The Medallion 2100 Optical A/B Switch is a high-performance solution for network
protection and optical redundancy. Packaged in convenient 1 RU housing, this line of
optical switches provides an automatic or manual fiber switching function to protect the
network from inadvertent service outages due to up-stream optical signal degradation.
Each fiber’s optical signal power level is continuously monitored, as is an adjustable
optical trip threshold for each channel. If the primary fiber’s optical signal power level
falls below the desired optical trip threshold, the unit automatically switches to the
secondary fiber, thus eliminating the need for intervention of a system operator. The
Medallion 2100 is capable of manual switching or can be switched remotely via SNMP
or via a WEB browser adding optical protection to many system applications.
The Medallion 2100 series is designed as a low power, cost-effective, high-
performance switching solution for applications that demand reliable and rapid
response to changing network conditions.
Features
Automatic, Manual and Remote
Switching
Up to 4 Independent Switches
Auto-Switching Time Less than 10 ms
SNMPv2 Control Interface
Web Server
Front Panel LED Indicators
1 RU Rack-Mount Enclosure with Choice
of Dual Hot Swappable AC or DC
Redundant Power Supplies
Example Redundant Path Configuration for CATV Broadcast
Medallion 6000
RF In
CATV Tx (Main)
MAIN
Medallion 2100
Optical Switch
BACKUP
Medallion 7100/7200
EDFA
…
To WDM & PONs
RF In
Medallion 6000
CATV Tx (Backup)
Optical Characteristics
Property
Operating Wavelength
Insertion Loss
Return Loss
Polarization Dependent Loss
Repeatability
Cross Talk
Input Optical Power
Switching Time
Durability
Min.
1260
-
-
-
-
-
-
-
-
Typ.
≤
1.0
≥
50
≤
0.05
+/-0.02
≥
55
-
≤
10
≥
10
7
Max.
1620
1.5
-
0.1
+/-0.03
-
27
25
-
Units
nm
dB
dB
dB
dB
dB
dBm
ms
Cycles
| REV 2015.06
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 2100 Optical A/B Switch
DATASHEET | JUNE 2015
FIBER OPTICS
General and Mechanical Specifications
Property
Switching Threshold
Switching Mode
Optical Connector
Monitoring Interfaces
Operating Temperature
Storage Temperature
Power Consumption
Supply Range (VAC)
(VDC)
Dimensions
Individual Switches per Rack Unit
Requirement
20 dB dynamic range – see ordering info
Auto, Manual, Remote
SC/APC
100 Base-T Ethernet
Rear Panel RS-232 interface
Front Panel Indicators
0°C to 50°C
-25°C to 65°C
15 W
85 to 240 VAC, 50/60 Hz
36 - 72 VDC
430 mm x 300 mm x 44 mm
Up to 4
EN50083-2-2006
EN 55013
EN 61000-3-2
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 61000-3-3
FCC Part 15 (Subpart B, Class A), 107(b), 109(b)
IEC 60950-1/A1:2009
GR-2853-CORE
GR-2853-CORE
0% to 95%
Comments
Settable within range
Other styles available (see ordering information)
SNMPv2, WEB Graphical User Interface
Local Craft Interface
LED and Vacuum Fluorescent Display
Maximum
Agency Listings, EMI
Agency Listing, Safety
Transportation Vibration
Transportation Shock
Relative Humidity (non-condensing)
European Union “RoHS 2 Directive” Compliance
All homogenous materials contained in the product contain less than the maximum concentration levels for lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European
Union Directive 2011/65/EC (the “RoHS 2 Directive”)
| REV 2015.06
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 2100 Optical A/B Switch
DATASHEET | JUNE 2015
FIBER OPTICS
Outline Drawing
| REV 2015.06
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 2100 Optical A/B Switch
DATASHEET | JUNE 2015
FIBER OPTICS
Model Number Information (note 1)
2100 –
Logo &
Customer
Specific
0-EMCORE
logo
1-no
logo
Operating
Wavelength
0
- 1260 nm
to 1620 nm
–
Switch
Configuration
12 -
1 out, 2 in
13 -
1 out, 3 in
14 -
1 out, 4 in
1X -
1 out, X in
Switch
Quantity
01
– 1 switch
02
– 2
switches
03
– 3
switches
04
– 4
switches
0X
– X
switches
–
Optics
1-
SC/APC
2-
FC/APC
3-
E2000
Optical
Connection
1-
Front Mount
2-
Rear Mount
1
Switching
Threshold Range
1
–
(-20 dBm, +20 dBm)
Reserved
0
Power Supply
1 -
AC primary,
no secondary
2 -
DC primary,
no secondary
3 -
AC primary,
AC secondary
4 -
AC primary,
DC secondary
5 -
DC primary,
DC secondary
Note 1: Not all configurations are available - contact factory
Example: 2100-10-1204-11103 No logo, 1550 nm, 1 x 2 switch, 4 switches, SC/APC connectors, front mount connectors, -20
dBm to +20 dBm range, AC power supply primary, AC power supply secondary
| REV 2015.06
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Why does my PCB file not have Mechanical layers? There is no Mechanical layers in the Current Layer on the left. There is no checkbox for Mechanical layers in Design->Options either. What's going on? ...
I need to train sales and marketing staff recently. When making the courseware, I found that several concepts are very vague. I hope those who understand can help answer them: 1. What are the so-calle...
A few days ago, I was looking at boost circuits. The purpose was to increase the output voltage of the chip I/O port. Then, I thought that using pull-up resistors could also achieve this function. Wha...
When I run the program, I find that the program is stuck at the sentence in the send subroutine. It keeps running and terminating, but it is stuck at this place. What is the reason?...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
Distributed Wireless Communication System (DWCS) uses distributed antennas, distributed processing control, joint signal processing and other technologies to improve the system's spectrum efficie...[Details]
For battery-powered portable devices, in addition to breaking through the limitations of processing power, the performance of portable system power supplies also needs to be continuously improved. ...[Details]
introduction
Temperature and humidity are the main environmental parameters of industrial and agricultural production. It is of great significance to measure them accurately and timely. Using a s...[Details]
As countries around the world are leaning towards the new energy battery industry, lithium-ion power batteries, as the ideal energy source for the development of the 21st century, are attracting mo...[Details]
The situation of "excessive neutral current" mentioned here means that when the three-phase load is balanced, the neutral current is still too large, and the neutral current is more than 1.5 times ...[Details]
The Challenge:
Created to monitor the pulp production process in large paper mills to save energy and reduce costs.
The Solution:
To increase throughput, save energy, and op...[Details]
Do you have the basic terms of optics memorized? If not, read here.
Correlated Color Temperature: If the color of light emitted by a light source is closest to the color of light radiate...[Details]
Radio Frequency Identification (RFID) is an automatic identification technology that has matured since the 1980s. It uses radio frequency to exchange data in a non-contact two-way communication mode t...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
