EEWORLDEEWORLDEEWORLD

Part Number

Search

OC-160-CJB-308CA-10.0MHZ

Description
Sine Output Oscillator, 10MHz Nom,
CategoryPassive components    oscillator   
File Size63KB,2 Pages
ManufacturerMicrosemi
Websitehttps://www.microsemi.com
Download Datasheet Parametric View All

OC-160-CJB-308CA-10.0MHZ Overview

Sine Output Oscillator, 10MHz Nom,

OC-160-CJB-308CA-10.0MHZ Parametric

Parameter NameAttribute value
MakerMicrosemi
Reach Compliance Codecompli
Ageing0.3 PPM/YEAR
Frequency Adjustment - MechanicalNO
frequency stability0.03%
Frequency Stability - Voltage0.0005 ppm
input power2.5 W
Installation featuresTHROUGH HOLE MOUNT
offset frequency1 kHz
Nominal operating frequency10 MHz
Maximum operating temperature50 °C
Minimum operating temperature
Oscillator typeSINE
Output impedance50 Ω
Output level0.5 V
Oven power supply voltage5V
phase noise-145 dBc/Hz
physical size36.07mm x 27.18mm x 19.3mm
Nominal supply voltage5 V
surface mountNO
Preheating power6 W
Maximum warm-up time4 Minute
Oven Controlled Crystal Oscillators (OCXO’s)
OC-160 Series (CO-730C)
Description:
The OC-160 Series offers low aging and excellent stability
options with quick warm-up performance with a standard
European CO-08 footprint.
Features:
Frequencies: 5, 10, 12.8, 13, 16.384, 19.44, 20, 20.48 MHz
European CO-08 Package
Excellent Temperature Stability
Superior Aging Characteristics
Very Fast Warm-up
Performance Characteristics
Parameter
Standard
Frequencies:
Package Size:
Supply Voltage:
Input Power:
Output Type:
Output Level (HCMOS):
Rise/Fall Time tr/tf (HCMOS):
Symmetry (Duty/Cycle,HCMOS):
Harmonics/subs:
Spurious:
Temperature Stability:
Characteristics
5, 10, 12.8, 13, 16.384, 19.44, 20, 20.48 MHz, Available 1 MHz to 80 MHz
35.3 x 26.9 x 19.4 mm (1.4” x 1.06” x 0.76”)
A:
15 Vdc ±5%
B:
12 Vdc ±5%
C:
5 Vdc ±5%
<6W turn-on (-20
o
C/70°C);
A:
HCMOS
<2.5W steady-state @ +25°C (-20°C/70°C)
K:
Sinewave ( >+10 dBm into 50 ohm)
Aging:
Short Term Stability (Allan Deviation):
Phase Noise (Typical @ 10 MHz):
Frequency vs. Supply:
Warm-up (Restabilization):
(Frequency relative to two hours after
turn-on following 24 hours off time
at +25
o
C with a maximum ambient
of <70
o
C)
Electrical Frequency Adjust:
Mechanical Configuration:
J:
Sinewave ( >+7 dBm into 50 ohm)
L:
Sinewave ( >+13 dBm into 50 ohm)
“0” <0. 5V, “1” >4.5V
(HCMOS)
<10 ns (10% - 90%)
(HCMOS)
50/50 ±10% (@50% level)
(HCMOS)
-20 dBc (reduced level sinewave, for optional output)
-70 dBc (for sinewave output)
B-308:
±3 x 10
-8 over
0/50°C
B-109:
±1 x 10
-9 over
0/50°C
D-508:
±5 x 10
-8 over
-20/70°C
D-509:
±5 x 10
-9 over
-20/70°C
Note: Tighter stability options
F-107:
±1 x 10
-7 over
-40/85°C
are available, contact factory.
F-108:
±1 x 10
-8 over
-40/85°C
A:
1 x 10
-8
/day, 2x10
-6
/year
B:
3 x 10
-9
/day, 1x10
-6
/year
C:
1 x 10
-9
/day, 3x10
-7
/year
D:
5 x 10
-10
/day, 1x10
-7
/year
5 x 10
-11
/second (with aging
A
or
B);
5 x 10
-12
/second (with aging
C
or
D)
With Aging:
A or B
Aging: C or D
10 Hz
-100 dBc/Hz
-120 dBc/Hz
100 Hz
-135 dBc/Hz
-140 dBc/Hz
1 kHz
-145 dBc/Hz
-145 dBc/Hz
10 kHz
-150 dBc/Hz
-150 dBc/Hz
50 kHz
-150 dBc/Hz
-150 dBc/Hz
2 x 10-9 per % change in supply (with Aging
A
or
B)
5 x 10-10 per % change in supply (with Aging
C
or
D)
With Aging:
A or B
Aging: C or D
-6
: 6 minutes 1 x 10
-6
: 2 minutes
1 x 10
1 x 10
-7
: 8 minutes 1 x 10
-7
: 2.5 minutes
3 x 10
-8
: 10 minutes 3 x 10
-8
: 3 minutes
3 x 10
-8
: 30 minutes 1 x 10
-8
: 4 minutes
10 x 10-6 typical range (with Aging
A or B)
2 x 10-6 typical range (with Aging
C
or
D)
Pins for PCB mounting
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
46
Please guide me on the PID algorithm of msp430
Please give me some guidance, or give me a PID source code, thank you...
longge1 Embedded System
What address is the uboot of Ti am335x loaded into memory when running?
Recently, when burning the file system in uboot, errors always occur. I suspect that there is a conflict with the memory area of uboot during burning. How can I find the address of uboot in memory whe...
lilingshui TI Technology Forum
One of the reasons why you cannot enter the main function
Unable to enter the main function because of the use of printf function: Solution 1: When using library functions such as printf, you need to write low-level functions such as _sys_exit(). According t...
fish001 Microcontroller MCU
Raspberry Pi PICO keeps reporting the error "Device is busy or does not respond. Your options:"
When using thonny IDE to connect to pico, it will show Device is busy or does not respond. Your options:- wait until it completes current work;- use Ctrl+C to interrupt current work;- use Stop/Restart...
箩灬卟 MicroPython Open Source section
Help: Can't boot normally after changing EBOOT?
I added a GPIO setting in the OEMPlatformInit function of EBOOT, which caused it to not run properly, and the prompt is as follows. It seems that the partition table has been changed. What is the prob...
xiaoyuanhb09 Embedded System
iPhone 8 gets infected without a condom
The iPhone 8 shell is almost identical to the iPhone 7, and the double glass material on the back is the biggest highlight of Apple. However, everything has its pros and cons. The biggest advantage is...
yedaochang Talking

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2570  2051  1857  1402  2496  52  42  38  29  51 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号