I have a 28377S board, and I also had a 28379D board that burned out when using ADC. Recently, I want to use a CAN bus, so I found the 28377S board and entered the product page of TMS320F28377S. There...
I would like to ask if the edge-based program development is compatible with the gprs-based development code? Or do I need to write code based on the characteristics of edge? Where can I find relevant...
This article has no tests, but designs the hardware expansion part and designs a peripheral CAN communication test board on the expansion port of the development board.1. Test board design picture2. P...
Matlab Support Package for Raspberry Pi provides access functions to external interfaces such as LED, GPIO, I2C, SPI, and UART. This article uses the hardware interface of the previous article "Playin...
The right end of the circuit capacitor uses nmos to control the input voltage signal of 30hz and 2us conduction time. What is the output of the left end of this circuit? How to calculate it quantitati...
[i=s]This post was last edited by Jacktang on 2019-2-13 19:52[/i] MOS tubes often heat up during circuit design, and the heating of MOS tubes indicates that it is operating incorrectly. In order to pr...
1. Several nouns
ABI:
The specifications that an executable file must follow in order to run in a specific execution environment;
Separately generated relocatabl...[Details]
ISP devices, such as field programmable devices (FPGAs and CPLDs), do not require a programmer. Using programming kits provided by the device manufacturer, they employ a top-down modular design app...[Details]
Whether it is an electric car or an ordinary fuel car, for the vast majority of car buyers, the final cost of use is what they care about most. For fuel cars, how to save fuel is what drivers care ...[Details]
Since the beginning of this year, price wars have intensified, new models have been launched one after another, used cars with zero kilometers have become a hot topic, and the industry's internal c...[Details]
While the current industry consensus is that autonomous vehicles are robots and that their systems are managed using robotics-developed thinking, there are also cases where autonomous driving is ac...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
To improve the lateral active safety of intelligent connected vehicles, the identification and definition of unexpected functional safety scenarios for the EPS (Electronic Steering System) ...[Details]
Previously, Positive Motion Technology shared with you the firmware upgrade of motion controller, ZBasic program development, ZPLC program development, communication with touch screen and input/out...[Details]
introduction
In recent years, multi-touch has emerged as a new alternative to traditional human-computer interaction. It eliminates the need for keyboards and mice, enabling simultaneous inter...[Details]
In camera and display systems, the demand for high-performance and low-power data interfaces is driving continuous technological evolution. The evolution of MIPI D-PHY and MIPI C-PHY clearly ...[Details]
Generally not, but there are exceptions. For example, a torque motor controller with three-phase output voltage imbalance can cause current imbalance, similar to a phase loss. However, only two pha...[Details]
What is the difference in response time when the output uses cyclic refresh and direct refresh?
The time required from when the PLC receives an input signal to when the PLC outputs a con...[Details]
Editor's Note: The development of the embodied/humanoid industry is currently gaining momentum. Application and technological breakthroughs in key components have become key requirements for the de...[Details]
Introduction
Currently, IoT-related applications, including those enabling furniture display panels, industrial control display panels, handheld devices, and facial recognition, are gradually s...[Details]