Lists UL Recognized & CSA Certified configurations and performance capabilities as a Component Supplementary Protector.
Notes:
1
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.
2
Same as note 1, except that backup fuse is limited to 80A maximum.
3
2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.
4
Satisfies the requirements of clause 11.2.8.2.5 of CSA STD C22.2 No 100 for the use of supplementary protectors with portable generators.
Lists UL Recognized, CSA, VDE & TUV Certified configurations & performance capabilities as a Component Supplementary
Protector.
Notes:
1
General Purpose Ratings for UL/CSA Only.
2
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.
3
Same as note 1, except that backup fuse is limited to 80 A maximum.
Table C:
Lists UL Recognized, CSA Certified configurations and performance capabilities as Protectors, Supplementary for Marine
Electrical and Fuel Systems (CCN/Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft Electrical Devices,
Marine in accordance with ISO 8846 (CCN/Guide UZMK, File MQ1515) as Marine Supplementary Protectors.
Notes:
1
Available with special catalog number only (consult factory).
2
2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.
[align=center][b][font=宋体][size=14.0pt]Disassembling the Fire Emergency Light[/size][/font][/b][/align][align=center]DIY&Sharing—GravityShare[/align][align=center][align=center][font=宋体][size=12.0pt][...
I want to clarify a few issues:
1) Is there any difference between using the development tools Keil and IAR for development? What is the difference? (For example, burning and debugging)
2) Can both Ke...
RST does not know how to return a status of 0. Please help, experts #include "tiny24.h" #define uchar unsigned char #define uint unsigned int #define key PINB.2 #define IN PORTA.0 #define RST PORTA.1 ...
First, you need to prepare, download and install the Android or iOS client. If the CP2102 driver is not installed on your computer, you need to install the driver so that the serial port can be correc...