Configurable Four Output, Low Jitter Clock Generator for Automotive
Features
• AEC-Q100 Automotive Qualified
• Low RMS Phase Jitter: <1 ps (typ.)
• Complies with PCIe Gen1/2/3/4 Common Clock
Spec
• High Stability: ±25 ppm, ±50 ppm
• Wide Temperature Range:
- Automotive Grade 2: –40°C to +105°C
- Automotive Grade 3: –40°C to +85°C
• High Supply Noise Rejection: –50 dBc
• Four Format-Configurable Outputs:
- LVPECL, LVDS, HCSL, LVCMOS
• Available Pin-Selectable Frequency Table
- 1 Pin per Bank for 2 Frequency Sets
• Wide Frequency Range:
- 2.3 MHz – 460 MHz
• 20-Pin QFN Footprint (5.0 mm x 3.2 mm)
• Excellent Shock and Vibration Immunity
• High Reliability
- 20x better MTF than quartz-based devices
• Wide Supply Range of 2.25V to 3.6V
• Lead Free and RoHS-Compliant
General Description
The DSA400 is a four output clock generator. It utilizes
proven PureSilicon™ MEMS technology to provide
excellent jitter and stability while incorporating
additional device functionality.
The nominal frequencies of the outputs can be identical
or independently derived from common PLLs.
The four output DSA400 MEMS oscillators are
excellent choices for use as clock references in
automotive applications in which small size, low power
consumption, and long-term reliability are paramount.
The DSA400 is AEC-Q100 qualified.
Each output may be configured independently to
support a single-ended LVCMOS interface or a
differential interface. Differential options include
LVPECL, LVDS, or HCSL.
The DSA400 provides two independent select lines for
choosing between two sets of pre-configured
frequencies per bank. It also has two OE pins to allow
for enabling and disabling outputs.
The DSA400 is packaged in a 20-pin QFN (5 mm x
3.2 mm) and is available in extended commercial and
industrial temperature grades.
The DSA400 is a highly configurable device and is
factory programmed to meet the customer’s needs.
Microchip’s
ClockWorks Configurator
must be used to
choose the necessary options, create the final part
number, data sheet, and order samples.
Applications
•
•
•
•
Automotive Infotainment
Automotive ADAS
Autonomous Driving
In-Vehicle Network
Block Diagram
CONTROL
CIRCUITRY
BANK 1
MEMS
PLL
PLL
OE1
OE2
FSB1
FSB2
OUTPUT
CONTROL
AND
DIVIDERS
BANK 2
CLK2+
CLK2-
CLK3+
CLK3-
CLK0+
CLK0-
CLK1+
CLK1-
2020 Microchip Technology Inc.
DS20006356A-page 1
DSA400
1.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
Supply Voltage .......................................................................................................................................... –0.3V to +4.0V
Input Voltage ...................................................................................................................................... –0.3V to V
Dear brothers, please help me, why is the dead time of my EG8010 driver card gone? It is set to 1us. When I test it on the machine, it has overcurrent protection with a few hundred watts and keeps res...
DSP technology is one of the hottest technology fields in the semiconductor industry today. In recent years, the emergence of a large number of high-performance integrated DSP devices has made it easi...
Tektronix regularly holds exchanges for experts, scholars and engineers from the semiconductor industry chain. Now we share the best lectures with you. These lectures come from famous colleges and sen...
Does the MSP430 MCU have a reset status register? Which one is it? Freescale MCU has SRS (System Reset Status) to describe the reason for the last system reset. Does the 430 MCU have a similar registe...
With the improvement of ESP32 hardware and the gradual improvement of the ESP32 version of MicroPython, more and more MicroPython uses ESP32, so the next target of micropython is ESP32. ESP32 is an up...
Abstract:
With the increasing complexity of smart vehicle electrical and electronic architectures, the full lifecycle management of vehicle electronic control components faces multiple challe...[Details]
Nios II is a configurable 16-/32-bit RISC processor. Combined with a rich set of peripheral-specific instructions and hardware acceleration units, it provides a highly flexible and powerful SOPC sy...[Details]
Is electromagnetic radiation from electric vehicles harmful to the human body? Recently, the issue of electromagnetic radiation from electric vehicles has garnered widespread attention. However, pu...[Details]
When we travel in cities, we all find that electric vehicles have many advantages. As a means of transportation, they can also fulfill their mission well. Now, more and more residential communities...[Details]
With the rapid adoption of smart electric vehicles, automotive chips are evolving from auxiliary control units to the foundation of the entire vehicle's intelligence. Their applications extend from...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
On August 21st, Zhiyuan Robotics revealed at its first partner conference that it expects shipments to reach thousands of units this year and tens of thousands next year. The company hopes to reach...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
Laird Thermal Systems has introduced the HiTemp ET series Peltier cooler modules, which can operate at high temperatures and provide on-site cooling for sensitive electronic devices.
Dig...[Details]
On August 20, Geely announced its focus on "One Cockpit". Through a unified AI OS architecture, a unified AI Agent, and a unified user ID, it will achieve an All-in-One AI cockpit, create the first...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
Previously, Positive Motion Technology shared with you the firmware upgrade of motion controller, ZBasic program development, ZPLC program development, communication with touch screen and input/out...[Details]
With the gradual popularization of new energy vehicles in recent years, more and more people have been able to access and purchase electric vehicles. The structure of electric vehicles is composed ...[Details]
introduction
In recent years, multi-touch has emerged as a new alternative to traditional human-computer interaction. It eliminates the need for keyboards and mice, enabling simultaneous inter...[Details]
introduction
As core electronic components used in vastly different fields, automotive-grade chips and mobile/consumer-grade chips exhibit significant differences in their...[Details]
Switching Power Supply Study Group
京公网安备 11010802033920号
EEWORLD
