M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 4-pin,
A-coded, translucent body, 230 V AC/DC, 4 A; PUR black cable, 4-wires, 0.34
mm²
Product Description
M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 4-pin, A-coded, translucent body, 230 V AC/DC, 4 A; PUR black cable, 4-wires, 0.34 mm²
Technical Drawing
Technical Specifications
Face View
Pin 1 Pin 2 Pin 3 Pin 4
brown white blue
black
Technical Data
Product Family:
Product Sub Family:
Brand:
Connector Type:
Type of Contact / Gender:
Connector Design:
Number of Pins:
Coding:
Shielding:
Attachment Type:
Rated Voltage:
Rated Voltage (UL):
Rated Impulse Voltage:
Operating Voltage:
Rated Current*:
Rated Current (UL)*:
Sensor / Actuator Connectors
M12 Standard
Lumberg Automation
Cordset, single ended
Male
Straight
4
A
Unshielded
Coupling Screw
250 V
250 V AC
2.5 kV
230 V AC/DC
4A
4A
Contact Resistance:
Insulation Resistance:
Mating Cycles:
Ambient Temperature (Operation)*:
Operating Temperature (UL):
Protection Degree / IP Rating**:
Design Standard:
Pollution Degree:
Overvoltage Category:
≤ 10 mOhm
˃ 10^9 Ohm
≤ 100
- 40 °C - + 90 °C
max. + 50 °C
IP65, IP67, IP68 (1 m / 24 h), IP69K
IEC 61076-2-101
3 acc. to DIN EN 60664-1 (VDE 0110-1)
II acc. to DIN EN 60664-1 (VDE 0110-1)
Materials
Contact Base Material:
Contact Plating:
Contact Bearer Material:
Contact Bearer Color:
Flammability Class (Contact Bearer):
Molded Body Material:
Molded Body Color:
Flammability Class (Molded Body):
Attachment Material:
Attachment Plating:
CuSn
Cu/Au
TPU
Orange
UL 94 HB
TPU
Translucent
UL 94 HB
CuZn
Nickel-plated
Additional Technical Data
Fastening Torque (Attachment):
M 12x1: (50-60) Ncm, hand-tight
Cable Data
Cable Number:
Conductor Size:
Number of Wires:
Minimal Bending Radius (Fixed Inst):
Minimal Bending Radius (Flexible Inst):
Cycles (Bending):
Cycles (Torsion):
Conductor material:
Cable Jacket Material:
Cable Jacket Color:
Cable Diameter D:
Wire Insulation Material:
Insulated Wire Diameter:
Ambient Temperature (Fixed
Installation):
225
0.34 mm²
4
˃5xD
˃ 10 x D
˃5M
˃ 5 M @ ± 360 °/1 m
Cu
PUR
black matt similarly RAL 9005
ø 4.70 ± 0.15 mm
PP
ø 1.30 ± 0.10 mm
- 50 °C - + 90 °C (UL: + 80 °C)
Ambient Temperature (Flex Installation): - 25 °C - + 90 °C (UL: + 80 °C)
Ambient Temperature (Drag Chain Inst): - 25 °C - + 60 °C
UL Cable Type:
Flammability Class (Cable Jacket):
Cable Characteristics:
AWM: 20549
DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2
Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibilty; Free of lacquer wetting disturbing
substances
Approvals
UL-File:
UL:
E315587
UL 2238; cURus
Safety & Environmental Compliance
RoHS Compliant:
yes
Resistances
Halogenfree:
DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Notes
Note Derating:
Protection Degree / IP Rating Note:
Note:
Variants
Item #
63650
44079
44966
98377
11809
Notice derating
** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without
notice, and the listing of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages
(including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief
at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product
Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and
regulations based on their individual usage of the product.
《Friends who don’t need it or already have it can skip it. File format: PDF》 "I will post them in this order" 1 IGBT drive circuit 3 pages 2 IGBT drive and protection 9 pages 3 Detailed design of IGBT...
The problem of STM32 ADC being prone to channel misalignment in sequential scan DMA transfer mode has been around for a long time. In the product I made, this mode was used because 7 channels were use...
The method of identifying the three poles of the thyristor is very simple. According to the principle of PN junction, just use a multimeter to measure the resistance value between the three poles......
1 Introduction Traditional testing instruments are mostly completed by hardware circuits, which not only have single functions, but also have long development cycles and are difficult to maintain. Wit...
PCF8576 is a character LCD driver/controller with I2C bus interface. It has 4 backplane outputs and 40 display segment outputs, so it can drive up to 160 LCD display segments. PCF8576 can be cascaded ...
[size=4] [b]Dimming is a very common function in lighting systems. For incandescent lamps, it can be easily achieved at a low cost. Dimming of LED lamps is somewhat difficult, but for architects and r...
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
China's new energy vehicles are in a transition period from research and development to real industrial development. In 2012, with the intensive launch of new energy vehicle policy planning, the de...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
A standard cell
is an electrochemical
cell
used as a voltage reference standard in many electrical standards laboratories
. If properly maintained, standard cells are very stable. The ...[Details]
12v Lead Acid batteries used in trucks, cars, RVs and uninterruptible power supplies are usually rated at 12V. This circuit monitors the battery, the charge and discharge curves, gives the cu...[Details]
LED lighting: Basic circuit design can be completed in as little as one day
Semiconductor manufacturers are also getting involved in the LED lighting business. The power circuit of LED req...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
Since the late 1990s, with the demand for higher system efficiency and lower power consumption, the technological update of telecommunications and data communication equipment has promoted the deve...[Details]
The ARINC429 bus is one of the most commonly used communication buses between various subsystems of avionics. As the "skeleton" of modern avionics systems, once the bus system or the attached airbo...[Details]
introduction
Steam turbines are driven by high-temperature and high-pressure steam generated by boilers to run at high speed. They are key power equipment in thermal power plants. The emergenc...[Details]
Fruit planting is an important part of China's agricultural development, and fruit tree pest control operations are becoming more and more important. At present, the overall level of pesticide applica...[Details]
As the global LED market demand continues to increase, my country's LED industry will face huge opportunities in the future. However, the core LED technology and patents are basically monopolized b...[Details]
Rated capacity refers to the maximum output power of the UPS (the product of voltage V and current A).
Usually, the UPS power supplies sold on the market are marked with "W" (watt) for smaller...[Details]
introduction
Belt drive is a common transmission device used in industrial production. Its commonly used speed detection device is a photoelectric encoder installed at the rotating end of th...[Details]
Designing low power circuits while achieving acceptable performance is a difficult task. Doing so in
the RF
bands increases the challenge dramatically. Today, nearly everything has wireless...[Details]
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
