The Ortel PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA)
is an ideal building block for OEM system integrators. The family of
PONA 2100 series EDFAs is designed to meet the most demanding
noise performance requirements of CATV applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 2100 series EDFAs provide optical isolation on
the input and output of the gain block for stable, low noise operation.
The input and output optical signal power levels are detected for
monitoring and control. The input optical signal is amplified with
active gain control for a constant output power level, or with active
output power control for constant gain mode.
The PONA 2100
series EDFAs also provide monitors and associated alarms for all
vital characteristics. The optical output of the PONA 2100 series
EDFAs can be split into multiple ports by an optional external
splitter.
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.ortel.com.
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Optical / Electrical Characteristics
PROPERTY
Product Code
PERFORMANCE
Operating Input Power
Operating Input Power
Output Power
Noise Figure
(Note 2)
Pin
(dBm)
Pin
(dBm)
Po(dBm)
NF (dB)
NF (dB)
NF (dB)
Static Gain Flatness
Dynamic Gain Flatness
(Note 4)
GF (dB)
(dB)
(dB)
(dB)
Output Power Stability
Power Consumption
(steady state regime)
Notes
:
1.
2.
3.
4.
5.
(dB)
Psys(W)
Typ/Max
Typ/Max
Typ/Max
Max
Max
Max
Max
Max
Max
Max
Min
12
-10
14
+/-.25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.0
+/-0.5
+/-0.5
+/- 0.1
5
12
-10
17
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.25
+/-0.5
+/-0.5
+/- 0.1
7
12
-10
20
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.5
+/-1.0
+/-1.0
+/- 0.1
9
12
-10
22
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
12
12
-10
24
+/- .25
5.0/5.5
4.5/5.0
4.5/5.0
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
20
12
-10
26
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
27
12
-10
27
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
32
Nominal
-00 and -01 versions
-02 version
-03 version
(Note 3)
-00 and -02 versions
-01 version
-03 version
(Note 5)
50 C Case
o
UNIT
LIMIT
2114
2117
PONA MODELS
2120
2122
2124
2126
2127
COMMENTS
(note 1)
Unless stated otherwise all specifications apply over the full temperature range and humidity
Measured with 8 evenly spread signals @ 25°C,
Σ
Pin = 0 dBm.
Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1545 nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C; Gain
Flattened Option with
∆G
= +/-0.5dB is available for some Models
Stability over polarization and temperature
General and Mechanical Specifications
PROPERTY
GENERAL
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
Optical Connectors
Dimensions In Inches
REQUIREMENT
1530 ~ 1562nm
0°C to 50°C
-40°C to 85°C
20% to 85%
85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
19.0”W x 14.76”D x 1.72”H
Non-condensing
Standard
Optional
User Specified
19’’ Rack Mounted, 1U
Standard
COMMENTS
Ortel, a division of EMCORE
2 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Outline Drawing
AC and DC versions shown below with 8-port option
DC Version
AC Version
Ortel, a division of EMCORE
3 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Compliance Information
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
73/23/EEC Low Voltage Directive, amended by 93/68/EEC
EN 50083-2, (2001)
Cable networks for TV signals, sounds and interactive services, Part 2 Electromagnetic
Compatibility for equipment.
EN 55013
EN 61000-3-2
EN 55020
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 60950
EN 60825-1
EN 60825-2
CDRH
Mains Conducted Emissions
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
Electrical Fast Transient / Burst Immunity
Low Voltage Directives
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
Ordering Information
PONA21
-
-
-
-
Optical
Output
Power
14
- 14 dBm
17
- 17 dBm
20
- 20 dBm
22
- 22 dBm
24
- 24 dBm
26
- 26 dBm
27
- 27 dBm
Output
Ports
1
2
4
8
Input Voltage
AC
– 90-260V 50/60 Hz
DC
– - 48 V
SC
FC
EC
TC
GC
Connector
-
-
-
-
-
SC/APC
FC/APC
E2000/APC
SC/UPC
FC/UPC
GFF/ NF options
00 - Standard
01 - Standard with Gain Flattened option
02 - Standard with Low NF option
03 - Low NF and Gain Flattened
Note: The maximum number of output ports when using E2000 connectors is four. All other optical connectors allow for
the eight ports option
Example:
PONA2120-2-AC-SC-00:
Standard 20 dBm EDFA with AC Power Supply, two (2) optical outputs, and SC/APC optical connectors
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
_c_int00 is branch to start of boot.asm in RTS libray //Translated into Chinese, _c_int00 is the entry address of rts2800_ml.lib; · _c_int00 is the entry address of the C initialization code· When you...
When reading a paper, I saw a sentence "calculate the characteristic value of the collected BIOS image file and add it to the standard characteristic library." How to collect bios image files and what...
[align=left][size=4]Let's take a look at the definition of the headphone jack on the mobile phone and see if it can complete the function of hardware peripherals communicating with the mobile phone. T...
I am working on a gas detection project. I used to design it in Verilog HDL language, but now I am at a loss. Please give me some guidance and provide me with some gas sensor detection circuits. Thank...
[color=#333333][font=微软雅黑]Hello everyone: [/font][/color][font=微软雅黑][color=#333333] [/color][/font][color=#333333][font=微软雅黑] LED soft light strip products, DC 24V power supply, maximum working curren...
The TIA Portal software's shift instructions shift the contents of an accumulator bit by bit to the left or right. The number of bits shifted is determined by N. A left shift of N bits multiplies t...[Details]
"Have you set your calendar reminder?"
On August 24, Nvidia Robotics' official account posted a photo of a black gift box on a social media platform, with an attached greeting card sig...[Details]
On August 25th, Apple's expansion in India encountered new troubles. According to Bloomberg, Foxconn Technology Group has recalled approximately 300 Chinese engineers from India, further hindering ...[Details]
1. Introduction
Electronic scales are gradually replacing traditional measuring tools like springs and balances in everyday life, such as electronic price computing scales and electronic weigh...[Details]
With the continuous development of the industrial automation industry, we are seeing an increasing number of intelligent devices using flexible, efficient, and precise robotic arms to p...[Details]
According to Nikkei, Japan has performed poorly in responding to China's power semiconductor challenges.
There are five major companies in Japan's power chip market: Mitsubishi Electric,...[Details]
According to Nikkei, a survey found that global electric vehicle battery supply is expected to reach more than three times the required quantity due to
cooling
demand for electric vehicles,...[Details]
Tiantai Robot's official Weibo account announced on the evening of August 20 that Tiantai Robot Co., Ltd., together with strategic partners including Shandong Future Robot Technology Co., Ltd., Sha...[Details]
Batteries, at the core of new energy vehicles, are crucial to vehicle performance and range. Existing automotive batteries are categorized into lead-acid and lithium batteries. Currently, new energ...[Details]
With the gradual popularization of new energy vehicles in recent years, more and more people have been able to access and purchase electric vehicles. The structure of electric vehicles is composed ...[Details]
High-definition media consumption is experiencing a dual growth: an increase in the number of consumers and a transition to higher-definition content. This growth is driven by increasingly widespre...[Details]
introduction
The rapid development of science and technology has enabled mankind to quickly move from the Internet era to the big data era. As a result, the amount of data generated by people ...[Details]
A new multi-layer diffractive optical processor can block images in one direction while allowing images in another direction to pass through.
Researchers at the University of California,...[Details]
The drive shaft is the shaft in a universal joint that transmits power. As a high-speed, low-support rotating body, its dynamic balance is crucial. Generally, drive shafts undergo dynamic balancing...[Details]
Reasons for the wear of the roller press reducer shaft:
1. Since the expansion sleeve is subjected to a large torque, the mating surfaces of the shaft and the sleeve move relative to each other...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
