MCP73113/4
Single-Cell Li-Ion/Li-Polymer Battery Charge Management
Controller with Input Overvoltage Protection
Features:
• Complete Linear Charge Management Controller:
- Integrated Input Overvoltage Protection
- Integrated Pass Transistor
- Integrated Current Sense
- Integrated Reverse Discharge Protection
• Constant Current/Constant Voltage Operation
with Thermal Regulation
• 4.15V Undervoltage Lockout (UVLO)
• 18V Absolute Maximum Input with OVP:
- 6.5V (MCP73113)
- 5.8V (MCP73114)
• High Accuracy Preset Voltage Regulation Through
Full Temperature Range (-5°C to +55°C): +0.5%
• Battery Charge Voltage Options:
- 4.10V, 4.20V, 4.35V or 4.4V
• Resistor Programmable Fast Charge Current:
- 130 mA-1100 mA
• Preconditioning of Deeply Depleted Cells:
- Available Options: 10% or Disable
• Integrated Precondition Timer:
- 32 Minutes or Disable
• Automatic End-of-Charge Control:
- Selectable Minimum Current Ratio:
5%, 7.5%, 10% or 20%
- Elapse Safety Timer: 4 HR, 6 HR, 8 HR or
Disable
• Automatic Recharge:
- Available Options: 95% or Disable
• Charge Status Output-Two Style Options
• Soft start
• Temperature Range: -40°C to +85°C
• Packaging: DFN-10 (3 mm x 3 mm)
Description:
The MCP73113/4 are highly integrated Li-Ion battery
charge management controllers for use in
space-limited and cost-sensitive applications. The
MCP73113/4 devices provide specific charge
algorithms for Li-Ion/Li-Polymer batteries to achieve
optimal capacity and safety in the shortest charging
time possible. Along with their small physical size, the
low number of external components make the
MCP73113/4 ideally suitable for portable applications.
The absolute maximum voltage, up to 18V, allows the
use of MCP73113/4 in harsh environments, such as
low cost wall wart or voltage spikes from plug/unplug.
The MCP73113/4 devices employ a constant current/
constant voltage charge algorithm. The various
charging voltage regulations provide design engineers
flexibility to use in different applications. The fast
charge, constant current value is set with one external
resistor from 130 mA to 1100 mA. The MCP73113/4
devices limit the charge current based on die
temperature during high power or high ambient
conditions. This thermal regulation optimizes the
charge cycle time while maintaining device reliability.
The PROG pin of the MCP73113/4 also serves as
enable pin. When high-impedance is applied, the
MCP73113/4 will be in Standby mode.
The MCP73113/4 devices are fully specified over the
ambient temperature range of -40°C to +85°C. They
are available in a 10-lead, DFN package.
Package Types (Top View)
MCP73113/4
3x3 DFN *
V
DD
1
V
DD
2
V
BAT
3
V
BAT
4
NC 5
EP
11
10 PROG
9 V
SS
8 V
SS
7 STAT
6 NC
Applications:
•
•
•
•
•
•
•
Low-Cost Li-Ion/Li-Poly Battery Chargers
MP3 Players
Digital Still Camera
Portable Media Players
Handheld Devices
Bluetooth
®
Headsets
USB Chargers
* Includes Exposed Thermal Pad (EP); see
Table 3-1.
2009-2013 Microchip Technology Inc.
DS22183D-page 1
MCP73113/4
Typical Application
MCP73113/4 Typical Application
AC-DC Adapter
C
IN
R
LED
1
2
7
V
DD
V
DD
STAT
V
BAT
3
C
OUT
+
1-Cell
Li-Ion
Battery
V
BAT
4
PROG
V
SS
10
9
5 NC
6 NC
R
PROG
–
V
SS
8
TABLE 1:
Charge
Voltage
4.10V
4.20V
4.35V
4.40V
Note 1:
2:
3:
4:
5:
6:
7:
8:
AVAILABLE FACTORY PRESET OPTIONS
OVP
Pre-
conditioning
Charge Current
Disable/10%
Disable/10%
Disable/10%
Disable/10%
Pre-
conditioning
Threshold
66.5%/71.5%
66.5%/71.5%
66.5%/71.5%
66.5%/71.5%
Precondition
Timer
Disable/
32 Minimum
Disable/
32 Minimum
Disable/
32 Minimum
Disable/
32 Minimum
Elapse
Timer
Disable/4 HR/
6 HR/8 HR
Disable/4 HR/
6 HR/8 HR
Disable/4 HR/
6 HR/8 HR
Disable/4 HR/
6 HR/8 HR
End-of-
Charge
Control
5%/7.5%/
10%/20%
5%/7.5%/
10%/20%
5%/7.5%/
10%/20%
5%/7.5%/
10%/20%
Automatic
Recharge
No/Yes
No/Yes
No/Yes
No/Yes
Output
Status
Type 1/
Type 2
Type 1/
Type 2
Type 1/
Type 2
Type 1/
Type 2
5.8V/6.5V
5.8V/6.5V
5.8V/6.5V
5.8V/6.5V
I
REG
: Regulated fast charge current.
V
REG
: Regulated charge voltage.
I
PREG
/I
REG
: Preconditioning charge current; ratio of regulated fast charge current.
I
TERM
/I
REG
: End-of-Charge control; ratio of regulated fast charge current.
MCP73113: V
OVP
= 6.5V, MCP73114: V
OVP
= 5.8V.
V
RTH
/V
REG
: Recharge threshold; ratio of regulated battery voltage, 0% or 95%. 0% = Disabled.
V
PTH
/V
REG
: Preconditioning threshold voltage.
Output Status: Type 1 Fault Output Status = High-Z, Type 2 Fault Output Status = Flashing.
TABLE 2:
Part
Number
STANDARD SAMPLE OPTIONS
V
REG
OVP
I
PREG
/I
REG
Pre-charge
Timer
32 Min.
32 Min.
32 Min.
Elapse
Timer
6 HR
6 HR
6 HR
I
TERM
/I
REG
Auto Recharge
Threshold
(0%=Disabled)
95%
95%
95%
V
PTH
/V
REG
Output
Status
Type 1
Type 1
Type 1
MCP73113-16S/MF
MCP73113-06S/MF
Note 1:
4.10V
4.20V
6.5V
6.5V
5.8V
10%
10%
10%
10%
10%
10%
71.5%
71.5%
71.5%
MCP73114-0NS/MF 4.20V
Customers should contact their distributor, representatives or field application engineer (FAE) for support and sample.
Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of
this document. Technical support is available through the web site at: http//support.microchip.com.
DS22183D-page 2
2009-2013 Microchip Technology Inc.
MCP73113/4
1.0
ELECTRICAL
CHARACTERISTICS
† Notice:
Stresses above those listed under “Maximum
Ratings” may cause permanent damage to the device. This is
a stress rating only and functional operation of the device at
those or any other conditions above those indicated in the
operational listings of this specification is not implied.
Exposure to maximum rating conditions for extended periods
may affect device reliability.
Absolute Maximum Ratings†
V
DD
................................................................................18.0V
V
PROG
..............................................................................6.0V
All Inputs and Outputs w.r.t. V
SS
............... -0.3 to (V
DD
+0.3)V
Maximum Junction Temperature, T
J
............ Internally Limited
Storage temperature .....................................-65°C to +150°C
ESD protection on all pins
Human Body Model (1.5 k in Series with 100 pF)4 kV
Machine Model (200 pF, No Series Resistance) .............300V
DC CHARACTERISTICS
Electrical Specifications:
Unless otherwise indicated, all limits apply for V
DD
= [V
REG
(Typical) + 0.3V] to 6V,
T
A
= -40°C to +85°C. Typical values are at +25°C, V
DD
= [V
REG
(Typical) + 1.0V]
Parameters
Supply Input
Input Voltage Range
Operating Supply Voltage
Supply Current
V
DD
V
DD
I
SS
4
4.2
—
—
—
—
Battery Discharge Current
Output Reverse Leakage
Current
I
DISCHARGE
—
—
0.5
0.5
6
Undervoltage Lockout
UVLO Start Threshold
UVLO Stop Threshold
UVLO Hysteresis
Overvoltage Protection
OVP Start Threshold
OVP Hysteresis
Regulated Output Voltage
Options
V
OVP
V
OVPHYS
V
REG
6.4
5.8
—
4.079
4.179
4.328
4.378
Output Voltage Tolerance
Line Regulation
Load Regulation
Supply Ripple Attenuation
Note 1:
V
RTOL
V
BAT
/
V
BAT
)/V
DD
|
V
BAT
/V
BAT
|
PSRR
-0.5
—
—
—
—
Not production tested. Ensured by design.
Voltage Regulation (Constant-Voltage Mode)
4.10
4.20
4.35
4.40
—
0.05
0.05
-46
-30
4.121
4.221
4.372
4.422
0.5
0.20
0.20
—
—
V
V
V
V
%
%/V
%
dB
dB
V
DD
= [V
REG
(Typical)+1V] to 6V
I
OUT
= 50 mA
I
OUT
= 50 mA - 150 mA
V
DD
= [V
REG
(Typical)+1V]
I
OUT
= 20 mA, 10 Hz to 1 kHz
I
OUT
= 20 mA, 10 Hz to 10 kHz
T
A
= -5°C to 55°C
V
DD
= [V
REG
(Typical)+1V]
I
OUT
= 50 mA
6.5
5.9
150
6.6
6.0
—
V
V
mV
MCP73113
MCP73114
V
START
V
STOP
V
HYS
4.10
4.00
—
4.15
4.05
100
4.25
4.15
—
V
V
mV
2
2
17
µA
µA
µA
Standby (PROG Floating)
Shutdown (V
DD
< V
BAT
,
or V
DD
< V
STOP
)
Charge Complete; V
DD
is present
—
—
4
700
30
50
16
6.5
5.5
1500
100
150
V
V
µA
µA
µA
µA
Shutdown (V
DD
< V
BAT
- 150 mV)
Charging
Standby (PROG Floating)
Charge Complete; No Battery;
V
DD
< V
STOP
Sym.
Min.
Typ.
Max.
Units
Conditions
2009-2013 Microchip Technology Inc.
DS22183D-page 5
MCU
京公网安备 11010802033920号
EEWORLD
