EEWORLDEEWORLDEEWORLD

Part Number

Search

PIC24FJ16GA004-EPT

Description
PIC24FJXXXGA0XX Flash Programming Specification
File Size322KB,52 Pages
ManufacturerMicrochip
Websitehttps://www.microchip.com
Download Datasheet Compare View All

PIC24FJ16GA004-EPT Overview

PIC24FJXXXGA0XX Flash Programming Specification

PIC24FJXXXGA0XX
PIC24FJXXXGA0XX Flash Programming Specification
1.0
DEVICE OVERVIEW
The Enhanced In-Circuit Serial Programming
(Enhanced ICSP) protocol uses a faster method that
takes advantage of the programming executive, as
illustrated in Figure 2-1. The programming executive
provides all the necessary functionality to erase, pro-
gram and verify the chip through a small command set.
The command set allows the programmer to program
the PIC24FJXXXGA0XX devices without having to
deal with the low-level programming protocols of the
chip.
This document defines the programming specification
for the PIC24FJXXXGA0XX family of 16-bit micro-
controller devices. This programming specification is
required only for those developing programming support
for the PIC24FJXXXGA0XX family. Customers using
only one of these devices should use development
tools that already provide support for device
programming.
This specification includes programming specifications
for the following devices:
• PIC24FJ16GA002
• PIC24FJ16GA004
• PIC24FJ32GA002
• PIC24FJ32GA004
• PIC24FJ48GA002
• PIC24FJ48GA004
• PIC24FJ64GA002
• PIC24FJ64GA004
• PIC24FJ64GA006
• PIC24FJ64GA008
• PIC24FJ64GA010
This specification is divided into major sections that
describe the programming methods independently.
Section 4.0 “Device Programming – Enhanced
ICSP”
describes the Run-Time Self-Programming
(RTSP) method.
Section 3.0 “Device Programming –
ICSP”
describes the In-Circuit Serial Programming
method.
On-Chip Memory
FIGURE 2-1:
• PIC24FJ96GA006
• PIC24FJ96GA008
• PIC24FJ96GA010
• PIC24FJ128GA006
• PIC24FJ128GA008
• PIC24FJ128GA010
Programmer
PROGRAMMING SYSTEM
OVERVIEW FOR
ENHANCED ICSP™
PIC24FJXXXGA0XX
Programming
Executive
2.0
PROGRAMMING OVERVIEW
OF THE PIC24FJXXXGA0XX
FAMILY
There are two methods of programming the
PIC24FJXXXGA0XX family of devices discussed in
this programming specification. They are:
• In-Circuit Serial Programming™ (ICSP™)
• Enhanced In-Circuit Serial Programming
(Enhanced ICSP)
The ICSP programming method is the most direct
method to program the device; however, it is also the
slower of the two methods. It provides native, low-level
programming capability to erase, program and verify
the chip.
2.1
Power Requirements
All devices in the PIC24FJXXXGA0XX family are dual
voltage supply designs: one supply for the core and
peripherals and another for the I/O pins. A regulator is
provided on-chip to alleviate the need for two external
voltage supplies.
All of the PIC24FJXXXGA0XX devices power their core
digital logic at a nominal 2.5V. To simplify system
design, all devices in the PIC24FJXXXGA0XX family
incorporate an on-chip regulator that allows the device
to run its core logic from V
DD
.
©
2008 Microchip Technology Inc.
DS39768D-page 1

PIC24FJ16GA004-EPT Related Products

PIC24FJ16GA004-EPT PIC24FJ96GA
Description PIC24FJXXXGA0XX Flash Programming Specification PIC24FJXXXGA0XX Flash Programming Specification
Selling blackfin technology BV561EVB_V2 single channel DVRIPCamera development board
1.1 Motherboard Hardware Standard Configuration BF561SKBCZ-5A (17by17) (Can provide loose chips for customers in urgent need) SDRAM: 64M NOR FLASH: 16M, SPI FLASH, can be jumped to choose to start fro...
lhy705 Embedded System
I would like to ask you a question, please don't laugh at me...
Since I have never designed a multilayer board, this question is ridiculous... I designed 4 layers, with the power and ground layers in the middle. I added a power layer in the Lay stack manager in PT...
yiyng PCB Design
Chapter 30 C51 Learning Tutorial
Chapter 30 C51 Learning Tutorial, if you are interested, please download...
wuhong26 51mcu
Solution to the problem of being unable to log in to TI classroom
Many netizens reported that they were unable to log in to the TI classroom normally. To be honest, I also encountered this problem.At the beginning, I used Google Chrome. When I logged in, the web pag...
wstt Microcontroller MCU
Ask a question about switching between various modes of the msp430 chip
[color=#000][font="][size=12px]I have a question. Can the switching between the various modes of 430 be done directly? Or do I need to exit the current mode first and then switch to another mode? For ...
fish001 Microcontroller MCU
It's still a problem of variable initialization.
[i=s] This post was last edited by dontium on 2015-1-23 13:41 [/i] Hello experts, I have a question. Since there are quite a lot of variables, especially a 15-dimensional array, it is quite cumbersome...
avermei Analogue and Mixed Signal

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2026  1328  1226  2151  1164  41  27  25  44  24 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号