MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
FEATURES
Approved to EN 140401-803
AEC-Q200 qualified
Advanced thin film technology
Superior stability: Class 0.05
Wide precision range: 10
to 1 M
Matte Sn termination on Ni barrier layer
Compliant to RoHS Directive 2011/65/EU
APPLICATIONS
Test and measuring equipment
Industrial and medical electronics
MMU 0102, MMA 0204 and MMB 0207 precision thin film
MELF resistors combine the proven reliability of the
professional products with an advanced level of precision
and stability. Therefore they are perfectly suited for
applications in the fields of test and measuring equipment
along with industrial and medical electronics.
METRIC SIZE
DIN
CECC
0102
RC 2211M
0204
RC 3715M
0207
RC 6123M
TECHNICAL SPECIFICATIONS
DESCRIPTION
Metric CECC size
Resistance range
Resistance tolerance
Temperature coefficient
Operation mode
Rated dissipation,
P
70 (1)
Operating voltage,
U
max.
AC/DC
Permissible film temperature,
F
max.
Operating temperature range
Max. resistance change at
P
70
for resistance range,
R/R
max., after:
1000 h
8000 h
225 000 h
Permissible voltage against
ambient (insulation):
1 min,
U
ins
Continuous
Failure rate: FIT
observed
200 V
75 V
300 V
75 V
0.1
x 10
-9
/h
500 V
75 V
85
C
- 10 °C
to 85 °C
Precision
0.06 W
150 V
125
C
- 55 °C
to 125 °C
85
C
- 10 °C
to 85 °C
Standard
0.2 W
MMU 0102
RC 2211 M
22
to 332 k
MMA 0204
RC 3715 M
10
to 511 k
± 25 ppm/K; ± 15 ppm/K
Precision
0.07 W
200 V
125
C
- 55 °C
to 125 °C
85
C
- 10 °C
to 85 °C
Standard
0.25 W
Precision
0.11 W
300 V
125
C
- 55 °C
to 125 °C
Standard
0.4 W
MMB 0207
RC 6123 M
15
to 1 M
± 0.25 %; ± 0.1 %
± 0.5 %; ± 0.25 %; ± 0.1 %
22
to 332 k
0.05 %
0.1 %
0.3 %
0.1
%
0.2
%
0.6 %
10
to 511 k
0.05 %
0.1
%
0.3
%
0.1 %
0.2
%
0.6 %
15
to 1 M
0.05
%
0.1 %
0.3 %
0.1
%
0.2
%
0.6 %
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
(1)
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heatflow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded.
Document Number: 28714
Revision: 05-Mar-12
For technical questions, contact:
melf@vishay.com
www.vishay.com
41
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
DIMENSIONS
Precision MELF Resistors
L
K
L
1
D
1
D
DIMENSIONS AND MASS
TYPE
MMU 0102
MMA 0204
MMB 0207
L
(mm)
2.2 + 0/- 0.1
3.6 + 0/- 0.2
5.8 + 0/- 0.15
D
(mm)
1.1 + 0/- 0.1
1.4 + 0/- 0.1
2.2 + 0/- 0.2
L
1 min.
(mm)
1.2
1.8
3.2
D
1
(mm)
D + 0/- 0.1
D + 0/- 0.15
D + 0/- 0.2
K
(mm)
0.4 ± 0.05
0.8 ± 0.1
1.15 ± 0.1
MASS
(mg)
8
22
80
Note
• Color code marking is applied according to IEC 60062
(3)
in five bands. Each color band appears as a single solid line, voids are permissible
if at least
2
/
3
of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider than the other
bands. An interrupted band between the 4
th
and 5
th
full band indicates the temperature coefficient (yellow = TC25, orange = TC15).
PATTERN STYLES FOR MELF RESISTORS
G
Y
Z
X
RECOMMENDED SOLDER PAD DIMENSIONS
WAVE SOLDERING
TYPE
G
(mm)
0.7
1.5
2.8
Y
(mm)
1.2
1.5
2.1
X
(mm)
1.5
1.8
2.6
Z
(mm)
3.1
4.5
7.0
G
(mm)
1.1
1.7
3.2
REFLOW SOLDERING
Y
(mm)
0.8
1.2
1.7
X
(mm)
1.3
1.6
2.4
Z
(mm)
2.7
4.1
6.6
MMU 0102
MMA 0204
MMB 0207
Note
• The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in
publication IPC-7351. They do not guarantee any supposed thermal properties, however, they will be found adequate for most general
applications.
www.vishay.com
42
For technical questions, contact:
melf@vishay.com
Document Number: 28714
Revision: 05-Mar-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MMU 0102, MMA 0204, MMB 0207 - Precision
Vishay Beyschlag
Precision MELF Resistors
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TCR
± 25 ppm/K
± 15 ppm/K
DESCRIPTION
TOLERANCE
± 0.25 %
± 0.1 %
± 0.5 %
± 0.25 %
± 0.1 %
MMU 0102
47
to 332 k
100
to 221 k
22
to 100 k
47
to 100 k
100
to 100 k
RESISTANCE
MMA 0204
22
to 511 k
43
to 511 k
10
to 332 k
22
to 332 k
43
to 332 k
MMB 0207
15
to 1 M
33
to 1 M
-
-
33
to 1 M
Notes
• Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
• Resistance values to be selected from E24 and E192 series, for other values please contact the factory.
• Approval to EN 140401-803, “Version A”, is not available for ± 15 ppm/K; ± 0.5 %.
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. A homo-
geneous film of metal alloy is deposited on a high grade
ceramic body (Al
2
O
3
) and conditioned to achieve the desired
temperature coefficient. Nickel plated steel termination caps
are firmly pressed on the metallised rods. A special laser is
used to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
A further conditioning is applied in order to stabilise the
trimming result. The resistor elements are covered by a
protective coating designed for electrical, mechanical and
climatic protection. The terminations receive a final pure tin
on nickel plating. Five color code rings designate the
resistance value and tolerance in accordance with
IEC 60062
(3)
.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. This includes pilse load screening (for
R
10
)
and additional non-linearity screening (for
R
30
)
for the elimination of products with a potential risk of early life
failures according to EN 140401-803, 2.1.2.2. Only accepted
products are laid directly into the blister tape in accordance
with
IEC 60286-3, Type II
(3)
or bulk case in accordance with
IEC 60286-6
(3)
.
All products comply with the
GADSL
(1)
and the
CEFIC- EECA-EICTA
(2)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
2000/53/EC End of Vehicle life Directive (ELV) and Annex II
(ELV II)
2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components to the detail
specification
EN 140401-803
which refers to
EN 60115-1,
EN 140400
and the variety of environmental test procedures
of the
IEC 60068
(3)
series.
Conformity is attested by the use of the
CECC
logo (
) as
the mark of conformity on the package label.
Vishay Beyschlag has achieved
“Approval of
Manufacturer”
in accordance with
IEC QC 001002-3,
clause 2.
The release certificate for
“Technology Approval
Schedule”
in accordance with
CECC 240001
based on
IEC QC 001002-3, clause 6
is granted for the
Vishay Beyschlag manufacturing process.
The resistors are qualified according to AEC-Q200.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1
(3)
. Solderability is specified for 2 years after
production or requalification, however, excellent solderability
is proven after extended storage in excess of 10 years. The
permitted storage time is 20 years.
The resistors are completely lead (Pb)-free, the pure tin
plating provides compatibility with lead (Pb)-free soldering
processes. The immunity of the plating against tin whisker
growth has been proven under extensive testing.
The encapsulation is resistant to all cleaning solvents
commonly used in the electronics industry, including
alcohols, esters and aqueous solutions. The suitability of
conformal coatings, if applied, shall be qualified by
appropriate means to ensure the long-term stability of the
whole system.
RELATED PRODUCTS
For thin film products with a wider resistance, see the
datasheet:
• “Professional MELF Resistors”
(www.vishay.com/doc?28713)
For products with tighter precision specification, see the
datasheet:
• “High Precision MELF resistors”
(www.vishay.com/doc?28715)
Resistors are available with established reliability in
accordance with
EN 140401-803 Version E.
Please refer to
datasheet “MELF Resistors with Established Reliability”
(www.vishay.com/doc?28707).
Notes
(1)
Global Automotive Declarable Substance List, see
www.gadsl.org.
(2)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
www.eicta.org/index.php?id=995
issues
environment policy
chemicals
chemicals for electronics.
(3)
The quoted IEC standards are also released as EN standards with the same number and identical contents.
www.vishay.com
44
For technical questions, contact:
melf@vishay.com
Document Number: 28714
Revision: 05-Mar-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Download Centre
京公网安备 11010802033920号
EEWORLD
