.100" and .100" x .100", .093" Mating Length, Straight, Solder Tails
• Low profile for close board stacking
• Solder stand-offs to facilitate production wave solder
and board cleaning
• Board pin retention feature available
• See the Regulatory Information Appendix (RIA) in the
"RoHS Compliance" section of www.3Mconnectors.com
for compliance information.
929 Series
Date Modified: February 3, 2012
TS-0816-B
Sheet 1 of 2
Physical
Insulation:
Flammability: UL 94V-0
Material: Glass Filled Polyester (PBT) or PCT
Color: Black
Contact:
Wiping Area & Solder Tails: See ordering information
Underplating: 50 μ [ 1.27 μm ] Nickel
Plating:
Material: Copper Alloy
Marking:
None
Electrical
Current Rating:
2.5 A
Insulation Resistance:
> 5 × 10
9
Ω
at 500 V
DC
Withstanding Voltage:
1500 V
RMS
at Sea Level
Environmental
Temperature Rating:
-40°C to +105°C
Process Rating:
PCT Insulator: 260°C per J-STD-020
Moisture Sensitivity Level:
1 (per J-STD-020C) for PCT insulator only
UL File No.: E68080
PBT Insulator: Maximum insulator temperature 191°C for solder wave process only
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pin Strip Header
.100" and .100" x .100", .093" Mating Length, Straight, Solder Tails
A
( See Note )
.215 Ref
[5.46]
929 Series
A
( See Note )
.115 [2.92]
2X .05 Max
[1.27]
.093 + .008
-.003
0.013
0.056
.100 [2.54]
.015 [0.38]
.110 +.015
-.010
.100 Typ [2.54]
.025
±
.001 Sq Typ
[0.64]
.110 +.015
-.010
.100
±
.003
[2.54]
.100
±
.003
[ 2.54 ]
.100
±
.003
[2.54]
Ο
Ο
.040
±
.003 After Plating
[1.02]
.040
±
.003 After Plating
[ 1.02 ]
C
mm
[Inch]
Tolerance Unless Noted
.0
mm
±.1
.00
±.01
.000
±.005
Recommended Hole Pattern
Note:
A = .10" [2.5] × pin quantity per row. Dimension A is a maximum when the pin strip is cut to length, not when the strip is
broken to length. 2 row parts not recommended to be broken to length.
[ ] Dimensions for Reference Only
Ordering Information
Tin
9X9800-01-XX-XX
Pin Quantity
(01-36)
Plating Suffix:
blank = 100 μ" [2.54 µm] tin-lead,
PBT insulator (RIA E3 & C2 apply)
RK = 200 μ" [5 μm] matte tin,
PCT insulator (RIA E1 & C1 apply)
9X98XX-01-XX-XX
05 = 1 row
15 = 2 row
Board Retention Feature
2 = None
R = Kinked Tails
Gold Plating Suffix
I = 10 μ" [0.25 μm] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10 μ" [0.25 µm] all over, PCT insulator
(RIA E1 & C1 apply)
Pin Quantity per row
(01-36)
([02-72] ÷ 2)
TS-0816-B
Sheet 2 of 2
Gold
Board Retention Feature
2 = None
R = Kinked Tails
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
After turning on the timer interrupt timing, I plan to set TIMX_IER=0X00 (disable interrupt enable bit) somewhere in the main program. Normally, it will not enter the interrupt and return to the main ...
[i=s] This post was last edited by tiankai001 on 2018-2-11 14:16 [/i] [align=left][color=rgb(34, 34, 34)][font="]The overcurrent insurance circuit in the power supply circuit plays an overcurrent prot...
[font=微软雅黑]Requirements: [/font] [font=微软雅黑] Be familiar with ARM application system development, have experience in FAT file system transplantation, image encoding and decoding, USB communication, an...
I used platform builder and CETK that comes with wince to test the driver I just programmed, and then created the main Tux module. Finally, an error occurred when compiling the project: : cannot open ...
Recently, I often see people looking to buy TI DSPs online, and the prices are shockingly high, rising more than 10 times. Is it because TI's production capacity is insufficient, or is the current mar...
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Administration (USPTO) for a patent for a remote vehicle control system that may be used in future ...[Details]
Nios II is a configurable 16-/32-bit RISC processor. Combined with a rich set of peripheral-specific instructions and hardware acceleration units, it provides a highly flexible and powerful SOPC sy...[Details]
Reflow soldering, a common soldering method in modern electronics manufacturing, primarily melts solder paste and pads to form solder joints. With technological advancements, soldering equipment ha...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
Have you ever heard stories about "crazy appliances"? Think of microwaves that turn on automatically or ovens that preheat without any human input? With radios and electromagnetic interfaces ubiqui...[Details]
Overview
As handheld voice communication devices become more and more popular, they are increasingly used in noisy environments, such as airports, busy roads, crowded bars, etc. In such noisy ...[Details]
In the electronics manufacturing industry, surface mount technology (SMT) placement machines are core equipment for production lines. However, with many different models available on the market, ch...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
Intel®
Xeon®
6
-
core processors now support the new Amazon EC2 R8i and R8i-flex instances on Amazon Web Services (AWS).
These new instances offer superior performance and fast...[Details]
There are many motors that can use thyristor speed control, and they can be used in almost all industries. Various types of motors, such as fans, pumps, AC motors, DC motors, torque motors, single-...[Details]
When American cartoonist Chester Gould sketched the watch on Dick Tracy's wrist, he had no idea that science fiction would become reality 70 years later. As a comic strip artist, Gould imagined fut...[Details]
introduction
As core electronic components used in vastly different fields, automotive-grade chips and mobile/consumer-grade chips exhibit significant differences in their...[Details]
Most cameras on the market use chips manufactured by Japanese companies like Sony, Sharp, Panasonic, and LG. South Korea now has the capability to produce chips, but the quality is somewhat inferio...[Details]
According to Reuters, citing people familiar with the matter, British semiconductor design company Arm Holdings (NASDAQ:ARM) has hired Rami Sinno, head of Amazon's (NASDAQ:AMZN) artificial intellig...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
