I am making a HID device and need to add IAP function, but I don't want to make two devices. In other words, I want to use HID device to update the program, not STM's DFU....
Hi experts, I am looking for a 600V 5A TO-252 package MOS with an internal resistance of about 300 mA. Do you have any recommendations? Imported ones are preferred. Welcome to leave a message to help....
1. Circuit Schematic Preparation The voltage of a nickel-metal hydride battery is only 1.2V, while the ultra-bright LED requires a working voltage of more than 3.3V to ensure sufficient brightness. Th...
In the following definitionstruct HISPCP_BITS { // bits descriptionUint16 HSPCLK:3; // 2:0 Rate relative to SYSCLKOUTUint16 rsvd1:13; // 15:3 reserved};Why is there a colon in HSPCLK:3 after the uint1...
How should DSP be connected to parallel DA to output the processed data? The DSP of 5509A uses 8-bit parallel AD at the input end (occupying CE0 space and D0-D7 of DSP data line). How should the data ...
1. Introduction
I had just received the board and set up the development environment, but was stuck at the step of downloading the program. I felt that there were some problems when installing the dev...
Emergency hand-held lamps powered by 6V maintenance-free batteries are widely used in rural areas. The charger used is a transformer step-down and single diode half-wave rectifier, and the charging...[Details]
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
0 Introduction
With the development of my country's economy, the number of motor vehicles continues to increase. The growth of existing roads and other hardware facilities can no longer meet t...[Details]
Microcontrollers (MCUs), which are widely used in automotive electronics, are rapidly facing time and cost pressures. The main advantage of using MCUs has always been to create high-level system in...[Details]
In recent years, lighting has become an important area that countries around the world are targeting to promote energy conservation and environmental protection. According to statistics, about 20% ...[Details]
With the continuous improvement of the requirements of intelligent building security systems and the continuous improvement of people's safety awareness, indoor anti-theft has gradually attracted peop...[Details]
1. Introduction to CIF Board
Fieldbus integration based on PC system
Whether it is a master or a slave, fieldbus has won unanimous praise in the field of PC-based automation. For more...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
introduction
MEMS is a high-tech that has flourished on the basis of integrated circuit production technology and dedicated micro-electromechanical processing methods. Pressure sensors develop...[Details]
Abstract: The output of high-range acceleration sensor is less than 10 mV under the excitation of small signal. The noise of traditional test system may cover such small voltage signal, so that hig...[Details]
LED technology has made rapid progress, and improvements in chip design and materials have promoted the development of brighter and more durable light sources, and the scope of light source applica...[Details]
Since AC mains power may experience power outages, voltage sags and surges, continuous undervoltage and overvoltage, and frequency fluctuations during supply, these factors will affect the continuous ...[Details]
Currently, each country is developing its own USB interface
charging specifications
, which leads to a major problem that a USB interface
charging
device manufactured in one country...[Details]