BU-64703F8-492S datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-64703F8-492S

BU-64703F8-492S: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.88 X 0.88 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80; CategoryThe embedded processor and controller Microcontrollers and processors; File Size1MB，50 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-64703F8-492S Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.88 X 0.88 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80

BU-64703F8-492S Parametric

Parameter Name	Attribute value
Maker	Data Device Corporation
package instruction	QFF,
Reach Compliance Code	compli
Other features	ALSO OPERATES AT 3.3V LOGIC POWER
boundary scan	NO
letter of agreement	MIL-STD-1553A; MIL-STD-1553B; MIL-STD-1760; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	S-CQFP-F80
JESD-609 code	e0
length	22.352 mm
low power mode	YES
Number of serial I/Os	2
Number of terminals	80
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFF
Package shape	SQUARE
Package form	FLATPACK
Maximum seat height	3.302 mm
Maximum supply voltage	3.46 V
Minimum supply voltage	3.14 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	MILITARY
Terminal surface	TIN LEAD
Terminal form	FLAT
Terminal pitch	1.016 mm
Terminal location	QUAD
width	22.352 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

BU-64703

Make sure the next

Card you purchase

has...

SIMPLE SYSTEM RT MARK3

(SSRT MARK3)

FEATURES

•

Complete Integrated Remote Terminal

Including:

•Dual Low-Power 3.3V or 5.0V

Transceivers

•Complete RT Protocol Logic

•

Supports MIL-STD-1553A/B Notice 2,

STANAG-3838 RT, and

MIL-STD-1760 Stores Management

•

World’s Smallest CQFP SSRT

•

80-Pin Ceramic Flat Pack or Gull Wing

Package

DESCRIPTION

The BU-64703 Simple System RT Mark3 (SSRT Mark3) MIL-

STD-1553 terminal provides a complete interface between a simple

system and a MIL-STD-1553 bus. The SSRT Mark3 can be powered

entirely by 3.3 volts, thus eliminating the need for a 5V power supply.

This terminal integrates dual transceiver, protocol logic, and a FIFO

memory for received messages in an extremely small, 0.88 inch

square 0.130” max height ceramic package. The gull wing package

with a “toe-to-toe” maximum dimension of 1.110 inches enables its

use in applications where PC board space is at a premium. The

SSRT Mark3 provides multi-protocol support of MIL-STD-1553A/B,

MIL-STD-1760, McAir, and STANAG-3838.

The SSRT Mark3's transceivers are completely monolithic, require

only a +3.3V supply (+5.0V available), and consume low power. The

internal architecture is identical to that of the original BU-61703/61705

Simple System RT (SSRT). There are versions of the Simple System

RT Mark3 available with transceivers trimmed for MIL-STD-1760

compliance, or compatible to McAir standards. The SSRT Mark3 can

operate with a choice of clock frequencies at 10, 12, 16, or 20 MHz.

The SSRT Mark3 incorporates a Built-In-Test (BIT). This BIT, which is

processed following power turn-on or after receipt of an Initiate Self-

Test Mode command, provides a comprehensive test of the SSRT

Mark3's encoders, decoders, protocol, transmitter watchdog timer,

and protocol section. The SSRT Mark3 also includes an auto-config-

uration feature.

The SSRT Mark3 is ideal for stores and other simple systems that do

not require a microprocessor. To streamline the interface to simple

systems, the SSRT Mark3 includes an internal 32-word FIFO for

received data words. This serves to ensure that only complete, con-

sistent blocks of validated data words are transferred to a system.

•

3.3V Logic Power

•

Meets 1553A/McAir Response Time

Requirements

•

Internal FIFO for Burst Mode Capability on

Receive Data

•

16-bit DMA Interface

•

Auto Configuration Capability

•

Comprehensive Built-In Self-Test

•

Direct Interface to Simple (Processorless)

Systems

•

Available with Full Military Temperature

Range and Screening

•

Selectable Input Clock:

10, 12, 16, or 20 MHz

FOR MORE INFORMATION CONTACT:

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

2003 Data Device Corporation

Recommended Resources

DC voltage converter circuit schematic diagram

Class A power amplifier circuit

Four-channel remote control circuit composed of ZHF-9901 and ZHJ-9902

Three-terminal voltage stabilizing integrated circuit working performance test circuit

Can STM32 display the analog signal from DAC8032?: Using STM32 to make an oscilloscope, using the high-speed ADC of STM32 to collect signals, can I directly use TFT to display them on the microcontroller? Can STM32 directly receive analog sine waves a...; wy_prayer stm32/stm8

How DIY mobile phones were born: The DIY mobile phone activity has come to an end. In order to let everyone understand the whole DIY process more clearly, here are some completed posts to show you :)[/size][/font][font=微软雅黑][size=3] ...; eric_wang DIY/Open Source Hardware

Capacitor selection and installation considerations: When confirming the use and installation environment, capacitors used within the rated performance range specified in the product sample design manual should avoid use in the following situations:　　a....; Aguilera Analogue and Mixed Signal

redboot load hello.bin produces a bunch of garbled characters: Hey guys, I loaded a hello.c file from the example in the redboot[romram] version, and then compiled it with xscale-elf-gcc to get a.out, and then used xscale-elf-objcopy to make a.out into hello.bin....; abin1982 Embedded System

【Help】MS430f449 interrupt service routine: I would like to ask: In the C language programming of MSP430, how to call the interrupt service program? What form is used?In the example in the accompanying book: #pragma vector = WDT_VECTOR_interupt...; wanxd Microcontroller MCU

Huawei releases lighting IoT solution that can save 80% of urban lighting electricity consumption: [p=28, 2, left][color=rgb(51, 51, 51)][font=frutigernext,]On March 15, 2016, Huawei released the industry's first multi-level intelligent control lighting IoT solution at CeBIT 2016 (Hannover Consumer...; fish001 Energy Infrastructure?

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components