Double-aperture cores
B62152
Ferrites and accessories
Double-aperture cores
Series/Type:
Date:
B62152
June 2013
Data Sheet
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Double aperture cores
Primarily used for broadband transformers up to high
frequencies
Application examples
■
SIFERRIT material N30 for low frequencies and for pulse
applications
■
SIFERRIT material K1 for matching transformers and
baluns up to about 250 MHz in antenna feeders or in
input circuits of VHF and TV receivers
Dimensions
1)
Magnetic characteristics
Weight
1
) Cores made of NiZn ferrite may exceed the specified dimensions by up to 5%.
Double-aperture cores
B62152
h
(mm)
b
(mm)
a
(mm)
c
(mm)
d
(mm)
l/A
1)
l
e
2)
mm
–1
mm
15.3
15.3
7.6
3.7
3.7
3.7
A
e
2)
mm
2
49.7
28.4
10.2
2.1
1.7
1.2
V
e
2)
mm
2
760
435
78
g
4.0
2.5
0.4
14.5 – 1.0 14.50 – 1.0 8.5 – 0.5 5.85 0.25 3.4 + 0.60 0.31
8.3 – 0.6 14.50 – 1.0 8.5 – 0.5 5.85 0.25 3.4 + 0.60 0.54
6.2 – 0.5
2.5 – 0.2
2.0 – 0.2
1.4 – 0.2
7.25 – 0.5 4.2 – 0.4 2.90 0.15 1.7 + 0.30 0.75
3.60 – 0.3 2.1 – 0.3 1.45 0.10 0.8 + 0.15 1.78
3.60 – 0.3 2.1 – 0.3 1.45 0.10 0.8 + 0.15 2.20
3.60 – 0.3 2.1 – 0.3 1.45 0.10 0.8 + 0.15 3.22
7.8 0.1
6.3 0.1
4.5 0.05
Dimensions with parylene coating
3)
Core
Max. coated h
(mm)
DL 14.5/14.5 /8.5
14.55
DL 8.3/14.5 /8.5
DL 6.2/ 7.25/4.2
DL 2.5/ 3.6 /2.1
DL 2.0/ 3.6 /2.1
DL 1.4/ 3.6 /2.1
Core height h
(mm)
14.5 –1.0
8.3 –0.6
6.2 –0.5
8.35
6.25
2.55
2.05
1.45
Material
K1
K1
N30
K1
N30
Max. coated b
(mm)
14.55
14.55
7.30
3.65
3.65
3.65
Max. coated a
(mm)
8.55
8.55
4.25
2.15
2.15
2.15
Min. coated d
(mm)
3.35
3.35
1.65
0.75
0.75
0.75
Overview of available types
A
L
value
3)
nH
(Tol. 30%)
330
190
10000
140
7300
Ordering code
4)
B62152A0001X001
B62152A0004X001
B62152A0004X030
B62152A0007X001
B62152A0007X030
1
) Magnetic characteristics and A
L
value are based on winding of center leg.
2
) Double-aperture cores are available with parylene coating on request. Ordering code for coated version: B62152P…
Please read
Cautions and warnings
and
Important notes
at the end of this document.
3
4
) Magnetic characteristics and A
L
value are based on winding of center leg.
) Double-aperture cores are available with parylene coating on request.
Ordering code for coated version: B62152P…
Please read
Cautions and warnings
and
Important notes
at the end of this document.
06/13
2
Ferrites and accessories
Cautions and warnings
Cautions and warnings
Mechanical stress and mounting
Ferrite cores have to meet mechanical requirements during assembling and for a growing number
of applications. Since ferrites are ceramic materials one has to be aware of the special behavior
under mechanical load.
As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing
or tensile load. Especially high cooling rates under ultrasonic cleaning and high static or cyclic
loads can cause cracks or failure of the ferrite cores.
For detailed information see chapter
“Definitions”,
section 8.1.
Effects of core combination on A
L
value
Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent
that the initial permeability is dependent on the stress state of the core. The higher the stresses
are in the core, the lower is the value for the initial permeability. Thus the embedding medium
should have the greatest possible elasticity.
For detailed information see chapter
“Definitions”,
section 8.2.
Heating up
Ferrites can run hot during operation at higher flux densities and higher frequencies.
NiZn-materials
The magnetic properties of NiZn-materials can change irreversible in high magnetic fields.
Processing notes
– The start of the winding process should be soft. Else the flanges may be destroid.
– To strong winding forces may blast the flanges or squeeze the tube that the cores can no more
be mount.
– To long soldering time at high temperature (>300 °C) may effect coplanarity or pin arrangement.
– Not following the processing notes for soldering of the J-leg terminals may cause solderability
problems at the transformer because of pollution with Sn oxyd of the tin bath or burned
insulation of the wire. For detailed information see chapter
“Processing notes”,
section 8.2.
– The dimensions of the hole arrangement have fixed values and should be understood asa
recommendation for drilling the printed circuit board. For dimensioning the pins, the group of
holes can only be seen under certain conditions, as they fit into the given hole arrangement.
To avoid problems when mounting the transformer, the manufacturing tolerances for
positioning the customers’ drilling process must be considered by increasing the hole diameter.
06/13
4
京公网安备 11010802033920号
EEWORLD
