Prosafe Trapped Key Interlock Switches
Bolt Interlocks
Specifications
Standards
Category
Approvals
EN292-1&2, EN1088, ISO12100-1&2,
ISO14119, AS4024.1
Cat. 1 per EN 954-1 (ISO 13849-1)
Suitable for Cat. 2, 3, or 4 systems
BG, CE marked for all applicable
directives and C-Tick not required
-40°C to +200°C (-40°F to +392°F)
100,000
15.1kN (3398lbs)
14Nm (124lb•in)
95% RH
(SBL) 0.60kg (1.32lbs)
(DBL) 1.10kg (2.43lbs)
316L Stainless Steel
SBL 2 x M5 Counterbored from Top or
2 x M5 from Underside with M5 Nuts
DBL 4 x M5 Counterbored from Top or
4 x M5 from Underside with M5 Nuts
15mm (0.59in) Ø
Single
Dual
Operating Temperature
Mechanical Operations
Max. Shear Force to Key
Max. Torque to Key
Humidity
Weight
Material
Mounting
Description
The bolt interlocks are designed to allow access to hazardous areas
when an appropriate key is inserted into the interlock. These bolt
interlocks are manufactured in 316L stainless steel to provide a
rugged, industrial grade method of helping prevent access through
gates.
One advantage of the bolt interlocks is that there is no need to run
power wires to the gate. Power is disconnected by a trapped key
rotary switch on a control panel and the key is then hand-carried to
the gate by the operator.
The Single Bolt interlock (SBL) is designed to be used to access
hazardous areas where partial body exposure is required. The SBL is
not shipped with a key. If two keys are needed for partial body
access, select the Dual Bolt interlock (DBL) that requires both keys
to be trapped to operate. This version of the DBL does not include
the keys.
When whole body access is needed, the DBL, with one primary key
and one secondary trapped key (included) should be used. The
secondary key serves the function of a personnel key. This DBL
allows the operator to carry the personnel key into the hazardous
area. When the operator returns from the hazardous area and
returns the personnel key to the DBL, the locking sequence can be
reversed and the process re-started.
Bolt
Features
•
•
•
•
•
•
•
316L Stainless steel construction
Single or dual key units
Various extensions of bolt
Direct drive push/pull operation
Replaceable code barrel assembly
Fitted with tamper resistant screws
Weatherproof stainless steel dust cap as standard
The Prosafe Advantage
Stainless steel
construction.
5-20
Prosafe Trapped Key Interlock Switches
Bolt Interlocks
Product Selection
Type
Trapped Condition
Key Trapped to
Bolt Retract
Bolt Retracted—mm (inches)
0
3 (0.11)
6 (0.23)
12 (0.47)
0
3 (0.11)
6 (0.23)
13 (0.51)
0mm
3 (0.11)
6 (0.23)
13 (0.51)
Bolt Extended—mm (inches)
14 (0.55)
17 (0.66)
20 (0.78)
27 (1.06)
14 (0.55)
17 (0.66)
20 (0.78)
27 (1.06)
14 (0.55)
17 (0.66)
20 (0.78)
27 (1.06)
Catalogue Number
440T
-MSBLE10➊
440T
-MSBLE11➊
440T
-MSBLE12➊
440T
-MSBLE13➊
440T
-MDBLE10➊➊
440T
-MDBLE11➊➊
440T
-MDBLE12➊➊
440T
-MDBLE13➊➊
440T
-MDBLE14➊➋
440T
-MDBLE15➊➋
440T
-MDBLE16➊➋
440T
-MDBLE17➊➋
Single Key
Both Keys Trapped to
Retract Bolt
Dual Key
Primary Key Trapped,
Secondary Key Free to
Retract Bolt
➊
Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection.
➋
Substitute the desired secondary code for this symbol (key included). See page 5-6 for code selection.
Accessories
Description
Replacement Key
Replacement Code Barrel
Replacement Dust Cap
Page Number
5-33
Catalogue Number
440T
-AKEYE10⊗
440T
-ASCBE14➊
440T
-ASFC10⊗
➊
Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection.
⊗
Substitute the desired code for this symbol. See page 5-6 for code selection.
Approximate Dimensions—mm (inches)
Dimensions are not intended to be used for installation purposes.
Single Key Bolt Interlock
2 x M5
44.5 (1.75)
3.5 (0.13)
44.5 (1.75)
Dual Key Bolt Interlock
4 x M5
15.8
(0.62)
57.7 (2.27)
48.5
(1.90)
48.5
(1.90)
Secondary
3.5
(0.13)
30.5
(1.2)
Primary
3.5 (0.13)
57.7 (2.27)
Code Barrel
Screws M4 x 8
Torx Head
28.5 (1.22) & 30
(1.18) Pitches
15 (0.59)
Bolt Dia.
20 (0.79) Boss Dia.
36.3 (1.42)
M5 Fixing using
Nut Recesses
Weather Cap
for Front Mntg Lock Screw (M5)
29
(1.14)
➋
28.5 (1.22) &
30 (1.18)
15.8 (0.62)
Pitches
Code Barrel
20 (0.79)
Screws M4 x 8
Boss Dia.
Torx Head
Weather
Cap Lock
Screw (M5)
15 (0.59)
Bolt Dia.
➋
5.8
(0.22)
25.4 27.4
(1.0) (1.07)
30
(1.18)
59.7 (2.35)
65.5 (2.57)
Key Trapped Bolt Retracted
12
(0.47)
30
(1.18)
25.4 27.4
(1.0) (1.07)
124 (4.88) Max
M5 Fixing using
Nut Recesses
for Front Mntg
12
(0.47)
➋
Standard Retracted Projections 0, 3, 6 & 13 (0, 0.11, 0.23 & 0.51) Extension 14 (0.55)
5-21
stm32/stm8
京公网安备 11010802033920号
EEWORLD
