P5-621137 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> P5-621137

P5-621137: DescriptionPushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Screw Terminal, Panel Mount-threaded; CategoryMechanical and electronic products switch; File Size696KB，2 Pages; ManufacturerOTTO; Websitehttp://www.ottoexcellence.com

Download Datasheet Parametric View All

P5-621137 Overview

Pushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Screw Terminal, Panel Mount-threaded

P5-621137 Parametric

Parameter Name	Attribute value
Maker	OTTO
Reach Compliance Code	unknown
ECCN code	EAR99
Actuator angle
Actuator length	0.312 inch
Actuator material	NYLON
Actuator stroke	4.572 mm
Actuator type	PUSHBUTTON
Other features	PURPLE, UNSEAL RED BEZ
body height	20.66 mm
Body length or diameter	22.23 mm
Nozzle length	0.437 inch
Casing type	5/8-24
Center contact plating	SILVER
Contact (AC) maximum rated load I	5A@115VAC
Contact (AC) maximum rated load M	3A@115VAC
Contact (AC) maximum rated R load	10A@115VAC
Maximum contact current (AC)	10 A
Maximum contact current (DC)	10 A
Contact (DC) maximum rated R load	10A@28VDC
Contact function	ON-OFF
contact time	SNAP ACTION
Maximum contact voltage (AC)	115 V
Maximum contact voltage (DC)	28 V
Dielectric withstand voltage	1050VRMS V
Electrical life	25000 Cycle(s)
End contact plating	SILVER
Shell material	ALUMINUM ALLOY
JESD-609 code	e4
Manufacturer's serial number	P5
Installation features	PANEL MOUNT-THREADED
Maximum operating force	17.79 N
seal	EPOXY
surface mount	NO
Switch action	ALTERNATE
switch function	SPST
Switch type	PUSHBUTTON SWITCH
Terminal surface	GOLD/SILVER
Terminal length	0.156 inch
Termination type	SCREW

Preview

Download Datasheet

View All

ALTERNATE

ACTION

ALTERNATE ACTION PUSHBUTTONS

SEALED AGAINST DUST & MOISTURE

The P5 Alternate Action switches match the P1, P3 and P8

Momentary Action Pushbutton models for mixed function

with common panel appearance. Now you can design panels

with both alternate and momentary action switches and have

uniform panel appearance. The P5 features alternate action

in the same pushbutton and housing configuration as the

momentary P1 and P3 and as a bonus, the P5 requires less

behind the panel space than the P1 and P3 momentary versions.

Push and the P5 switch turns “on.” Push again and the P5 switch

turns “off.” Positive tactile feedback is featured so the operator

is clearly aware the switch mode has been executed. The button

returns to the original position after each actuation.

To guard against front panel splash and dirt, the P5 series

is sealed at the button with OTTO’s patented “rolling

sleeve”principle. The terminals are sealed with epoxy, providing

a seal against flux during wiring and behind panel dirt and

moisture. The combination of sealing provides smooth operation

over a wide temperature range. Watertight sealing to IP68S is

available.

A vandal resistant style is available in the P5-V series. Custom

housings, shrouded buttons, contact configurations and

materials are available to suit your application requirements. We

also provide custom button engraving with epoxy ink backfill,

watertight versions and other special characteristics.

, Push O

“Push On

ff” action

Style P5-4

Style P5-3

Style P5-6

Style P5-1

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load

Resistive

Inductive

Lamp

Motor

DWV

Low Level

Electrical Life:

Mechanical Life:

Seal:

Operating Force:

Total Travel:

Overtravel:

Sea Level @ 28VDC

or 115VAC, 60/400Hz

10A

1050Vrms

10mA @ 30mV

25,000 cycles

1,000,000 cycles

IP64 & MIL-PRF-8805 Design 2 or IP68S

3.0 lbs. +1/-0.5 lb.

0.180 inches max

0.012 inches min

Features:

• Button sealed with patented “rolling sleeve” principle

• Contact area sealed at case & terminals

• Moistureproof & dusttight to IP64 & MIL-PRF-8805

Design 2 or watertight to IP68S

• Less than 25mΩ contact resistance

• Handles low level up to 10 amps

• Variety of mounting styles

• Engraved buttons available

• Choice of 9 button & 3 bezel colors

• Panel appearance matches most other OTTO

momentary pushbutton switches

• Unsealed construction also available

• RoHS/WEEE/Reach compliant

Operating Temp Range:

-55°C to +85°C

MATERIALS:

Case:

Button:

Terminals:

Terminal Hardware:

Mounting Hardware:

Anodized aluminum alloy

Thermoplastic

Brass, silver plate or gold plate for low level

Terminal lugs, lockwasher and screw for screw terminal option

Hex nut, lockwasher and panel seal on watertight switches

119

OTTO Full Line Catalog

Specifications Subject To Change Without Notice

Recommended Resources

Thyristor circuit using integrated flip-flop TD1028

Calculation circuit diagram to find the actual equivalent output resistance of an inverting amplifier

Flowing water lantern circuit

Homemade 20W fluorescent lamp dimmer circuit

Self-extinguishing super regeneration receiving circuit

AD1674 interfaces with PC bus through SN74LS244

【CN0029】Using DAC to achieve 8-16 channel programmable voltage and excellent temperature drift performance: Circuit Function and AdvantagesThis circuit is a multichannel DAC configuration with excellent temperature drift performance. It utilizes the AD5390/AD5391/AD5392 to provide 8 to 16 DAC channels and 1...; EEWORLD社区 ADI Reference Circuit

Learning experience for microcontroller beginners: Microcontroller is a very practical subject. Without practice, everything is just a mirage. It is very necessary to spend some money to buy a development board. ("The development board is like the see...; hodenshi 51mcu

Generally speaking, if there are two SD card slots on the board, are the card detection interrupts of these two SD card slots the same interrupt? Or is it in some other form?: In the environment of WinCE5.0/ARM9 (i.MX27 or other ARM9 cpu), generally speaking, if there are two SD card slots on the board, are the card detection interrupts of these two SD card slots the same (...; 38824520 Embedded System

Urgent help with the noise issue after UDA1341 WINCE plays system sounds?: How can I eliminate the noise generated by this chip after playing voice in the driver?...; less_than Embedded System

[The Big Secret of the Internet of Things Factory] How are circuit boards and data transmission modules produced?: ...; 成都亿佰特 RF/Wirelessly

How to measure battery capacity?: From electronic engineer technical exchange (12425841)...; yuanguangyi Test/Measurement

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components