The UART interrupt I wrote with lm3s811 can only be triggered once! It must be reset once each time before it can be triggered once! What is the reason? ? The code is as follows: #include
#include
#in...
[Remember] Don't forget to set the interface! 1. Set the number of characters for the Tab key indentation in IAR software: Tools-Options-Editor-Tab Size, change the number at the end according to habi...
OverviewFor more than 40 years, industrial process control system designers have worked closely with Analog Devices to define, develop, and implement complete signal chain solutions optimized for a va...
Figure 1 is a block diagram of a resistor production test system based on a 2400 digital source meter, which is used to continuously feed resistors and calibrate them.Figure 1Resistor production test ...
Controller Area Network (CAN) is a type of fieldbus. It is a serial communication network that effectively supports distributed control or real-time control and is recognized as one of the most pro...[Details]
This summary will introduce the transmitter characteristic test of TD terminal products - uplink power control. According to the 3GPP TS34.122 standard, UE uplink power control is divided into uplink ...[Details]
Engineers who are new to wireless design and wireless product development need to master the basics of
RF measurement
. In many cases, this process is to enable engineers who have been engag...[Details]
0 Introduction
Metal halide lamp (MHL) as a green lighting source has been widely used in the field of indoor and outdoor lighting. However, when using this green lighting source, the matc...[Details]
0 Introduction to the direct method of feedback linearization based on dynamic equilibrium state theory
The basic idea of the direct method of feedback linearization based on dynamic equilib...[Details]
Compared with traditional light sources, light-emitting diodes (LEDs) have many advantages, such as low operating voltage, high energy efficiency, small size and directional light. They can provide...[Details]
The overcurrent and overheating coordinated protection technology implemented by polymer positive temperature coefficient devices (PPTC) can protect motors, controllers and electronic components in...[Details]
Semiconductor devices used in high-end computing (advanced microprocessors) and consumer electronics (graphics and gaming chipsets) devices generally provide data rates up to 6.4Gbps through hig...[Details]
Preface
In the analog era, due to the unchanged specifications and relatively simple device connections, as well as users' low requirements for image quality, the relatively simple environment...[Details]
Abstract:
This paper introduces the excitation system designed for 3/3 phase double winding induction generator, which is composed of DSP and FPGA. The interface circuit of the control sys...[Details]
Touch sensors have been in widespread use for many years, but recent advances in mixed-signal programmable devices have made capacitive touch sensors a practical, value-added alternative to mechani...[Details]
Billboards are information display terminals for the public, with a wide range of civil and commercial values. However, most of the information displayed on billboards is currently solidified in th...[Details]
Abstract:
A single pulse secondary radar reply processor implemented with EPLD. Its main functions include: reply frame pulse detection, reply information decoding, assembling reply inf...[Details]
1 Introduction
With the rise of my country's automobile industry, the demand for related in-vehicle electronic products is growing, and has become a research and development hotspot in the...[Details]
0 Introduction
A gyroscope is an instrument that can accurately determine the direction of a moving object. It is an inertial navigation instrument widely used in modern aviation, navigation...[Details]