TS87C51RD2-MIED datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> TS87C51RD2-MIED

TS87C51RD2-MIED: DescriptionMicrocontroller, 8-Bit, OTPROM, 8051 CPU, 40MHz, CMOS, PQFP44, 1.40 MM HEIGHT, VQFP-44; CategoryThe embedded processor and controller Microcontrollers and processors; File Size447KB，74 Pages; ManufacturerAtmel (Microchip)

Download Datasheet Parametric View All

TS87C51RD2-MIED Overview

Microcontroller, 8-Bit, OTPROM, 8051 CPU, 40MHz, CMOS, PQFP44, 1.40 MM HEIGHT, VQFP-44

TS87C51RD2-MIED Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Maker	Atmel (Microchip)
Parts packaging code	QFP
package instruction	LQFP, QFP44,.5SQ,32
Contacts	44
Reach Compliance Code	compli
ECCN code	3A991.A.2
Has ADC	NO
Address bus width	16
bit size	8
CPU series	8051
maximum clock frequency	40 MHz
DAC channel	NO
DMA channel	NO
External data bus width	8
JESD-30 code	S-PQFP-G44
JESD-609 code	e0
length	10 mm
Humidity sensitivity level	1
Number of I/O lines	32
Number of terminals	44
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	LQFP
Encapsulate equivalent code	QFP44,.5SQ,32
Package shape	SQUARE
Package form	FLATPACK, LOW PROFILE
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
power supply	5 V
Certification status	Not Qualified
RAM (bytes)	1024
rom(word)	65536
ROM programmability	OTPROM
Maximum seat height	1.6 mm
speed	40 MHz
Maximum slew rate	27 mA
Maximum supply voltage	5.5 V
Minimum supply voltage	4.5 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	Tin/Lead (Sn/Pb)
Terminal form	GULL WING
Terminal pitch	0.8 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	30
width	10 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

Preview

Download Datasheet

View All

TS80C51RA2/RD2

TS83C51RB2/RC2/RD2

TS87C51RB2/RC2/RD2

High Performance 8-bit Microcontrollers

1. Description

Atmel Wireless & Microcontrollers TS80C51Rx2 is high

performance CMOS ROM, OTP, EPROM and ROMless

versions of the 80C51 CMOS single chip 8-bit

microcontroller.

The TS80C51Rx2 retains all features of the 80C51 with

extended ROM/EPROM capacity (16/32/64 Kbytes), 256

bytes of internal RAM, a 7-source , 4-level interrupt

system, an on-chip oscilator and three timer/counters.

In addition, the TS80C51Rx2 has a Programmable

Counter Array, an XRAM of 256 or 768 bytes, a

Hardware Watchdog Timer, a more versatile serial

channel that facilitates multiprocessor communication

(EUART) and a X2 speed improvement mechanism.

The fully static design of the TS80C51Rx2 allows to

reduce system power consumption by bringing the clock

frequency down to any value, even DC, without loss of

data.

The TS80C51Rx2 has 2 software-selectable modes of

reduced activity for further reduction in power

consumption. In the idle mode the CPU is frozen while

the timers, the serial port and the interrupt system are still

operating. In the power-down mode the RAM is saved

and all other functions are inoperative.

2. Features

•

80C52 Compatible

•

8051 pin and instruction compatible

•

Four 8-bit I/O ports

•

Three 16-bit timer/counters

•

256 bytes scratchpad RAM

•

High-Speed Architecture

•

40 MHz @ 5V, 30MHz @ 3V

•

X2 Speed Improvement capability (6 clocks/

machine cycle)

30 MHz @ 5V, 20 MHz @ 3V (Equivalent to

60 MHz @ 5V, 40 MHz @ 3V)

•

Dual Data Pointer

•

Hardware Watchdog Timer (One-time enabled with

Reset-Out)

•

2 extra 8-bit I/O ports available on RD2 with high

pin count packages

•

Asynchronous port reset

•

Interrupt Structure with

•

7 Interrupt sources,

•

4 level priority interrupt system

•

Full duplex Enhanced UART

•

Framing error detection

•

Automatic address recognition

•

Low EMI (inhibit ALE)

•

On-chip ROM/EPROM (16K-bytes, 32K-bytes, 64K-

bytes)

•

Power Control modes

•

Idle mode

•

Power-down mode

•

Power-off Flag

•

Once mode (On-chip Emulation)

•

On-chip eXpanded RAM (XRAM) (256 or 768 bytes)

•

Programmable Clock Out and Up/Down Timer/

Counter 2

•

Programmable Counter Array with

•

High Speed Output,

Compare / Capture,

Pulse Width Modulator,

Watchdog Timer Capabilities

•

Power supply: 4.5-5V, 2.7-5.5V

•

Temperature ranges: Commercial (0 to 70

C) and

Industrial (-40 to 85

•

Packages: PDIL40, PLCC44, VQFP44 1.4, CQPJ44

(window), CDIL40 (window), PLCC68, VQFP64

1.4, JLCC68 (window)

Rev. C - 06 March, 2001

Recommended Resources

Using AD7008 to construct a programmable sine wave signal generator: [i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:00[/i] In many electronic systems, a sine wave signal with adjustable frequency and amplitude is often needed as a reference or carrier...; feifei Mobile and portable

2553 hardware I2C reading and writing 24C32 problem: I refer to the example of a hero in this forum. He used CCSv5 to do it. I used IAR and basically did not make any changes. But when I simulated, I found that it was stuck at the following sentence: __...; chenbingjy Microcontroller MCU

AN 581: High Definition (HD) Video Reference Design (V2): Introduction The Altera V-Series of reference designs deliver high-quality up, down, and cross conversion of standard definition (SD), high definition (HD) and 3 gigabits per second (Gbps) video strea...; xiaoxin1 FPGA/CPLD

How to select a chip for a power supply with an input of 30-100VDC and a fixed output of DC24V: I want to make a power supply with an input of 30-100VDC and a fixed output of DC24V, with a maximum power of about 10W. What chip should I choose? eeworldpostqq...; 杨柳青年 Power technology

When making image, NK.nb0, NK.nb1, ........NK.nb14 were generated.: #define NKNAME NK ; NK Start address #define NKSTART 8C100000 #define NKLEN 01d0000 #define RAMSTART 8dd00000 #define RAMLEN 02200000 $(NKNAME) $(NKSTART) $(NKLEN) RAMIMAGE RAM $(RAMSTART) $(RAMLEN) R...; weixichao Embedded System

Signal linear transformation problem: [i=s]This post was last edited by Yanyuan Technology House on 2019-6-13 08:56[/i]Normally, the linear amplification of a small DC signal into a large signal can be achieved only through an amplifier c...; 燕园技术宅 Analog electronics

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components