By Brian King and Dave Parks, Application Engineers, Texas Instruments Automotive audio amplifiers typically use a boost converter to generate the 18 V to 28 V (or higher) battery output voltage. In t...
1. Connect the emulator to the DSP in debug mode. In debug mode, turn the DIP switch to 11111 and connect the emulator to the JTAG interface.In CCS, click View and then click Target Configurations.Rig...
Hello everyone: I have something to ask for your advice. Recently, I have been developing a program on WinCE6.0, which involves bus access, that is, reading and writing a fixed physical address. Do I ...
Lesson 10: How to start the development board 1. What does the startup mode of the development board refer to? Startup mode: After ARM is powered on, from which hardware medium does it load the first ...
The serial port uses RS422, and the conversion chip uses MAX3490. I don't know how to connect MAX3490 with stm32. Please drop a group of masters to smash me to death:time:...
Regarding the reference source, I need to use two reference voltages, 1.25V and 2.5V, in my circuit. a: 1.25V is used as a constant current source b: 2.5V is used as a reference voltage for ADC. The q...