Loose
Taped
Fig.1
Fig.2
meTAllized PolYPRoPYlene Film CAPACiToR
SELF-HEALING PRoPERTIES
Typical applications:
interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRoDUCT CoDE:
R46
Not for use in series with the mains.
See www.kemet.com for more information.
X2 CLASS (IEC 60384-14) - MKP Series
R.46
Insulated rigid leads
Insulated flexible leads 0.5mm
2
note:
R.46 series has replaced the 1.40 series and 1.47 series.
For new design we suggest the use of the R.46 series.
Pitch Box thickness (B)
(mm)
(mm)
10.0
15.0
15.0
22.5
27.5
37.5
All
<7.5
≥7.5
All
All
All
Maximum dimensions (mm)
B max
H max
L max
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
Ø d ±0.05
p
≤15
0.6 or 0.8*
22.5
≤
p
≤
27.5
0.8
p = 37.5
1
*See size table.
All dimensions are in mm.
GeneRAl TeCHniCAl dATA
dielectric:
polypropylene film.
Plates:
metal layer deposited by evaporation under vacuum.
Winding:
non-inductive type.
leads:
tinned wire.
Protection:
plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
marking:
Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category:
40/110/56 IEC 60068-1
TeST meTHod And PeRFoRmAnCe
damp heat, steady state:
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
Test conditions 2nd
+40°C
±
2°C
93%
±
2%
56 days
+60°C
±
2°C
95%
±
2%
500 hours
Temperature:
Relative humidity (RH):
Test duration:
Performance
operating temperature range:
-40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
eleCTRiCAl CHARACTeRiSTiCS
Rated voltage (V
R
):
275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
0.01
µ
F to 10
µ
F
no dielectric breakdown or
flashover at 4.3 x V
R
(d.c.)/1 min
Capacitance change |
∆
C/C|:
≤
5%
Insulation resistance:
≥
50% of initial limit.
endurance:
Test conditions
Dielectric strength:
Capacitance range:
Capacitance values:
E6 series (IEC 60063 Norm).
Capacitance tolerances
(measured at 1 kHz):
±
10% (K);
±
20% (M);
tolerance
±
5% (J) available upon request
dissipation factor (dF):
tg
δ
10
-4
at +25°C
±
5°C:
Typical value
insulation resistance:
Test conditions
≤
10 (6)* at 1kHz
Temperature:
Test duration:
Voltage applied:
Performance
+110°C
±
2°C
1000 h
1.25 x V
R
+1000Vac 0.1 s/h
*
no dielectric breakdown or
flashover at 4.3 x V
R
(d.c.)/1 min
Capacitance change |
∆
C/C|:
≤
10%
Insulation resistance:
≥
50% of initial limit.
Resistance to soldering heat:
Test conditions
Dielectric strength:
Temperature:
Voltage charge time:
Voltage charge:
Performance
≥
1x10
5
M
Ω
(5x10
5
M
Ω
)
*
≥
30000 s (150000 s
)
*
+25°C
±
5°C
1 min
100 Vdc
for C
≤
0.33
µ
F
for C
>
0.33
µ
F
Solder bath temperature: +260°C
±
5°C
Dipping time (with heat screen):10 s
±
1 s
Performance
Capacitance change |
∆
C/C|:
≤
2%
Winding scheme
* Typical value
Test voltage between terminations
(on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C
±
5°C
single sided metallized
polypropylene film
09/2008
150
meTAllized PolYPRoPYlene Film CAPACiToR
SELF-HEALING PRoPERTIES
APPRoVAlS
Rated Cap.
275 Vac / 560 Vdc
Std dimensions
B
0.010
µF
0.015
µF
0.022
µF
0.033
µF
0.047
µF
0.068
µF
0.10
µF
0.010
µF
0.015
µF
0.022
µF
0.033
µF
0.047
µF
0.068
µF
0.10
µF
0.15
µF
0.15
µF
0.22
µF
0.22
µF
0.22
µF
0.33
µF
0.33
µF
0.33
µF
0.33
µF
0.33
µF
0.47
µF
0.47
µF
0.47
µF
0.56
µF
0.60
µF
0.15
µF
0.22
µF
0.33
µF
0.47
µF
0.68
µF
1.0
µF
1.0
µF
0.47
µF
0.68
µF
1.0
µF
1.5
µF
2.2
µF
2.2
µF
3.3
µF
4.7
µF
4.7
µF
1.5
µF
2.2
µF
2.2
µF
3.3
µF
4.7
µF
4.7
µF
6.8
µF
6.8
µF
10.0
µF
4.0
4.0
4.0
5.0
5.0
6.0
6.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
9.0
7.5
9.0
6.0
8.5
10.0
9.0
7.5
13.0
7.5
10.0
11.0
11.0
11.0
6.0
6.0
6.0
7.0
10.0
10.0
11.0
9.0
9.0
11.0
13.0
13.0
14.0
18.0
18.0
22.0
11.0
11.0
13.0
16.0
16.0
19.0
20.0
24.0
30.0
H
9.0
9.0
9.0
11.0
11.0
12.0
12.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
12.0
12.5
13.5
12.5
17.5
14.5
16.0
12.5
18.5
12.0
18.5
16.0
19.0
19.0
19.0
15.0
15.0
15.0
16.0
18.5
18.5
20.0
17.0
17.0
20.0
22.0
25.0
28.0
33.0
33.0
37.0
22.0
22.0
24.0
28.5
28.5
32.0
40.0
44.0
45.0
l
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
p
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Ø
d
max
dv/dt at
390Vdc
(V/
µ
s)
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
100
R46 KF
R46 KF
R46 KF
R46 KF
R46 KF
R46 KF
R46 KF
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
2100 - - N0
2150 - - N0
2220 - - N0
2330 - - M1
2470 - - N0
2680 - - M1
3100 - - M1
2100 - - 01
2150 - - 01
2220 - - 01
2330 - - 01
2470 - - 01
2680 - - 01
3100 - - M1
3150 - - M2
3150 - - L2
3220 - - M2
3220 - - L2
3220 - - 02
3330 - - N0
3330 - - M1
3330 - - N1
3330 - - 02
3330 - - 01
3470 - - 02
3470 - - N0
3470 - - M1
3560 - - N0
3600 - - N0
3150 - - 01
3220 - - M1
3330 - - N0
3470 - - N0
3680 - - M2
4100 - - N2
4100 - - N1
3470 - - 01
3680 - - M1
4100 - - M1
4150 - - M1
4220 - - M2
4220 - - M1
4330 - - M2
4470 - - M2
4470 - - M1
-
-
-
-
-
-
M
-
-
-
-
-
-
-
-
-
-
-
-
-
-
M
-
-
M
M
-
-
-
-
-
-
-
-
M
-
-
-
-
-
-
-
-
-
-
-
M
-
-
M
-
-
-
-
Part number
X2 CLASS (IEC 60384-14) - MKP Series
R.46
(**)
ENEC
IEC 60384-14
UL 1414
(up to 1µF, 85°C;
250Vac)
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
UL 1283
(310 Vac)
Class X2
File No.V4413
Across-the-line
Across-the-line
certified for
Canada
Electromagnetic
Interference
Filters
Electromagnetic
Interference
Filters certified
for Canada
Class X2
File No.E97797
File No.E97797
File No.E85238
CSA - C22.2 No.8
(310 Vac)
File No.E85238
GB/T 14472
File CQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
.
(**) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
lead
length
(mm)
AMMo-PACK
AMMo-PACK
REEL
Ø
500mm
REEL
Ø
500mm
Loose, short leads
Loose, long leads
Loose, long leads
Loose, insulated
rigid leads
Loose, insulated
flexible leads
04
+2
25
-1/+2
30
+5
30
+5
150
±5
P
2
(mm)
12.70
19.05
12.70
19.05
Taping style
Fig.
(No.)
1
2
1
2
Pitch
(mm)
10.0/15.0
22.5
10.0/15.0
22.5/27.5
ordering
code
(Digit 10 to
11)
DQ
DQ
CK
CK
00
50
40
51
52
R46 KW 4150 - - M1
R46 KW 4220 - - M2
R46 KW 4220 - - M1
R46 KW 4330 - - M1
R46 KW 4470 - - M2
R46 KW 4470 - - M1
R46 KW 4680 - - M2
R46 KW 4680 - - M1
R46 KW 5100 - - M1
Note: Ammo-pack is the preferred packaging for taped version.
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHoRT GUIDE To
CHooSE THE RIGHT FILM CAPACIToRS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
All dimensions are in mm
E12 Series available upon request
151
09/2008
meTAllized PolYPRoPYlene Film CAPACiToR
SELF-HEALING PRoPERTIES
APPRoVAlS
Rated Cap.
275 Vac / 560 Vdc
Std dimensions
B
0.033
µF
0.047
µF
0.068
µF
0.1
µF
0.1
µF
0.15
µF
0.15
µF
0.22
µF
0.33
µF
0.33
µF
0.33
µF
0.47
µF
0.47
µF
0.47
µF
0.47
µF
0.68
µF
0.68
µF
0.82
µF
0.47
µF
0.56
µF
0.56
µF
0.68
µF
1.0
µF
1.0
µF
1.5
µF
1.5
µF
2.2
µF
1.0
µF
1.5
µF
2.2
µF
3.3
µF
4.7
µF
4.7
µF
6.8
µF
2.2
µF
3.3
µF
4.7
µF
6.8
µF
10.0
µF
4.0
4.0
5.0
5.0
6.0
6.0
5.0
6.0
7.5
9.0
6.0
8.5
9.0
6.0
7.5
10.0
11.0
11.0
6.0
6.0
7.0
7.0
8.5
10.0
10.0
11.0
13.0
9.0
11.0
13.0
14.0
14.0
18.0
22.0
11.0
13.0
16.0
19.0
20.0
H
9.0
9.0
11.0
11.0
12.0
12.0
11.0
12.0
13.5
12.5
17.5
14.5
12.5
17.5
18.5
16.0
19.0
19.0
15.0
15.0
16.0
16.0
17.0
18.5
18.5
20.0
22.0
17.0
20.0
22.0
28.0
28.0
33.0
37.0
22.0
24.0
28.5
32.0
40.0
l
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
p
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
Ø
d
max
dv/dt at
390Vdc
(V/
µs)
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
100
100
100
100
100
R46 KF
R46 KF
R46 KF
R46 KF
R46 KF
R46 KF
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KN
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
R46 KR
2330 - - P0
2470 - - P0
2680 - - P0
3100 - - P1
3100 - - P0
3150 - - P0
3150 - - P0
3220 - - P0
3330 - - P0
3330 - - P1
3330 - - P2
3470 - - P0
3470 - - P1
3470 - - P2
3470 - - P3
3680 - - P1
3680 - - P0
3820 - - P0
3470 - - P1
3560 - - P1
3560 - - P0
3680 - - P0
4100 - - P1
4100 - - P0
4150 - - P1
4150 - - P0
4220 - - P0
4100 - - P0
4150 - - P0
4220 - - P0
4330 - - P0
4470 - - P1
4470 - - P0
4680 - - P0
M
M
-
M
-
M
-
M
-
-
M
-
M
-
M
-
-
-
-
M
-
-
-
-
-
-
-
-
-
-
-
M
-
M
-
-
-
Part number
X2 CLASS (IEC 60384-14) - MKP Series
R.46
(**)
ENEC
IEC 60384-14
UL 1414
(up to 1µF, 85°C;
250Vac)
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
UL 1283
(310 Vac)
Class X2
File No.V4413
Across-the-line
Across-the-line
certified for
Canada
Electromagnetic
Interference
Filters
Electromagnetic
Interference
Filters certified
for Canada
Class X2
File No.E97797
File No.E97797
File No.E85238
CSA - C22.2 No.8
(310 Vac)
File No.E85238
GB/T 14472
File
CQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
Not for use in series with the mains.
See www.kemet.com for more information.
.
(**) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
lead
length
(mm)
AMMo-PACK
AMMo-PACK
REEL
Ø
500mm
REEL
Ø
500mm
Loose, short leads
Loose, long leads
Loose, long leads
Loose, insulated
rigid leads
Loose, insulated
flexible leads
04
+2
25
-1/+2
30
+5
30
+5
150
±5
P
2
(mm)
12.70
19.05
12.70
19.05
Taping style
Fig.
(No.)
1
2
1
2
Pitch
(mm)
10.0/15.0
22.5
10.0/15.0
22.5/27.5
ordering
code
(Digit 10 to 11)
DQ
DQ
CK
CK
00
50
40
51
52
R46 KW 4220 - - P0
R46 KW 4330 - - P0
R46 KW 4470 - - P0
R46 KW 4680 - - P0
R46 KW 5100 - - P0
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Note: Ammo-pack is the preferred packaging for taped version.
All dimensions are in mm
E12 Series available upon request
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHoRT GUIDE To
CHooSE THE RIGHT FILM CAPACIToRS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
09/2008
152
Rated Cap.
300 Vac / 630 Vdc
Std dimensions
B
H
9.0
9.0
9.0
11.0
11.0
12.0
12.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
12.0
12.5
13.5
12.5
17.5
14.5
16.0
18.5
12.0
16.0
19.0
19.0
19.0
15.0
15.0
15.0
16.0
18.5
18.5
20.0
17.0
17.0
20.0
22.0
25.0
28.0
33.0
33.0
37.0
22.0
22.0
24.0
28.5
28.5
32.0
40.0
44.0
45.0
l
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
p
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
Ø
d
max
dv/dt at
390Vdc
(V/
µ
s)
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
100
Part number
meTAllized PolYPRoPYlene Film CAPACiToR
SELF-HEALING PRoPERTIES
APPRoVAlS
Not for use in series with the mains.
See www.kemet.com for more information.
Class X2
File No.V4413
X2 CLASS (IEC 60384-14) - MKP Series
R.46
0.010
µF
0.015
µF
0.022
µF
0.033
µF
0.047
µF
0.068
µF
0.10
µF
0.010
µF
0.015
µF
0.022
µF
0.033
µF
0.047
µF
0.068
µF
0.10
µF
0.15
µF
0.15
µF
0.22
µF
0.22
µF
0.22
µF
0.33
µF
0.33
µF
0.33
µF
0.33
µF
0.47
µF
0.47
µF
0.56
µF
0.60
µF
0.15
µF
0.22
µF
0.33
µF
0.47
µF
0.68
µF
1.0
µF
1.0
µF
0.47
µF
0.68
µF
1.0
µF
1.5
µF
2.2
µF
2.2
µF
3.3
µF
4.7
µF
4.7
µF
1.5
µF
2.2
µF
2.2
µF
3.3
µF
4.7
µF
4.7
µF
6.8
µF
6.8
µF
10.0
µF
4.0
4.0
4.0
5.0
5.0
6.0
6.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
9.0
7.5
9.0
6.0
8.5
10.0
7.5
13.0
10.0
11.0
11.0
11.0
6.0
6.0
6.0
7.0
10.0
10.0
11.0
9.0
9.0
11.0
13.0
13.0
14.0
18.0
18.0
22.0
11.0
11.0
13.0
16.0
16.0
19.0
20.0
24.0
30.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
R46 3F
R46 3F
R46 3F
R46 3F
R46 3F
R46 3F
R46 3F
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3N
R46 3N
R46 3N
R46 3N
R46 3N
R46 3N
R46 3N
R46 3R
R46 3R
R46 3R
R46 3R
R46 3R
R46 3R
R46 3R
R46 3R
R46 3R
R46 3W
R46 3W
R46 3W
R46 3W
R46 3W
R46 3W
R46 3W
R46 3W
R46 3W
2100 - - N0
2150 - - N0
2220 - - N0
2330 - - M1
2470 - - N0
2680 - - M1
3100 - - M1
2100 - - 01
2150 - - 01
2220 - - 01
2330 - - 01
2470 - - 01
2680 - - 01
3100 - - M1
3150 - - M2
3150 - - L2
3220 - - M2
3220 - - L2
3220 - - 02
3330 - - N0
3330 - - M1
3330 - - 02
3330 - - 01
3470 - - N0
3470 - - M1
3560 - - N0
3600 - - N0
3150 - - 01
3220 - - M1
3330 - - N0
3470 - - N0
3680 - - M2
4100 - - N2
4100 - - N1
3470 - - 01
3680 - - M1
4100 - - M1
4150 - - M1
4220 - - M2
4220 - - M1
4330 - - M2
4470 - - M2
4470 - - M1
4150 - - M1
4220 - - M2
4220 - - M1
4330 - - M1
4470 - - M2
4470 - - M1
4680 - - M2
4680 - - M1
5100 - - M1
-
-
-
-
-
-
M
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
M
-
-
-
-
-
-
-
-
M
-
-
-
-
-
-
-
-
-
-
-
M
-
-
M
-
-
-
-
(**)
ENEC
IEC 60384-14
UL 1414
(up to 1µF, 85°C;
250Vac)
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
UL 1283
(310 Vac)
Across-the-line
Across-the-line
certified for
Canada
Electromagnetic
Interference
Filters
Electromagnetic
Interference
Filters certified for
Canada
Class X2
File No.E97797
File No.E97797
File No.E85238
CSA - C22.2 No.8
(310 Vac)
File No.E85238
GB/T 14472
FileCQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
(**) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
lead
length
(mm)
AMMo-PACK
AMMo-PACK
REEL
Ø
500mm
REEL
Ø
500mm
Loose, short leads
Loose, long leads
Loose, long leads
Loose, insulated
rigid leads
Loose, insulated
flexible leads
04
+2
25
-1/+2
30
+5
30
+5
150
±5
P
2
(mm)
12.70
19.05
12.70
19.05
Taping style
Fig.
(No.)
1
2
1
2
Pitch
(mm)
10.0/15.0
22.5
10.0/15.0
22.5/27.5
ordering
code
(Digit 10 to 11)
DQ
DQ
CK
CK
00
50
40
51
52
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Note: Ammo-pack is the preferred packaging for taped version.
All dimensions are in mm
E12 Series available upon request
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHoRT GUIDE To
CHooSE THE RIGHT FILM CAPACIToRS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
153
09/2008
Loose
Fig.1
Taped
Fig.2
meTAllized PolYPRoPYlene Film CAPACiToR
SELF-HEALING PRoPERTIES
X2 CLASS (IEC 60384-14) - MKP
R.46
Typical applications:
interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
shock.
PRoDUCT CoDE:
R46
p
≤15
0.6 or 0.8*
p = 22.5
0.8
Not for use in series with the mains.
See www.kemet.com for more information.
Ø d ±0.05
*See size table.
All dimensions are in mm.
neW 125°C
Rated
Cap.
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
0.15 µF
0.15 µF
0.15 µF
0.22 µF
0.22 µF
0.22 µF
0.22 µF
0.33 µF
0.33 µF
0.33 µF
0.47 µF
275 Vac / 560 Vdc
Std dimensions
B
5.0
5.0
5.0
5.0
6.0
6.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
6.0
9.0
7.5
8.5
6.0
9.0
7.5
10.0
7.5
13.0
11.0
6.0
6.0
7.0
10.0
11.0
13.0
H
11.0
11.0
11.0
11.0
12.0
12.0
11.0
11.0
11.0
11.0
11.0
11.0
12.0
17.5
12.5
13.5
14.5
17.5
12.5
18.5
16.0
18.5
12.0
19.0
15.0
15.0
16.0
18.5
20.0
22.0
L
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
p
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
Ø
d
max
dv/dt at
390Vdc
(V/ µs)
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
Part number
R46 K F 2100 - - H1
R46 K F 2150 - - H1
R46 K F 2220 - - H1
R46 K F 2330 - - H1
R46 K F 2470 - - H1
R46 K F 2680 - - H1
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
R46 K I
2100 - - H1
2150 - - H1
2220 - - H1
2330 - - H1
2470 - - H1
2680 - - H1
3100 - - H1
3150 - - H2
3150 - - H3
3150 - - H1
3220 - - H1
3220 - - H2
3220 - - H3
3220 - - H4
3330 - - H1
3330 - - H2
3330 - - H3
3470 - - H1
-
-
-
-
-
M
-
-
-
-
-
-
-
-
-
-
-
M
M
-
M
M
M
M
-
-
-
-
-
-
GeneRAl TeCHniCAl dATA
dielectric:
polypropylene film.
Plates:
metal layer deposited by evaporation under vacuum.
Winding:
non-inductive type.
leads:
tinned wire.
Protection:
plastic case, thermosetting resin filled. Box material is
solvent resistant and flame retardant according to UL94 V0.
marking:
Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category:
40/125/56 IEC 60068-1
operating temperature range:
-40 to +125°C
IEC 60384-14; EN 60384-14
Related documents:
eleCTRiCAl CHARACTeRiSTiCS
Rated voltage (V
R
):
Capacitance range:
275 Vac (50/60Hz) / 560 Vdc
0.01µF to 1µF
TeST meTHod And PeRFoRmAnCe
endurance:
Test conditions
Temperature:
Test duration:
+125°C±2°C
1000 h
Voltage applied:
1.25 x V
R
+1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x V
R
(d.c.)/1 min
Capacitance change |∆C/C|:
≤
10%
Insulation resistance:
≥
50% of initial limit.
APPRoVAlS
(**)
ENEC
IEC 60384-14
UL 1414
(up to 1µF, 85°C;
250Vac)
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
UL 1283
(310 Vac)
CSA - C22.2 No.8
(310 Vac)
Class X2
File No.CA08.00063
0.15 µF
0.22 µF
0.33 µF
R46 K N 3150 - - H1
R46 K N 3220 - - H1
R46 K N 3330 - - H1
R46 K N 3470 - - H1
R46 K N 3680 - - H1
R46 K N 4100 - - H1
Across-the-line
Across-the-line
certified for
Canada
Electromagnetic
Interference
Filters
Electromagnetic
Interference
Filters certified
for Canada
File No.E97797
0.47 µF
0.68 µF
File No.E97797
1.0 µF
File No.E85238
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
File No.E85238
300Vac available upon request
E12 Series available upon request
All dimensions are in mm
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHoRT GUIDE To
CHooSE THE RIGHT FILM CAPACIToRS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
Approved according to IEC 60384-14
According to IEC 60065
(**) ENEC mark has replaced all the following European National
marks:
09/2008
154
Suggestions & Announcements
京公网安备 11010802033920号
EEWORLD
