Configurable Four Output, Low Jitter Clock Generator for Automotive
Features
• AEC-Q100 Automotive Qualified
• Low RMS Phase Jitter: <1 ps (typ.)
• Complies with PCIe Gen1/2/3/4 Common Clock
Spec
• High Stability: ±25 ppm, ±50 ppm
• Wide Temperature Range:
- Automotive Grade 2: –40°C to +105°C
- Automotive Grade 3: –40°C to +85°C
• High Supply Noise Rejection: –50 dBc
• Four Format-Configurable Outputs:
- LVPECL, LVDS, HCSL, LVCMOS
• Available Pin-Selectable Frequency Table
- 1 Pin per Bank for 2 Frequency Sets
• Wide Frequency Range:
- 2.3 MHz – 460 MHz
• 20-Pin QFN Footprint (5.0 mm x 3.2 mm)
• Excellent Shock and Vibration Immunity
• High Reliability
- 20x better MTF than quartz-based devices
• Wide Supply Range of 2.25V to 3.6V
• Lead Free and RoHS-Compliant
General Description
The DSA400 is a four output clock generator. It utilizes
proven PureSilicon™ MEMS technology to provide
excellent jitter and stability while incorporating
additional device functionality.
The nominal frequencies of the outputs can be identical
or independently derived from common PLLs.
The four output DSA400 MEMS oscillators are
excellent choices for use as clock references in
automotive applications in which small size, low power
consumption, and long-term reliability are paramount.
The DSA400 is AEC-Q100 qualified.
Each output may be configured independently to
support a single-ended LVCMOS interface or a
differential interface. Differential options include
LVPECL, LVDS, or HCSL.
The DSA400 provides two independent select lines for
choosing between two sets of pre-configured
frequencies per bank. It also has two OE pins to allow
for enabling and disabling outputs.
The DSA400 is packaged in a 20-pin QFN (5 mm x
3.2 mm) and is available in extended commercial and
industrial temperature grades.
The DSA400 is a highly configurable device and is
factory programmed to meet the customer’s needs.
Microchip’s
ClockWorks Configurator
must be used to
choose the necessary options, create the final part
number, data sheet, and order samples.
Applications
•
•
•
•
Automotive Infotainment
Automotive ADAS
Autonomous Driving
In-Vehicle Network
Block Diagram
CONTROL
CIRCUITRY
BANK 1
MEMS
PLL
PLL
OE1
OE2
FSB1
FSB2
OUTPUT
CONTROL
AND
DIVIDERS
BANK 2
CLK2+
CLK2-
CLK3+
CLK3-
CLK0+
CLK0-
CLK1+
CLK1-
2020 Microchip Technology Inc.
DS20006356A-page 1
DSA400
1.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
Supply Voltage .......................................................................................................................................... –0.3V to +4.0V
Input Voltage ...................................................................................................................................... –0.3V to V
I created a dialog box with two edit boxes, one for editing the contents of the written file and the other for displaying the contents of the read file. There are also two buttons, one for writing and...
For a CPU card with ISO7816 protocol, I first write two key files: one in MF\EF1 with 3 keys; the other in MF\DF\EF2. Why when I read the card, I use 3DES encryption and external authentication to rea...
Since there is a project involving hardware development, we are now looking for people with rich hardware development experience in Wuhan (preferably in Wuchang) to cooperate on the project. The speci...
For example: I dialed 10000 and used ATD10000;. After dialing, I don't know how to continue to dial the "1" key, and continuing to use ATD1; has no effect. Please help!...
The problem of dynamic sealing of equipment always exists with the operation of the equipment. Today, we have specially sorted out the various commonly used sealing forms, usage scope and character...[Details]
Definition of interactive projection system:
Interactive projection systems, also known as multimedia interactive projection, are available in floor, wall, and tabletop interactive projection....[Details]
introduction
The concept of the smart home is gradually developing and gaining market acceptance. We believe its ultimate form lies in the interconnection of all home appliances through open i...[Details]
Electric vehicles are becoming increasingly popular, with increasingly longer ranges. There are two ways to charge electric vehicles: slow charging and fast charging. Which is the most suitable? Sl...[Details]
With the continuous development of the industrial automation industry, we are seeing an increasing number of intelligent devices using flexible, efficient, and precise robotic arms to p...[Details]
According to Nikkei, a survey found that global electric vehicle battery supply is expected to reach more than three times the required quantity due to
cooling
demand for electric vehicles,...[Details]
Recently, Joyson Electronics has made positive progress in the core technology research and development of the robot's "brain and brain" and key components, and launched the industry's first integr...[Details]
Tiantai Robot's official Weibo account announced on the evening of August 20 that Tiantai Robot Co., Ltd., together with strategic partners including Shandong Future Robot Technology Co., Ltd., Sha...[Details]
Inverter power supplies on the market can generally be divided into two categories: sine wave inverters and square wave inverters. Some engineers also like to categorize pure sine wave inverters as...[Details]
Methods of DC motor speed regulation:
1. The voltage regulator can be used to change the input voltage and speed directly, which is often used for large kilowatt-level motors.
2. Thyristo...[Details]
Consumer demand for premium listening experiences has driven rapid evolution in the wireless headphone market in recent years. Hybrid designs, which utilize two drivers per earbud to enhance sound ...[Details]
High-definition media consumption is experiencing a dual growth: an increase in the number of consumers and a transition to higher-definition content. This growth is driven by increasingly widespre...[Details]
Hair dryer structure and working principle: It is mainly used for drying and shaping hair, but it can also be used for local drying, heating and treatment in laboratories, physiotherapy rooms, ind...[Details]
Silicon Labs (also known as "Silicon Labs"), an innovative leader in low-power wireless connectivity, will showcase its cutting-edge artificial intelligence (AI) and Internet of Things (IoT) solu...[Details]
The Waveshare ESP32-P4-ETH is a compact ESP32-P4 development board with Ethernet and PoE support. It looks very similar to the Olimex ESP32-P4-DevKit, minus the pUEXT connector. However, we've also...[Details]