EEWORLDEEWORLDEEWORLD

Part Number

Search

ATT-0314-09-BNC-10

Description
Fixed Attenuator, 0MHz Min, 18000MHz Max, STAINLESS STEEL
CategoryWireless rf/communication    Radio frequency and microwave   
File Size272KB,10 Pages
ManufacturerMidwest Microwave
Download Datasheet Parametric View All

ATT-0314-09-BNC-10 Overview

Fixed Attenuator, 0MHz Min, 18000MHz Max, STAINLESS STEEL

ATT-0314-09-BNC-10 Parametric

Parameter NameAttribute value
MakerMidwest Microwave
Reach Compliance Codeunknow
Other featuresI/P POWER-MAX(PEAK)=200W
Nominal attenuation9 dB
Characteristic impedance50 Ω
structureCOAXIAL
Maximum input power (CW)33.01 dBm
Maximum operating frequency18000 MHz
Minimum operating frequency
Maximum operating temperature125 °C
Minimum operating temperature-54 °C
RF/Microwave Device TypesFIXED ATTENUATOR
Maximum voltage standing wave ratio1.5
Attenuators
Flange Mounted - Integrated Design
•
•
•
•
DC - 18 GHz Performance
Tab, Slot, or Rod Contact for Microstrip use
Interchangeable Transition Contact Pins
Reduces Package Size and Weight
SMA Connector - Attenuators
This series of SMA flange mounted Connector-Attenuators are ideally
suited for use on microstrip packages where size and weight are a
consideration. By combining the Attenuator and the launching Connec-
tor, space and weight as well as cost savings is accomplished. The
resistive film circuit is designed to improve reliability and lower mismatch
losses by eliminating the need for separate coaxial components. The
units exhibit low VSWR and are ruggedly constructed of stainless steel
and are temperature stabilized for use in hostile environments.
Model No.
ATT-0300--XX-SMA-02
Figure 1 - non- removeable tab contact
Attenuation
01 - 06
07 - 10
11 - 20
01 - 06
07 - 10
11 - 20
21 - 30
01 - 06
07 - 10
11 - 20
21 - 30
01 - 06
07 - 10
11 - 20
21 - 30
01 - 06
07 - 10
11 - 20
21 - 30
+
+
+
+
+
+
+
0.30
0.50
0.75
0.30 *
0.50
0.75
1.00
VSWR
1.20 @ DC - 4 GHz
1.35 @ 4 - 12.4 GHz
1.50@12.4 -18 GHz
1.15 @ DC - 4 GHz
1.25 @ 4-12.4 GHz
1.50 @12.4 -18 GHz
1.15 @ DC - 4 GHz
1.25 @ 4-12.4 GHz
1.50 @12.4 -18 GHz
Fig.
1
Figure 2
ATT-0310--XX-SMA-02
2
ATT-0311-XX-SMA-02
+ 0.30 *
+ 0.50
+ 0.75
+ 1.00
+
+
+
+
3
ATT-0312-XX-SMA-02
0.30 * 1.15 @ DC - 4 GHz
0.50
1.25 @ 4-12.4 GHz
0.75
1.50 @ 12.4 - 18 GHz
1.00
4
Figure 3
ATT-0314-XX-SMA-02
+ 0.30 * 1.15 @ DC - 4 GHz
+ 0.50 1.25 @ 4-12.4 GHz
+ 0.75
1.50 @12.4 -18 GHz
+ 1.00
5
Note: When ordering, replace "XX" in Model No. with desired Attenuation Value.
Interchangeable center pin must be ordered separately, see Part No's below.
* From 12.4 to 18 GHz, Attenuation accuracy is + 0.40 dB
Interchangeable Pin Configurations
"CC"
-01
-02
-03
-04
D IM " C "
+ .002
0.012
0.018
0.028
0.036
Figure 4
Part No.
PPM-0020-CC-YYY-01
Part No.
PPM-0030-05-YYY-01
Part No.
PPM-0040-06-YYY-01
Notes:
1. Select desired length of interchangeable center pins in accordance with package
requirements and substitue the three digit decimal length for "YYY" in the Part No.
2. All Attenuator Models are rated at 2 Watts Average and 200 Watts Peak.
3. Finish : Housings are Passivated Stainless Steel, Center Pins are gold plated.
Figure 5
dB
1-12
13-30
D IM A
.615 (15.6)
.765 (19.4)
D IM B
.375 (9.5)
.525 (13.3)
19
Finally got the development board for trial use and got familiar with it (1)
I was very excited when I got the board at school at noon. I studied the board and found that the OLED uses a voltage of 15V; there is an LC4032V programmable controller produced by Lattice on the boa...
ssawee Microcontroller MCU
Helper2416 RAW-OS GUI Testing
First of all, I would like to thank Junyixin for providing a learning platform. I went to the official website and took a look. It is really a good company. I will post some pictures later and everyon...
lyzhangxiang Embedded System
Buy three Atmel SAM R21 and build your own network
As the title says, I bought three Atmel SAM R21s to network them myself. If anyone has second-hand modules, I would appreciate your help. Please contact 18502187651...
ppgetyou Microchip MCU
In addition to using WinIo.vxd driver, are there any other drivers that can simulate mouse and keyboard actions?
My WinIo.vxd driver has been successful, but the limitation is too big. The USB interface mouse and keyboard cannot be used!!! In addition to the WinIo.vxd driver, is there any other universal driver ...
cnic Embedded System
Measurement issues of resistance, capacitance, inductance and voltage in high frequency circuits
In a high-frequency circuit, such as a 3.9M crystal oscillator, how do you measure the voltage across the resistor, capacitor, and inductor? Can you measure it with a normal digital multimeter? If so,...
michael_tju Embedded System
[Vote] 2010 Forum Member Finals! (EEWORLD Community)
The development of the forum depends on everyone! It has been a year. I would like to thank all the netizens who have built the forum brick by brick. I hope everyone will continue to support our big f...
EEWORLD社区 Talking

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1018  1852  1380  1370  1944  21  38  28  40  57 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号