-
1. Principle 1. Infrared emission protocol There are many infrared communication protocols. This experiment uses the NEC protocol. This protocol uses PWM modulation and uses pulse width to represen...[Details]
-
Today, under the guidance of a low-level expert, I learned how to configure the PWM module! Woof! First open the file configured last time, as follows: Then, we need to use TIM1 to set PWM: Then,...[Details]
-
Artificial Intelligence (AI) is undoubtedly the hottest topic in the technology industry in the past one or two years. In addition to the huge investments made by technology giants, financial and o...[Details]
-
Superconductors have physical properties such as zero resistance effect, Meissner effect and Josephson effect, which make them have broad application prospects and unparalleled advantages in many b...[Details]
-
Analysts have sorted out some interesting phenomena. Let's follow the embedded editor to learn about the relevant content.
Huawei emerged as a star in the all-
flash
array sales ra...[Details]
-
With the large-scale development of the domestic household photovoltaic market and the improvement of component and inverter technology, the system cost has dropped significantly in the past year. The...[Details]
-
On May 16, in response to
the public opinion storm caused by
Lenovo's
"
5G
voting" incident,
Lenovo
Holdings Chairman and
Lenovo
Group Founder Liu Chuanzhi, Lenovo Gr...[Details]
-
1. Function and purpose There are two pins BOOT0 and BOOT1 on each STM32 chip. The level status of these two pins when the chip is reset determines which area the program starts from after th...[Details]
-
#include reg52.h #define PORTLEN P0 sbit bit_select = P2^0; sbit seg_select = P2^1; unsigned char src = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f ,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71}; unsigne...[Details]
-
Recently, the National Development and Reform Commission announced that all foreign equity restrictions in the automobile industry will be lifted in the next five years. At the same time, as subsid...[Details]
-
#include "myuart.h" #include "avr/io.h" #include #define UDRE 5 #define RXEN 4 #define TXEN 3 #define UCSZ0 1 #define RXC 7 #define RXCIE 7 ISR(USART0_RX_vect)//接收中断 { unsigned char...[Details]
-
#include avr/io.h #include util/delay.h #include avr/interrupt.h //Interrupt function header file //Function declaration void Port_Init(void); //Port initialization configuration void Comp...[Details]
-
#include #include #define RXB8 1 #define TXB8 0 #define UPE #define OVR 3 #define FE 4 #define UDRE 5 #define RXC 7 #define FRAMING_ERROR (1 FE) #define PARITY_ERROR (1 UPE) #define DATA_OVERRUN ...[Details]
-
Mobile phone battery charger program made by STC12C2052AD microcontroller #include stc12c2052ad.h #include intrins.h #define uchar unsigned char #define uint unsigned int sbit REF =P1^0; sbi...[Details]
-
;The chip is EM78P153 ;P64, P65 are connected to the crystal oscillator, the oscillation mode is 4MHz crystal oscillator ; Watchdog off, instruction cycle is 2 CLOCK, P63 is reset pin ;**************...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
