FEATURES / BENEFITS
p
Ultra slim design, less than 1/2” (13mm) high
p
70% lumen maintenance @ 50,000+ hr life @ 25ºC
ambient temperature
p
Low energy use, no IR or UV emissions
p
Modular “quick connect” system for easy installation
p
Designed for even LED spacing over linear runs, no
hotspots or dark spots between fixtures
p
Cool to touch, suitable for direct mounting on flammable
surfaces
p
Onboard constant current driver with low voltage input
Frosted Lens Version
CL2 SERIES
p
ETL listed to UL standards for dry locations
p
Utilizes the latest high efficiency LED technology
APPLICATIONS
The CL2 Series is designed for use in a wide range of lighting applications, especially areas which benefit from its ultra slim
profile, low energy and long operating life. Designed around the latest LED technology, the CL2 series represents true
innovation in lighting, delivered in a package which blends seamlessly into it’s surroundings. Sample applications include, but not
limited to: Cove and cornice lighting, shelf lighting, integrated into furniture, under counters, stair hand rails, display cases, task lighting.
OPERATING CONDITIONS
p
Ambient temperature
-20ºC to +40ºC (-4ºF to +104ºF)
MATERIALS/FINISH
p
Anodized aluminum module base with polycarbonate lens
p
Plug & play connector system
p
Onboard constant current driver
p
4 high output 1W LEDs per module
p
20AWG, PTFE cable - UL rated E213967, 300V, 80ºC
p
Input voltage 24VDC. Use only class 2 power supplies
p
Power consumption 5.3W per module
Does not include power supply losses
p
Max # of modules connected per run = 20. Up to 16
modules can be operated on a 100W power supply
ORDERING INFORMATION
Catalog
Number
(A)
C
N
W
Z
Typical
CCT
5000K
4100K
3000K
3000K
Min Luminous Typical Luminous
Flux per Module Flux per Module
(lumens)
(lumens)
288
242
204
171
342
288
242
204
Lens
(B)
C
= Clear
F
= Frosted
LED Color
Cool White
Neutral White
Warm White
High CRI Warm White
CRI
75
75
75
92
Note: Special colors available, consult factory.
LED data is LED manufacturers test data at 25
º
C Tj. Light output at max acceptable ambient temp will be approximately
15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by
additonal 8-10%, and frosted lens by additional 30%.
Connectors
CL2-E2E
= End to end module connector
CL2-FLEX
= 63mm / 2.5” flexible end to end connector
CL2-EXTEND
= 952mm / 37.5” flexible end to end connector
(sold separately)
CL2-START
= 3m / 9’ 10” start cable (supplies power to first module)
CL2-END
= End plug
Dialight Lumidrives
York House • Weatherby Road • Long Marston, York, YO26 7NH
Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com
PRIVATE LABEL
OEM PROGRAM
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
MDEXLUMCL2_A
MECHANICAL DIMENSIONS
Dimensions in inches (mm)
Requires Class 2 low voltage power supply (purchased separately)
Total power consumption of modules should not exceed rating of power supply
Observe minimum rating of power supply used
PHOTOMETRIC DATA
CL2 Module with Clear Lens
(Normalized Data)
2 CL2 modules with start cable, end to end connector, and end plug
2 CL2 modules with start cable, flex connector, and end plug
IES 32 files available - consult factory
Dialight reserves the right to
make changes at any time
in order to supply the best
product possible.
Dialight Lumidrives
York House • Weatherby Road • Long Marston, York, YO26 7NH
Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com
PRIVATE LABEL
OEM PROGRAM
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
MDEXLUMCL2_A
京公网安备 11010802033920号
EEWORLD
