S29NS-R MirrorBit
®
Flash Family
S29NS01GR, S29NS512R, S29NS256R, S29NS128R
1024/512/256/128 Mb (64/32/16/8 M x 16 bit)
1.8 V Burst Simultaneous Read/Write,
Multiplexed MirrorBit Flash Memory
Data Sheet
(Retired Product)
S29NS-R MirrorBit
®
Flash Family Cover Sheet
This product family has been retired and is not recommended for designs. For new and current designs,
S29NS512P supersedes S29NS512R. S29VS256R and S29VS128R supersedes S29NS256R and
S29NS128R respectively. This is the factory-recommended migration path. Please refer to the S29NS-P and
S29VS-R data sheets for specifications and ordering information.
Availability of this document is retained for reference and historical purposes only.
Publication Number
S29NS-R_00
Revision
06
Issue Date
January 28, 2014
Da ta
Shee t
(Retire d
Pro duct)
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or V
IO
range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
2
S29NS-R MirrorBit
®
Flash Family
S29NS-R_00_06 January 28, 2014
S29NS-R MirrorBit Flash Family
®
S29NS01GR, S29NS512R, S29NS256R, S29NS128R
1024/512/256/128 Mb (64/32/16/8 M x 16 bit)
1.8 V Burst Simultaneous Read/Write,
Multiplexed MirrorBit Flash Memory
Data Sheet
(Retired Product)
This product family has been retired and is not recommended for designs. For new and current designs, S29NS512P
supersedes S29NS512R. S29VS256R and S29VS128R supersedes S29NS256R and S29NS128R respectively. This is
the factory-recommended migration path. Please refer to the S29NS-P and S29VS-R data sheets for specifications and
ordering information.
Availability of this document is retained for reference and historical purposes only.
Features
Single 1.8 V read/program/erase (1.70–1.95 V)
65 nm MirrorBit Technology
Multiplexed Data and Address for reduced I/O count
Simultaneous Read/Write operation
32-word Write Buffer
Sixteen-bank architecture
Four 32 KB sectors at the top of memory array, for NS256R
and NS128R
1024 128 KB sectors (NS01GR), 512 128 KB (NS512R), 255/
127 128 KB sectors (NS256/128R)
Programmable linear (8/16) with wrap around and continuous
burst read modes
Secured Silicon Sector region consisting of 128 words each
for factory and customer
10-year data retention (typical)
Cycling Endurance: 100,000 cycles per sector (typical)
RDY output indicates data available to system
Command set compatible with JEDEC (42.4) standard
Hardware sector protection via V
PP
pin
Handshaking by monitoring RDY
Offered Packages
– NS01GR: Offered only as MCP or PoP
– NS512R: 64-ball FBGA (8 mm x 9.2 mm)
– NS256R/NS128R: 44-ball FBGA (6.2 mm x 7.7 mm)
Low V
CC
write inhibit
Write operation status bits indicate program and erase
operation completion
Suspend and Resume commands for Program and Erase
operations
Asynchronous program operation, independent of burst
control register settings
V
PP
input pin to reduce factory programming time
Support for Common Flash Interface (CFI)
General Description
The Spansion S29NS01G/512/256/128R are MirrorBit flash products fabricated on 65 nm process technology. These burst
mode flash devices are capable of performing simultaneous read and write operations with zero latency on two separate banks
using multiplexed data and address pins. These products can operate up to 104 MHz and use a single V
CC
of 1.7 V to 1.95 V
that makes them ideal for the demanding wireless applications of today that require higher density, better performance, and
lowered power consumption.
Publication Number
S29NS-R_00
Revision
06
Issue Date
January 28, 2014
Da ta
Shee t
(Retire d
Pro duct)
Performance Characteristics
Read Access Times
Speed Option (MHz)
Max. Synch. Latency, ns (t
IACC)
Max. Synch. Burst Access, ns (t
BACC)
Max. Asynch. Access Time, ns (t
ACC
)
Max OE# Access Time, ns (t
OE
)
104
75
7
80
15
Current Consumption (typical values)
Continuous Burst Read @ 104 MHz
Simultaneous Operation @ 66 MHz
Program/Erase
Standby Mode
40 mA
66 mA
20 mA
20 µA
Typical Program & Erase Times
Single Word Programming
Effective Write Buffer Programming (V
CC
) Per Word
Effective Write Buffer Programming (V
PP
) Per Word
Sector Erase (16 Kword Sector)
Sector Erase (64 Kword Sector)
170 µs
9.4 µs
4.8 µs
350 ms
800 ms
4
S29NS-R MirrorBit Flash Family
®
S29NS-R_00_06 January 28, 2014
Data
She et
(R eti r ed
Product)
Table of Contents
Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Description
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Performance Characteristics
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.
2.
3.
4.
Ordering Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.1
Valid Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Input/Output Descriptions & Logic Symbol
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Block Diagrams
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Physical Dimensions/Connection Diagrams
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2
Special Handling Instructions for FBGA Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Product Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Address Space Maps
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1
Data Address & Quantity Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2
Flash Memory Array. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3
Device ID and CFI (ID-CFI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device Operations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1
Device Operation Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2
Asynchronous Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3
Synchronous (Burst) Read Mode and Configuration Register. . . . . . . . . . . . . . . . . . . . . . . .
7.4
Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5
Blank Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6
Simultaneous Read/Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.7
Writing Commands/Command Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.8
Program/Erase Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.9
Handshaking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.10 Hardware Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.11 Software Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sector Protection/Unprotection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.1
Sector Lock/Unlock Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2
Sector Lock Range Command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3
Hardware Data Protection Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4
SSR Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5
Secure Silicon Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Conservation Modes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.1
Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2
Automatic Sleep Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3
Output Disable (OE#). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.1 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2 Operating Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.3 DC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.4 AC Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.5 Key to Switching Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.6 V
CC
Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.7 CLK Characterization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.8 AC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
17
18
22
24
25
25
26
32
35
35
36
36
43
43
43
44
44
44
45
45
46
48
48
48
48
49
49
49
50
51
52
52
53
53
5.
6.
7.
8.
9.
10.
11.
Appendix
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
11.1 Command Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
11.2 Device ID and Common Flash Memory Interface Address Map . . . . . . . . . . . . . . . . . . . . . . 64
Revision History
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
12.
January 28, 2014 S29NS-R_00_06
S29NS-R MirrorBit
®
Flash Family
5
京公网安备 11010802033920号
EEWORLD
