To prevent damage to the components conformal coating, the leads should be adequately supported during the
forming process
H4P
Body Length (L) maximum:
Body Diameter (D) maximum:
Lead Diameter (d) maximum:
Lead Length (l) nominal:
Recommended Mounting Pitch:
Weight (g/100 resistors)
10.0 mm
3.70 mm
0.60 mm
30.0 mm
12.7 mm
40
H4
10.0 mm
3.70 mm
0.60 mm
30.0 mm
12.7 mm
40
H8
7.20 mm
2.50 mm
0.60 mm
30.0 mm
10.2 mm
24
Characteristics -
Long Term Stability
Long Term Stability
BS CECC 40101 004
Ratings at 70°C
H4 - 0.25 W
H8 - 0.125 W
Long Term Stability
BS CECC 40101 030
Ratings at 125°C
H4 - 0.125 W
H8 - 0.1 W
Long Term Stability
Commercial
Ratings at 125°C
H4P - 1W
H4 - 0.5 W
H8 - 0.25 W
Damp Heat Steady State
93% RH at 40°C
1773230 CIS BI 06/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to:
te.com/help
Axial Leaded Precision Resistors
Type HOLCO Series
Derating Graph -
Approved and Commercial Ratings
How to Order
H8
Common Part
H4P
H4
H8
100R
Resistance Value
1.0 ohm
(1000 milli ohms) 1R0
10 ohm
(10 ohms) 10R
100 ohm
(100 ohms) 100R
1K 0hm
(1000 ohms) 1K0
10K ohm
(10000 ohms) 10K
100K ohm
(100000 ohms) 100K
1M ohm
(1000000 ohms) 1M0
B
Tolerance
A - 0.05%
Y
T.C.R. Code
A - 5ppm
B - 10ppm
B
Release
A - Part can only
be sold with
Commercial or
C of C release.
B - Part can be
sold to BS CECC
40101 004,
BS CECC 40101
030
D - Part can
be sold to
BS CECC 40101
804
B - 0.1%
Y - 15ppm
C - 0.25%
D - 25ppm
D - 0.5%
C - 50ppm
F - 1.0%
Z - 100ppm
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
Can the program for msp430g2553 uscib0 spi be written like this? ? (No interrupt is needed, not IO emulation SPI) void Init_SPI(void) { // SCS - P2.0 // SCLK - P1.5 // MISO - P1.6 // MOSI - P1.7 P1DIR...
STM32F429IDISCOVERY data summary (the official software package has been released, including comprehensive programs and peripheral basic routines) [/font][/color] [size=4][color=rgb(51, 51, 51)][font=...
I encountered a strange phenomenon this morning. The power supply is a three-phase four-wire system. The three-phase voltage is 380V balanced and the three-phase voltage to ground is 220V normal. The ...
The sensor outputs a weak DC signal (<1mV). Considering the influence of noise, it cannot be directly amplified, so I want to improve the signal-to-noise ratio. I found on the Internet that someone us...
I want to use a single-chip microcomputer 3.3v to control a transistor switch power supply circuit. The DC power supply is 9v and the current is 25ma. It is closed when the high level is high and disc...
With the promotion of the construction of intelligent communities in the country, anti-theft systems have become essential equipment for intelligent communities. Especially in recent years, the urg...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
0. Introduction
In daily life, we often see some special-purpose vehicles. When these vehicles pass through intersections, they often obtain the right of way at intersections by temporarily op...[Details]
As cellular phones become more advanced, the power consumption of the system during operation and the power consumption during standby are also increasing. Therefore, the power management design of...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
We know that the inverter consists of two parts: the main circuit and the control circuit. Due to the nonlinearity of the main circuit (switching action), the inverter itself is a source of harmoni...[Details]
Motors are important products that convert electrical energy into mechanical energy to achieve automation, and they are widely used in industrial control, medical electronics, white a...[Details]
With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]
0 Introduction
There are many types of sensors, and the working principles, measurement targets and measurement environments of different types of sensors vary greatly. The corresponding detection s...[Details]
The demand for improved healthcare environments is endless, so medical imaging equipment with higher resolution is needed to better observe the human body. High resolution brings problems with sign...[Details]
LED is now known as the fourth generation of light sources. High-power LED has many advantages over traditional light sources in outdoor lighting.
1 LED lamps have high light efficiency
C...[Details]
Battery clamps, commonly known as battery connectors, come in two sizes depending on the thickness of the battery terminals. One is the battery clamp used on thick terminals, with a positive termin...[Details]
Electrostatic coupling and interference occur when a charged object is close to the input of the circuit being measured. At low impedance, the effects of interference are not noticeable because th...[Details]
This article focuses on closing the feedback loop of an isolated power supply using a TL431 shunt regulator. The article discusses a method to extend the bandwidth of the power supply control loop ...[Details]
With the popularity of digital appliances, rechargeable batteries can be seen everywhere in people's daily lives and have become one of the indispensable daily necessities.
This article gives ...[Details]