up to 35 I/O Pins and One Input-only Pin:

- High-current source/sink for direct LED drive

- Interrupt-on-pin change

- Individually programmable weak pull-ups

• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

• Enhanced Timer1:

- Dedicated low-power 32 kHz oscillator

- 16-bit timer/counter with prescaler

- External Gate Input mode with Toggle and

Single Shot modes

- Interrupt-on-gate completion

• Timer2: 8-Bit Timer/Counter with 8-Bit Period

• Two Capture, Compare, PWM (CCP) Modules:

- 16-bit Capture, max. resolution 12.5 ns

- 16-bit Compare, max. resolution 200 ns

- 10-bit PWM, max. frequency 20 kHz

• Addressable Universal Synchronous

Asynchronous Receiver Transmitter (AUSART)

• Synchronous Serial Port (SSP):

- SPI (Master/Slave)

- I

C (Slave) with Address Mask

• mTouch

Sensing Oscillator Module:

- Up to 16 input channels

Special Microcontroller Features:

• Precision Internal Oscillator:

- 16 MHz or 500 kHz operation

- Factory calibrated to ±1%, typical

- Software tunable

- Software selectable ÷1, ÷2, ÷4 or ÷8 divider

• 1.8V-5.5V Operation – PIC16F722/3/4/6/7

• 1.8V-3.6V Operation – PIC16LF722/3/4/6/7

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Brown-out Reset (BOR):

- Selectable between two trip points

- Disable in Sleep option

• Programmable Code Protection

• In-Circuit Serial Programming

(ICSP

) via Two

Pins

• Multiplexed Master Clear with Pull-up/Input Pin

• Industrial and Extended Temperature Range

• High-Endurance Flash Cell:

- 1,000 write Flash endurance (typical)

- Flash retention: > 40 years

• Power-Saving Sleep mode



2007-2015 Microchip Technology Inc.

DS40001341F-page 1

Recommended Resources

Single-phase power supply automatic switching circuit controlled by relay

New HI-FI stereo amplifier IC-LM1876

Small program-controlled switch power supply system circuit diagram

Low voltage transformer short circuit protection

Rectification and filtering circuit diagram

Single supply complementary symmetrical circuit

ARM+WinCE6.0 cannot use two USB devices at the same time?: The Friendly Micro2440 board works well when connected to the Internet module of the CDMA 3G USB interface alone, and it also works well when connected to the USB Wifi wireless network card alone. How...; guanliheng Embedded System

[2022 Digi-Key Innovation Design Competition] Material Unboxing STM32F7508-DK: I am very honored to participate in and be shortlisted for the 2022 Digi-Key Innovation Design Competition. I would like to thank EEWORLD and Digi-Key Electronics for providing a platform for electron...; 小米渣 DigiKey Technology Zone

Brothers who have used SQLite under CE, please take a look at this. Regarding the issue of releasing SQLite. What preparations need to be made?: This is my first time to use CE. Please help me. The program code is as follows, which can be run under WinForm project. I copied the code to the project under WINCE. I also added references. After su...; w_ujie The Industrial Cloud

Please help me explain this Verilog code: ...; science361 FPGA/CPLD

About the rom.h file: I am writing some initialization functions, but when compiling, it prompts that these functions ROM_XXXXX are not declared.Error[Li005]: no definition for "ROM_GPIOPinTypeUART" [referenced from E:\Pro...; ultrabenz Microcontroller MCU

Help me find the mistake!: #include char count,a,b,c=0x7e; intial_timer0(); main() { a=0x80; b=0x01; intial_timer0(); while(1) { P0=c; } } intial_timer0() { TMOD=0x01; TH0=-50008; TL0=-5000; EA=1; //Interrupt control, CPU opens...; alvin2263 MCU

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components