Resistance to sulphur-bearing gas (AS version only): ASTM-B-809
ΔR%
ΔR%
ΔR%
ΔR%
ΔR%
1
1
1
0.25
0.25
0.25
500
ΔR%
ΔR%
Maximum
1
0.1
Zero at 155°C
0.1
0.2
0.25
0.05
0.05
0.05
Typical
0.25
0.02
Pulse Withstanding
Voltage proof
Pulse Withstanding
Volts
Chip Resistors
Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
Chip Resistors
Pulse Performance Data
Data
Pulse Performance Data
Pulse Performance
Lightning Surge
1.2/50 µS Lightning Surge
10000
10000
Lighting Surge
is a shift in resistance of less than 1% from the initial value.
lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
Resistors are tested in accordance with IEC 60 115-1 using both 1.2/50ms and 10/700ms pulse shapes. The limit of acceptance
acceptance is a shift in resistance of less than 1% from the initial value.
is a shift in resistance of less than 1% from the initial value.
1.2/50 µS Lightning Surge
2512
2512
2010
1206
2010
0805
1206
0805
Lighting
Performance Data
Pulse
Surge
in accordance with IEC 60 115-1 using both 1.2/50ms and 10/700ms pulse shapes. The limit of acceptance
Resistors are tested
Peak voltage (volts)(volts)
Peak voltage
1000
1000
100
100
Lightning Surge
10
lightning surge resistors are tested in
1
10
10
accordance with IEC 60 115-1 using
1
10
both 1.2/50µs and 10/700µs pulse shapes.
10 pulses are applied. The limit of
acceptance is a shift in resistance of less
than 1% from the initial value.
10000
10000
100
100
1000
10000
100000
100000
1000000
1000000
10000000
10000000
Resistance (ohms)
1000
10000
Resistance (ohms)
10/700 µS Lightning Surge
10/700 µS Lightning Surge
2512
2512
2010
Peak Voltage (volts)(volts)
Peak Voltage
1000
1000
2010
1206
0805
1206
0805
100
100
10
1
10
1
10
100
10
100
1000
10000
100000
100000
1000000
1000000
10000000
10000000
Resistance (ohms)
1000
10000
Resistance (ohms)
General Note
Advanced Film Division
• 4222 South Staples
TT Electronics reserves the right to make changes in product
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
Performance Data
Single Pulse
1000
e Performance Data
pulse:
e impulse graph is
of 50 impulses of
ar shape applied at
e intervals. The
ceptance was a
istance of less
rom the initial
power applied
ct to the
s of the maximum
mpulse:
e
impulse graph
gle
impulse voltage
is
wn.
50 impulses of
lt of
Pulse Power (watts)
se Withstanding
p Resistors
100
10
Single Pulse
1000
2512
2010
1206
0805
1
0.0001
0.001
0.01
Pulse duration (seconds)
0.1
1
Pulse Power (watts)
100
ular shape applied at
ute intervals. The
Continuous Pulses
acceptance was a
100
esistance of
Continuous Load Due to Repetitive Pulses
less
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
% from the initial
10
2512
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
he power applied
2010
ject to the
initial value
1206
10
ons of the maximum
ible impulse voltage
1
2512
0805
0.0001
0.001
0.01
0.1
1
hown.
due to
us load
Pulse Power (watts)
pulses:
nuous load graph
ned by applying
rectangular pulses
pulse period was
so that the
ower dissipated
stor was equal
d power at 70°C.
limit of acceptance
uous load due to
t in resistance of
ve pulses:
1% from the initial
tinuous load graph
ained by applying
e rectangular pulses
he pulse period was
d so that the
power dissipated
sistor was equal
ed power at 70°C.
he limit of acceptance
hift in resistance of
n 1% from the initial
Pulse duration (seconds)
2010
1
Continuous Pulses
100
1206
0805
0.1
0.0001
0.001
0.01
Pulse Duration (seconds)
0.1
1
Pulse Power (watts)
10
Pulse Voltage
2512
2010
1206
0805
2512
2010
1206
0805
10000
1
Pulse Voltage (Volts)
1000
0.1
0.0001
0.001
0.01
Pulse Duration (seconds)
0.1
1
100
Pulse Voltage
10000
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
Pulse Duration (seconds)
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
I just searched the forum, but couldn't find the agreement. Isn't there a third-party ISP software on the Internet? Then this agreement should be public, right? I want to make a dedicated download mac...
I made two cyclone4 EP4CE6E22C8 boards, and after soldering them, I found that other functions were fine, but the PLL output frequency was wrong.
50M crystal input, 5M, 50M, 100M, 200M output. The mea...
In the BSP of 270 under WINCE42, there is a piece of code. I don’t know what it means. Could any experts help me analyze it? LPDWORD lpdwToc; [b]lpdwToc [/b]= (LPDWORD)(*(DWORD*)(RAM_IMAGE_START + 68)...
This is my first time using the mbed platform. The function integration is very high, and I don’t understand many things. I downloaded 3 examples and took a look at them. I roughly looked at the basic...
Recently, I have a project that needs to use virtual mouse and keyboard drivers, but I don't know how to install the drivers into the system. There is no header sequence, and the project is very urgen...
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
The data collector of the automatic weather station is generally designed based on a single-chip microcomputer or a PC/104 bus controller. It has the characteristics of good compatibility with PC, low...[Details]
We know that microcontroller development tools generally include real-time online emulators and programmers. Among them, online emulators are very good tools, but they are also more expensive...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
The above is to use MB1404 as a stereo composite signal transmitter. You can use the internal high-frequency amplifier and oscillator or not! According to my experience, I still recommend beginners...[Details]
0 Introduction
In order to improve the automation control of shortwave transmitters, so that they can automatically process from far to near, the technicians here use the ICS system to complete the ...[Details]
The invention of the steam engine ushered in the first conversion of internal energy and mechanical energy for mankind, and the birth of the internal combustion engine at the end of the 19th centur...[Details]
Cars equipped with xenon headlights are already common on the road. Whether they are standard equipment on high-end cars or embellishments on modified cars, xenon lamps are gradually becoming a sym...[Details]
1 Load Regulation
Changes in power supply load will cause changes in power supply output. When the load increases, the output decreases, and vice versa, when the load decreases, the output inc...[Details]
At present, with the diversification of portable products and the almost harsh requirements for audio and video parts, the power consumption requirements of the whole machine have been raised to a ...[Details]
Currently, high-frequency and high-efficiency DCDC converters are increasingly used in automotive electronic systems.
High switching frequency can use smaller power inductors and output filter...[Details]
It should be understood as follows: DC-DC means direct current to direct current (conversion of different DC power values). Anything that meets this definition can be called a DC-DC converter, incl...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
