Ordering Information .................................................................................................................................................................... 2
Device Configurations and Pin-outs ............................................................................................................................................. 9
Pin-out Top Views................................................................................................................................................................. 9
Test Circuit Diagrams for LVCMOS and Clipped Sinewave Outputs ......................................................................................... 10
Frequency Stability ............................................................................................................................................................. 16
Output Frequency and Format ............................................................................................................................................ 16
Output Frequency Tuning ................................................................................................................................................... 16
Pin 1 Configuration (OE, VC, or NC) .................................................................................................................................. 17
Control Voltage Bandwidth ................................................................................................................................................. 20
Pull Range and Average Pull Range .................................................................................................................................. 22
Output Frequency ............................................................................................................................................................... 23
I
2
C Control Registers .......................................................................................................................................................... 25
Serial Interface Configuration Description .......................................................................................................................... 28
Serial Signal Format ........................................................................................................................................................... 28
Parallel Signal Format ........................................................................................................................................................ 29
Parallel Data Format ........................................................................................................................................................... 29
I
2
C Timing Specification ...................................................................................................................................................... 31
I
2
C Device Address Modes ................................................................................................................................................. 32
Schematic Example ............................................................................................................................................................ 33
Dimensions and Patterns ........................................................................................................................................................... 34
Additional Information ................................................................................................................................................................ 36
Revision History ......................................................................................................................................................................... 36
Rev 0.52
Page 3 of 36
www.sitime.com
SiT5146
1 MHz to 60 MHz, ±0.5 to ±2.5 ppm, Endura™ Series Super-TCXO
Electrical Characteristics
PRELIMINARY
All Min and Max limits are specified over temperature and rated operating voltage with 15 pF output load unless otherwise
stated. Typical values are at 25°C and 3.3V Vdd.
Table 1. Output Characteristics
Parameters
Nominal Output Frequency Range
Operating Temperature Range
Symbol
F_nom
T_use
Min.
1
-20
-40
-40
Acceleration (g) sensitivity, Gamma
Vector
F_g
–
–
Typ.
–
–
–
–
Max.
60
+70
+85
+105
Unit
MHz
°C
°C
°C
Extended Commercial, ambient temperature
Industrial, ambient temperature
Extended Industrial, ambient temperature
Ultra-low sensitivity grade; total gamma over 3 axes; 15 Hz
to 2 kHz; MIL-PRF-55310, computed per section 4.8.18.3.1
Low sensitivity grade; total gamma over 3 axes; 15 Hz to
2 kHz; MIL-PRF-55310, computed per section 4.8.18.3.1
Referenced to (max frequency + min frequency)/2 over the
rated temperature range. Vc=Vdd/2 for VCTCXO
Condition
Frequency Coverage
Temperature Range
Rugged Characteristics
0.004
–
0.009
0.1
ppb/g
ppb/g
Frequency Stability
Frequency Stability over
Temperature
F_stab
-0.5
-1.0
-2.5
Initial Tolerance
Supply Voltage Sensitivity
F_init
F_Vdd
-1
-16.25
-32.50
-65.0
Output Load Sensitivity
F_load
-2.75
-5.50
-11.00
Frequency vs. Temperature Slope
ΔF/ΔT
-25
-50
-100
Dynamic Frequency Change during
Temperature Ramp
F_dynamic
-0.21
-0.42
-0.83
One-Year Aging
20-Year Aging
F_1y
F_20y
–
–
–
–
–
–
±7.10
±11.83
±28.40
±0.81
±1.35
±3.24
±15
±25
±60
±0.13
±0.21
±0.50
±1
±2
+0.5
+1.0
+2.5
+1
+16.25
+32.50
+65.0
+2.75
+5.50
+11.00
+25
+50
+100
+0.21
+0.42
+0.83
–
–
ppm
ppm
ppm
ppm
ppb
ppb
ppb
ppb
ppb
ppb
ppb/°C
ppb/°C
ppb/°C
ppb/s
ppb/s
ppb/s
ppm
ppm
Initial frequency at 25°C inclusive of solder-down shift
[i=s]This post was last edited by qwqwqw2088 on 2018-7-27 08:06[/i] High-efficiency strong light flashlight driving solution: effectively extend battery life [size=6]Click the link below to watch the ...
Chairman Mao Zedong has been away from the people for 37 years. The people will not forget him because he put the people in his heart: 1. He gave power to the people. The proletarian cultural revoluti...
[i=s]This post was last edited by lonerzf on 2014-12-3 08:35[/i] I finally debugged the host computer today, I am very happy. :loveliness:It is mainly divided into 4 parts MSP430FR5969 expansion board...
Wince5.0 supports 1G virtual memory and 512M physical memory. Part of the 1G virtual memory is mapped to the physical memory, so where is the rest mapped to? Is it ROM, FLASH? If there is no hard disk...
Does anyone have the electronic version of Voltage Sourced Converters in Power Systems? I need it urgently for my paper! Thank you. Email: [email]1772931481@qq.com[/email]...
I am using the MSP430149 microcontroller and want to distinguish between cold reset (power-on reset) and hot reset (non-power-off reset) so that the program can perform different functions. Cold reset...
Dual-mode inverters can operate both in conjunction with the grid and independently. These inverters can inject excess energy from renewable energy and storage devices into the grid, and withdraw p...[Details]
There are many different ways of human-computer interaction. The more common ones are listed below:
Mouse interaction: Using a mouse to operate a computer and interact was the most common human...[Details]
Tesla and BYD, vying for dominance in the global electric vehicle market, are reportedly considering adopting Samsung's AMOLED (active-matrix organic light-emitting diode) technology for their next...[Details]
How do you know if a machine is operating properly? The answer: by leveraging deep learning to detect anomalies in routine vibration data from industrial machines. Anomaly detection has many uses, ...[Details]
The problem of dynamic sealing of equipment always exists with the operation of the equipment. Today, we have specially sorted out the various commonly used sealing forms, usage scope and character...[Details]
introduction
With the development of digital and network technologies, broadcasting technology has become increasingly diversified, with the most significant trend being the transition from an...[Details]
Some time ago, I attended the 4th Energy Chemistry Forum of the Chinese Chemical Society and learned about high-energy-density and high-safety batteries. I would like to summarize and share this wi...[Details]
The most significant feature of IPS panels is that both electrodes are located on the same surface, unlike other LCD panels, which have electrodes arranged on top and bottom surfaces in a three-dim...[Details]
summary
There are multiple approaches to making industrial systems more intelligent, including applying artificial intelligence (AI) technology at the edge and in the cloud to sensor...[Details]
Amidst the wave of intelligent automotive transformation, advanced driver assistance is gradually emerging from cutting-edge technology into the mainstream, becoming a new frontier of industry comp...[Details]
As the scale and business applications of national e-government networks continue to expand, the data and services transmitted over them are becoming increasingly sensitive and critical. To protect...[Details]
Normally, we determine our location and where we want to go by comparing our surroundings with observation and simple GPS tools. However, this kind of reasoning is very difficult for self-driving c...[Details]
Charging is a familiar process for new energy vehicles, and as a source of battery energy, charging piles are crucial. New energy vehicle charging can be divided into fast charging and slow chargin...[Details]
Reflow soldering is one of the most commonly used methods in electronics manufacturing, allowing for the soldering of large numbers of components in a relatively short time. However, any experience...[Details]
During daily operation of an R-type power transformer, the voltage used varies as the equipment being used adjusts. This raises the question: can the transformer change voltage at this point? The a...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
