Military and Space Established Reliability (ER)
Vishay Foil Resistors
Z-Bulk Metal
®
Foil Technology
RNC90Z to MIL-PRF-55182/9
FEATURES
•
QPL product with established reliability (ER): meets
requirements of MIL-PRF-55182/9
•
Temperature coefficient of resistance (TCR): ± 2 ppm/°C
max. (- 55 °C to + 175 °C)
•
Load life stability: to 0.005 %, 0.3 W at + 125 °C for 2000 h
•
Resistance tolerance: to ± 0.005 %
•
Qualified resistance range: 30.1
Ω
to 121 kΩ (for other
values please check Z555)
•
Electrostatic discharge (ESD) above 25 000 V
•
Non inductive, non capacitive design
•
Current noise < - 42 dB
•
Thermal EMF: < 0.1 µV/°C
•
Fast thermal stabilization
•
Rise time: 1 ns without ringing
•
A radiation test has been performed in the past on Vishay’s
Foil Resistors
•
Prototype samples available from 72 h
•
“R” level high reliability resistor qualified to MIL-PRF-55182/9
INTRODUCTION
The RNC90Y has been the benchmark for high precision
established reliability discrete resistors since 1982. In 2000,
Vishay achieved a technological breakthrough with the
introduction of the commercial ultra precision low TCR Z201
resistor. This breakthrough has now allowed Vishay to
introduce an established reliability “R” level very low TCR
resistor. The RNC90Z TCR limit of ± 2 ppm/°C over the
extended range of - 55 °C to + 175 °C is a significant
improvement over the existing RNC90Y specification.
The RNC90Z is a direct replacement for the RNC90Y.
FIGURE 1 - COMPARISON OF RNC90Y TO RNC90Z TEMPERATURE COEFFICIENT OF RESISTANCE
+ 1000
+ 1000
+ 1000
+ 1000
RNC90Y
RNC90Z
+ 400
+ 500
Δ
R/R (ppm)
Δ
R/R (ppm)
0
+ 160
0
- 160
+ 300
+ 200
- 200
- 300
- 400
- 500
- 1000
- 55
25
Temperature (
°
C)
125
- 1000
175
- 1000
- 55
- 1000
25
Temperature (
°
C)
125
175
Specification
±
5 ppm/
°
C
±
10 ppm/
°
C
Specification
±
2 ppm/
°
C
TABLE 1 - SPECIFICATIONS COMPARISON
SPECIFICATION
Temperature Coefficient of Resistance
Resistance Range
Failure Rate
Load-Life Stability
0.3 W at + 125 °C
at 2000 h
at 10 000 h
Voltage Coefficient
Working Voltage
Document Number: 63082
Revision: 25-Mar-10
MIL-PRF-55182/9
CHARACTERISTIC Y LIMITS
QUALIFIED RNC90Y
± 5 ppm/°C (- 55 °C to + 125 °C)
± 10 ppm/°C (+ 125 °C to + 175 °C)
4.99
Ω
to 121 kΩ
Level R
± 0.05 % maximum
ΔR
± 0.5 % maximum
ΔR
0.0005 %/V
300 V maximum
For any questions, contact:
foil@vishaypg.com
MIL-PRF-55182/9
CHARACTERISTIC Z LIMITS
QUALIFIED RNC90Z
± 2 ppm/°C (- 55 °C to + 175 °C)
± 2 ppm/°C (+ 125 °C to + 175 °C)
30.1
Ω
to 121 kΩ
Level R
± 0.05 % maximum
ΔR
± 0.5 % maximum
ΔR
0.0005 %/V
300 V maximum
www.foilresistors.com
1
Military and Space Established Reliability (ER)
Vishay Foil Resistors
TABLE 2 - MODEL SELECTION
MODEL NUMBER
RESISTANCE
RANGE
(Ω)
30.1
Ω
to 121 kΩ
STANDARD RESISTANCE
TOLERANCE
TIGHTEST %
± 0.005
LOOSEST %
± 1.0
R
FAILURE
RATE
AMBIENT
POWER RATING
at + 70 °C
0.6 W
at + 125° C
0.3 W
AVERAGE
WEIGHT
(g)
0.6
RNC90Z (RNC90S)
FIGURE 2 - IMPRINTING AND DIMENSIONS
RNC90Z Military Approved Resistors
L
VISHAY
18612
XXXX J
Manufacturers
Identification
Number
W
Resistance
Tolerance
Code
RNC90Z
100R01
B
R
Model Number
Resistance
Value Code
Failure Rate Code
(Not Present If
Non-Qualified)
LL
DIMENSIONS
INCHES
W: 0.105 ± 0.010
L: 0.300 ± 0.010
H: 0.326 ± 0.010
ST: 0.015 ± 0.005
SW: 0.040 ± 0.006
Rear View
MILLIMETERS
2.67 ± 0.25
7.62 ± 0.25
8.28 ± 0.25
0.381 ± 0.13
1.02 ± 0.13
25.4 ± 3.18
3.81 ± 0.13
H
Mfr. Code
B 01 11
Factory Year
Lead Material
#22 AWG
Jan Designator
(0.025 Dia.)
Week
(Not Present If
Solder Coated
LS
1)
Non-Qualified)
Copper
Front View
Side View
ST
SW
Note
1. 0.200" (5.08 mm) lead spacing available - specify RNC90S for RNC90Z
LL: 1.000 ± 0.125
LS: 0.150 ± 0.005
1)
FIGURE 3 - TRIMMING TO VALUES
(Conceptual Illustration)
FIGURE 4 - POWER DERATING CURVE
Percent of Rated Power
250
200
150
100
50
0
- 55 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150
Ambient Temperature °C
+ 70 °C
Interloop Capacitance
Reduction in Series
Current Path
Before Trimming
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Rated Power
Mutual Inductance
Reduction due
to Change in
Current Direction
+ 175
Note:
Foil shown in
black,
etched spaces in
white
TABLE 3 - RESISTANCE TOLERANCE
TOLERANCE
± 0.005 %
± 0.01 %
± 0.05 %
± 0.1 %
± 0.5 %
1)
± 1.0 %
1)
SYMBOL
V
T
A
B
D
F
TABLE 4 - FAILURE RATE LEVEL (FRL)
FRL
± 0.01 %
± 0.1 %
± 1.0 %
SYMBOL
R
P
M
Note
1. ± 0.5 % and ± 1.0 % resistors available only in standard values
per MIL-PRF-55182
www.foilresistors.com
2
For any questions, contact:
foil@vishaypg.com
Document Number: 63082
Revision: 25-Mar-10
Military and Space Established Reliability (ER)
Vishay Foil Resistors
TABLE 5 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y1189100R500AR0L (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
Ω
K
= kΩ
LIFE FAILURE RATE (LFR)
R
= ± 0.01 %
P
= ± 0.1 %
M
= ± 1.0 %
AER*
0
= standard
1 - 999
= custom
Y
1
1
8
9
1
0
0
R
5
0
0
A
R
0
L
PRODUCT CODE
1189
= RNC90Z
1506
= RNC90S
RESISTANCE TOLERANCE
V
= ± 0.005 %
T
= ± 0.01 %
A
= ± 0.05 %
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1.0 %
PACKAGING
L
= bulk pack
R
= tape and reel
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1189 100R500 A R 0 L:
TYPE: RNC90Z
VALUE: 100.5
Ω
ABSOLUTE TOLERANCE: ± 0.05 %
LIFE FAILURE RATE (LFR): ± 0.01 %
AER: standard
PACKAGING: bulk pack
HISTORICAL PART NUMBER: RNC90Z 100R50 A R B (will continue to be used)
RNC90Z
MODEL
RNC90Z
100R50
OHMIC VALUE
100.5
Ω
A
RESISTANCE
TOLERANCE
V
= ± 0.005 %
T
= ± 0.01 %
A
= ± 0.05 %
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1.0 %
R
LIFE FAILURE
RATE (LFR)
R
= ± 0.01 %
P
= ± 0.1 %
M
= ± 1.0 %
B
PACKAGING
B
= bulk pack
Note
* For non-standard requests, please contact application engineering.
CAGE #18612
“Commercial and Government Entity”
Formerly “FSCM”
Document Number: 63082
Revision: 25-Mar-10
For any questions, contact:
foil@vishaypg.com
www.foilresistors.com
3
Military and Space Established Reliability (ER)
Vishay Foil Resistors
The response of military and non military grade resistors to environmental stresses can be made better by “Improved
Performance Testing” (IPT). The IPT part will see burn-in and cycling that removes the “knee” from the normal drift of non IPT
parts. (See Table 6 for the improvement to expect in military parts when calling for Vishay recommended screening). Users
should be aware that IPT testing renders the part non QPL and so a 3XXXXX part number will be assigned by Vishay. Consult
Applications Engineering for details and ordering advice.
TABLE 6 - IMPROVED PERFORMANCE TESTING (NON-QPL APPROVED) VS. QPL
TEST
GROUP
I
TEST
Power Conditioning
Thermal Shock and
Overload Combined
II
Resistance Temperature
Characteristic
Low Temperature Storage
Low Temperature Operation
Terminal Strength
III
DWV
Insulation Resistance
Resistance to Soldering Heat
Moisture Resistance
IV
V
V (a)
V (b)
VI
VII
VIII
Shock
Vibration
Load Life at + 125 °C; 2000 h
Load Life at + 125 °C; 10 000 h
+ 85 °C Power Rating
+ 70 °C Power Rating
+ 25 °C Power Rating
Storage Life
High Temperature Exposure
Max. Allowance Reactance
Current Noise
Voltage Coefficient
Thermal EMF
4.8.23
4.8.10
4.8.11
4.8.12
4.8.13
4.8.14
4.8.15
4.8.16
4.8.17
4.8.18
4.8.18
-
4.8.18
-
-
4.8.19
-
-
4.8.20
-
-
± 0.05 %
± 0.05 %
± 0.02 %
± 0.02 %
10
4
MΩ
± 0.02 %
± 0.05 %
± 0.01 %
± 0.02 %
± 0.05 %
± 0.5 %
-
± 0.05 %
-
-
± 0.5 %
-
-
0.0005 %/V
(5 ppm/V)
-
not done
4.8.2
4.8.3
4.8.9
RNC90Z
MIL-PRF-55182/9
METHOD PARAGRAPH
LIMITS
-
± 0.05 %
± 0.05 %
± 2 ppm/°C
VISHAY
IMPROVED PERFORMANCE
TESTING
(IPT) LIMITS
± 0.0025 %
± 0.0025 %
± 0.0025 %
< ± 2 ppm/°C
(- 55 °C to + 125 °C)
(Can be sorted for tighter tracking)
± 0.0025 %
± 0.0025 %
± 0.001 %
± 0.001 %
> 10
4
MΩ
± 0.001 %
± 0.015 %
± 0.0025 %
± 0.0025 %
± 0.005 % (50 ppm)
± 0.015 % (150 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.0025 %
± 0.005 %
<1%
< - 32 dB
< 0.00001 %/V
(< 0.1 ppm/V)
0.1 µV/°C
FIGURE 4 - IPT IMPRINTING AND DIMENSIONS
in inches (millimeters)
Front View
0.300 ± 0.010
(7.62 ± 0.25)
VISHAY
XXXX
3XXXXX
Date Code
01
10
Year Week
0.015 ± 0.005
(0.381 ± 0.13)
Model Number
0.150 ± 0.005
(3.81 ± 0.13)
Lead Material
#22 AWG
(0.025 Dia.)
Solder Coated
Copper
0.040 ± 0.005
(1.02 ± 0.13)
Side View
0.105 ± 0.010
(2.67 ± 0.25)
Rear View
Optional
Customer P/N
6 Digits Maximum
Resistance
Value Code
Tolerance
1.00 ± 0.125
(25.4 ± 3.18)
0.326 ± 0.010
(8.28 ± 0.25)
XXXXXX
100R01
0.01 %
www.foilresistors.com
4
For any questions, contact:
foil@vishaypg.com
Document Number: 63082
Revision: 25-Mar-10
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase.
To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
