I had nothing to do recently, so I played with F28027. I found a problem during programming and debugging. It was very strange, and I haven't found the answer yet. The hardware connection is that port...
I designed a module written in Verilog in SOPC . In the module, I used the following statement parameter Ele_True = 8'b01010100; but when compiling and simulating , Ele_True becomes a 9-bit binary wit...
[b][size=3]CircuitPython 4.0.0 is officially released!!! [/size][/b] CircuitPython 4.0.0 now supports many new boards, check out the new circuitpython.org/downloads page for a complete list. The lates...
Can the ADC interrupt of 28335 be set to trigger the interrupt after all channels are converted? Do not trigger an interrupt after converting one channel. Refer to the datasheet. Whether the INT_MOD_S...
1. Interference between digital circuit modules and analog circuit modules [size=4] If the analog circuit (RF) and the digital circuit work separately, they may work well. However, once the two are pl...
Does anyone have it? Please help me. I beg you. As long as it can be turned from one angle to another, thank you. If you have it, please send it to 993789565@qq.com....
0 Introduction
With the development of my country's economy, the number of motor vehicles continues to increase. The growth of existing roads and other hardware facilities can no longer meet t...[Details]
Analog engineers have traditionally struggled with complexity when designing power supplies that required multiple outputs, dynamic load sharing, hot-swap, or extensive fault-handling capabilities....[Details]
The reason for the light decay of white LEDs: the decline of phosphor performance
So far, the rapid decline of the luminous performance of white light LEDs, especially low-power white light LE...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
Key Points
1. Now, in addition to high-end smartphones and tablets, users also expect to use touch screens in other applications, and they are gradually appearing in cars and instruments.
...[Details]
The power consumption of a switching power supply includes fixed losses caused by parasitic resistances such as semiconductor switches, magnetic components, and wiring, as well as switching losses ...[Details]
Today's automotive application developers face numerous design challenges as modern cars add more electronic functionality, while the need for lower power consumption and smaller printed circuit bo...[Details]
SL11R is a 16-bit RISC microcontroller with a USB interface produced by Scanlogic. Its core processing speed reaches 48MIPS. It has rich hardware resources and 32-bit programmable I/O ports, and ca...[Details]
Abstract: Based on FPGA hardware, the image scaling with fixed magnification is realized. The 2D convolution operation is decomposed into 2 1D convolution operations. The input original image pixel...[Details]
: Ambiguous operators need parenthesesAmbiguous
symbol ``xxx``Argument
list syntax errorArray
bounds
missingArray
size
toolargeBad
character
in paramentersBad
file
name format in i...[Details]
Example of multitasking and resource reuse of programs
There is an electromechanical device with two buttons that control two different parts of the device.
Now the requirement is:
wh...[Details]