19013 36th Ave. West
Suite H
Lynnwood, WA 98036, USA
SM55, SM45, SM40 Crystal
HC-49/US Low Profile Crystal Mounted on a Surface Mount Platform
Available in 3 heights, SM55: 5.5mm, SM45: 4.5mm, SM40: 4.0mm
Solder Pad Compatible with our SM39S and SMD Crystals from Epson, Meiden & Citizen
Available in Standard 4 pad or Optional 2 pad Pinout Style
Standard Specifications
± 30 PPM is standard, tighter tolerances available
Calibration Frequency Tolerance at 25
°
C
Operating Temperature Range (OTR)
0 to +70°C is standard, but can be extended to -40 to +85°C
Frequency Stability (FS) over OTR
± 50 PPM is standard, tighter tolerances available
Drive Level
50
mW
is standard, customer may specify
Aging at 25°C
± 5 PPM per year is standard, customer may specify ± 1 PPM
Shunt Capacitance
7 pF maximum
Pullability
May be specified by customer in terms of frequency shift required over a certain range of load capacitance
(e.g. +100 PPM from CL=12 to CL=18 pF) or as motional capacitance ( fF )
Part Numbering Guide
SM45 E -- xx -- 70.0M
3.200 MHz
–
70.000 MHz
ESR Values
Oscillation
Mode
Frequency Range
(MHz)
Maximum
ESR (Ohms)
Model
(Height/Pinout)
SM55: 5.5mm/Std
SM45: 4.5mm/Std
SM40: 4.0mm/Std
SMP55: 5.5mm/2 pad
SMP45: 4.5mm/2 pad
SMP40: 4.0mm/2 pad
Frequency in MHz
Load Capacitance
Parallel Resonance in pF (
³
10
pF)
SR = Series Resonance
Temperature Range
Blank: 0 to +70
°
C
E: - 40 to +85
°
C
Fundamental
AT Cut
3.200
5.000
8.000
12.000
–
–
–
–
4.999
7.999
11.999
30.000
300
120
70
50
100
3rd Overtone
AT Cut
25.000 – 70.000
Consult factory for available frequencies and specs.
Not all options available for all frequencies. A special part number may be assigned.
Consult factory for lower ESR
Mechanical: inches (mm)
not to scale
Solder Pads
Standard Pinout (SM)
.09 (2.4)
.06 (1.6)
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
.516 (13.1) MAX
Packaging
24mm tape
12mm pitch
.197 (5.0) MAX
.256 (6.5)
SM55: .217 (5.5) MAX
SM45: .177 (4.5) MAX
SM40: .157 (4.0) MAX
.055 (1.4)
.370 (9.4)
.06 (1.6)
CASE GND
CASE GND
.256 (6.5)
.09 (2.2)
.14 (3.6)
May 2002
.09 (2.2)
.14 (3.6)
Optional 2 Pad Pinout (SMP)
.09 (2.4)
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
37