PIC16LF1823-I/SN datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> PIC16LF1823-I/SN

PIC16LF1823-I/SN: Description8-BIT, FLASH, 32 MHz, RISC MICROCONTROLLER, PDSO8; CategoryThe embedded processor and controller Microcontrollers and processors; File Size4MB，422 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com

Download Datasheet Parametric View All

PIC16LF1823-I/SN Overview

8-BIT, FLASH, 32 MHz, RISC MICROCONTROLLER, PDSO8

PIC16LF1823-I/SN Parametric

Parameter Name	Attribute value
Maker	Microchip
package instruction	SOIC-8
Reach Compliance Code	compli
Has ADC	YES
Address bus width
bit size	8
CPU series	PIC16
maximum clock frequency	32 MHz
DAC channel	NO
DMA channel	NO
External data bus width
JESD-30 code	R-PDSO-G8
length	4.9 mm
low power mode	NO
Number of DMA channels
Number of I/O lines	12
Number of serial I/Os	1
Number of terminals	8
Number of timers	3
On-chip data RAM width	8
On-chip program ROM width	14
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	NO
Package body material	PLASTIC/EPOXY
encapsulated code	SOP
Encapsulate equivalent code	SOP8,.25
Package shape	RECTANGULAR
Package form	SMALL OUTLINE
RAM (bytes)	128
RAM (number of words)	128
rom(word)	2000
ROM programmability	FLASH
Maximum seat height	1.75 mm
speed	32 MHz
Maximum slew rate	3.6 mA
Maximum supply voltage	3.6 V
Minimum supply voltage	1.8 V
Nominal supply voltage	3 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal form	GULL WING
Terminal pitch	1.27 mm
Terminal location	DUAL
width	3.9 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER, RISC

Preview

Download Datasheet

View All

PIC12(L)F1822/16(L)F1823

8/14-Pin Flash Microcontrollers with XLP Technology

High-Performance RISC CPU

• Only 49 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 32 MHz oscillator/clock input

- DC – 125 ns instruction cycle

• Interrupt Capability with Automatic Context

Saving

• 16-Level Deep Hardware Stack with Optional

Overflow/Underflow Reset

• Direct, Indirect and Relative Addressing modes:

- Two full 16-bit File Select Registers (FSRs)

- FSRs can read program and data memory

Extreme Low-Power Management

PIC12LF1822/16LF1823 with XLP

•

Sleep mode: 20 nA @ 1.8V, typical

Watchdog Timer: 300 nA @ 1.8V, typical

Timer1 Oscillator: 650 nA @ 32 kHz, typical

Operating Current: 30 µA/MHz @ 1.8V, typical

Analog Features

• Analog-to-Digital Converter (ADC) module:

- 10-bit resolution, up to 8 channels

- Conversion available during Sleep

• Analog Comparator module:

- Up to two rail-to-rail analog comparators

- Power mode control

- Software controllable hysteresis

• Voltage Reference module:

- Fixed Voltage Reference (FVR) with 1.024V,

2.048V and 4.096V output levels

- 5-bit rail-to-rail resistive DAC with positive

and negative reference selection

Flexible Oscillator Structure

• Precision 32 MHz internal Oscillator Block:

- Factory calibrated to ± 1%, typical

- Software selectable frequencies range of

31 kHz to 32 MHz

• 31 kHz Low-Power Internal Oscillator

• Four Crystal modes up to 32 MHz

• Three External Clock modes up to 32 MHz

• 4X Phase Lock Loop (PLL)

• Fail-Safe Clock Monitor:

- Allows for safe shutdown if peripheral clock

stops

• Two-Speed Oscillator Start-up

• Reference Clock module:

- Programmable clock output frequency and

duty-cycle

Peripheral Highlights

• Up to 11 I/O Pins and 1 Input-Only Pin:

- High current sink/source 25 mA/25 mA

- Programmable weak pull-ups

- Programmable interrupt-on-change pins

• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

• Enhanced Timer1:

- 16-bit timer/counter with prescaler

- External Gate Input mode

- Dedicated, low-power 32 kHz oscillator driver

• Timer2: 8-Bit Timer/Counter with 8-Bit Period

• Enhanced CCP (ECCP) modules:

- Software selectable time bases

- Auto-shutdown and auto-restart

- PWM steering

• Master Synchronous Serial Port (MSSP) with SPI

and I

with:

- 7-bit address masking

- SMBus/PMBus

compatibility

• Enhanced Universal Synchronous Asynchronous

Receiver Transmitter (EUSART) module:

- RS-232, RS-485 and LIN compatible

- Auto-Baud Detect

• Capacitive Sensing (CPS) module (mTouch™):

- Up to 8 input channels

Special Microcontroller Features

•

Full 5.5V Operation – PIC12F1822/16F1823

1.8V-3.6V Operation – PIC12LF1822/16LF1823

Self-Reprogrammable under Software Control

Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

Programmable Brown-out Reset (BOR)

Extended Watchdog Timer (WDT)

In-Circuit Serial Programming™ (ICSP™) via

Two Pins

In-Circuit Debug (ICD) via Two Pins

Enhanced Low-Voltage Programming (LVP)

Operating Voltage Range:

- 1.8V-5.5V (PIC12F1822/16F1823)

- 1.8V-3.6V (PIC12LF1822/16LF1823)

Programmable Code Protection

Self-Programmable under Software Control

•



2010-2015 Microchip Technology Inc.

DS40001413E-page 1

Recommended Resources

How does a fuse resistor work?

Quartz oscillator diseases circuit and calculation-series crystal oscillator

C516A single column vertical lathe electrical schematic circuit 01

Non-inverting AC amplifier circuit composed of LM324

Adjustable voltage stabilized power supply circuit diagram with protection function

Multifunctional high-precision ramp generator circuit diagram

A project made with LM3S8962: There is no digital camera in the office, so the photos taken with the mobile phone are a bit unclear. This is a remote monitoring device motherboard developed based on 8962....; fengzhang2002 Microcontroller MCU

MSP430 MCU UART_FIFO send and receive: There are 2 programs in totalProgram 1 sends:#include msp430x42x.h#define TXBUF_SIZE 32 /*Maximum capacity of transmit FIFO*/unsigned char TX_BUFF[TXBUF_SIZE]; /*Transmit FIFO buffer array*/unsigned i...; Jacktang Microcontroller MCU

Network serial port transparent transmission solution: When I just graduated, I worked as an electromechanical engineer on the spraying line of an automobile company. Factory equipment is becoming more and more intelligent. The engineer who led me can adj...; 我芯永恒 MCU

Help: About the amplitude modulation control of FPGA sine wave generator: My method is: use the SPWM generated by comparing the sine wave with the triangle carrier, and then drive the main circuit to open and close, and adjust the voltage of the main circuit by changing the...; tianheng081 FPGA/CPLD

ADI & Shijian New Infrastructure Series Episode 3 - Answer 5G Instrumentation and Testing Questions to Win Prizes!: ADIShijian New Infrastructure Series Episode 3 - 5G Instrumentation and Testing Questions to Win Gifts! Let's Start~Click here to enter the event5G Instrumentation and Test Analog Devices understands ...; EEWORLD社区 Integrated technical exchanges

trf7960 highly integrated 13.56MHZ RFID reader: Features: Integrated standards ISO14443A/B ISO15693. TIAG-IT and HF-EPC integrated load wave junction acceptance decoding compatible (212KHZ 424KHZ 484KHZ 848KHZ)...; geyong RF/Wirelessly

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components