PIC18LF26J11-I/ML datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> PIC18LF26J11-I/ML

PIC18LF26J11-I/ML: Description8-BIT, FLASH, 48 MHz, MICROCONTROLLER, PDSO28; CategoryThe embedded processor and controller Microcontrollers and processors; File Size315KB，13 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Download user manual Parametric View All

PIC18LF26J11-I/ML Overview

8-BIT, FLASH, 48 MHz, MICROCONTROLLER, PDSO28

PIC18LF26J11-I/ML Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	QFN
package instruction	6 X 6 MM, 0.55 MM, LEAD FREE, PLASTIC, QFN-28
Contacts	28
Reach Compliance Code	compli
ECCN code	EAR99
Factory Lead Time	13 weeks
Has ADC	YES
Other features	ALSO OPERATES AT 2 V MINIMUM SUPPLY AT 8 MHZ
Address bus width
bit size	8
CPU series	PIC
maximum clock frequency	48 MHz
DAC channel	NO
DMA channel	YES
External data bus width
JESD-30 code	S-PQCC-N28
JESD-609 code	e3
length	6 mm
Humidity sensitivity level	1
Number of I/O lines	23
Number of terminals	28
On-chip program ROM width	16
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	HVQCCN
Encapsulate equivalent code	LCC28,.24SQ,25
Package shape	SQUARE
Package form	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Celsius)	260
power supply	2.5/3.3 V
Certification status	Not Qualified
RAM (bytes)	3776
rom(word)	32768
ROM programmability	FLASH
Maximum seat height	1 mm
speed	48 MHz
Maximum slew rate	15.2 mA
Maximum supply voltage	3.6 V
Minimum supply voltage	2 V
Nominal supply voltage	3 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	NO LEAD
Terminal pitch	0.65 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	40
width	6 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

User Manual

Preview

Download Datasheet

View All

PIC18F46J11

PIC18F46J11 Family

Silicon Errata and Data Sheet Clarification

The PIC18F46J11 family devices that you have received

conform functionally to the current Device Data Sheet

(DS39932D), except for the anomalies described in this

document.

The silicon issues discussed in the following pages are

for silicon revisions with the Device and Revision IDs

listed in

Table 1.

The silicon issues are summarized in

Table 2.

The errata described in this document will be addressed

in future revisions of the PIC18F46J11 family silicon.

Note:

This document summarizes all silicon

errata issues from all revisions of silicon,

previous as well as current. Only the issues

indicated in the last column of

Table 2

apply

to the current silicon revision (A4).

For example, to identify the silicon revision level

using MPLAB IDE in conjunction with a hardware

debugger:

Using the appropriate interface, connect the

device to the hardware debugger.

Open an MPLAB IDE project.

Configure the MPLAB IDE project for the

appropriate device and hardware debugger.

Based on the version of MPLAB IDE you are

using, do one of the following:

a) For MPLAB IDE 8, select

Programmer >

Reconnect.

b) For MPLAB X IDE, select

Window >

Dashboard

and click the

Refresh Debug

Tool Status

icon (

Depending on the development tool used, the

part number

and

Device Revision ID value

appear in the

Output

window.

Note:

If you are unable to extract the silicon

revision level, please contact your local

Microchip sales office for assistance.

Data Sheet clarifications and corrections start on

page 9,

following the discussion of silicon issues.

The silicon revision level can be identified using the

current version of MPLAB

IDE and Microchip’s

programmers, debuggers, and emulation tools, which

are available at the Microchip corporate web site

(www.microchip.com).

The DEVREV values for the various PIC18F46J11

family silicon revisions are shown in

Table 1.

TABLE 1:

SILICON DEVREV VALUES

Part Number

Device

(1)

Revision ID for Silicon Revision

(2)

PIC18F24J11

PIC18F25J11

PIC18F26J11

PIC18F44J11

PIC18F45J11

PIC18F46J11

PIC18LF24J11

PIC18LF25J11

PIC18LF26J11

PIC18LF44J11

PIC18LF45J11

PIC18LF46J11

Note 1:

0x26Ch

0x26Dh

0x26Eh

0x26Fh

0x270h

0x271h

0x272h

0x273h

0x274h

0x275h

0x276h

0x277h

The Device IDs (DEVID and REVID) are located at the last two implemented addresses of configuration memory space.

They are shown in hexadecimal in the format, “DEVID:REVID”.

Refer to the

“PIC18F2XJXX/4XJXX Family Flash Microcontroller Programming Specification”

(DS39687) for detailed

information on Device and Revision IDs for your specific device.



2009-2013 Microchip Technology Inc.

DS80000435K-page 1

Recommended Resources

Lightning protection wiring for direct-match generators of 300kW and below b

Gas sensor leak detection alarm circuit

555 dynamic display LED digital clock equipped with hourly language timekeeping circuit

Simple triangle wave conversion sine wave circuit

845ddr computer motherboard circuit diagram_20

A flashing light experiment based on LM3S301, compiled and tested completely with Proteus 8.0: I recently wanted to spend some time playing around with LM M3/M4. I applied for a few TI boards and tried to use Labview to automatically generate ARM Cortex M3 code on DK-LM3S8962. The experimental ...; 平湖秋月 Microcontroller MCU

How to close the DOS window?: I wrote a self-starting batch program in WINCE OS. Every time CE OS starts, it automatically opens CMD DOS to execute the program. I hope that after DOS executes the batch file, it will automatically ...; tunersys Embedded System

C language version of the time library function file or timestamp conversion algorithm: The timestamp can be obtained from the online interface. Time synchronization data format 1. The standard timestamp is the total number of seconds from 00:00:00 Greenwich Mean Time on January 1, 1970 ...; sint27 MCU

About the writing process of SD card switching driver: Yesterday I asked about expanding the SDIO interface on PXA270, and Shuiyan mentioned that you can use the SD card switching function to switch between different SDIO devices. Since I have never done ...; baobeidudu Embedded System

Radio Frequency Technology RF and Its Origin: From procurement, storage, manufacturing, packaging, loading and unloading/handling, transportation, circulation processing, distribution, sales to service, they are all interlocking business links an...; JasonYoo RF/Wirelessly

To ensure the stability of electronic equipment, what tests need to be done on the hardware?: To ensure the stability of electronic equipment, what tests need to be done on the hardware?...; dianhang Test/Measurement

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components