EEWORLDEEWORLDEEWORLD

Part Number

Search

MB2461A2G03-FC

Description
Pushbutton Switch, DPDT, On-(on), Momentary, Solder Terminal, Through Hole-straight
CategoryMechanical and electronic products    switch   
File Size230KB,6 Pages
ManufacturerNKK Switches
Environmental Compliance  
Download Datasheet Parametric View All

MB2461A2G03-FC Overview

Pushbutton Switch, DPDT, On-(on), Momentary, Solder Terminal, Through Hole-straight

MB2461A2G03-FC Parametric

Parameter NameAttribute value
Is it lead-free?Lead free
Is it Rohs certified?conform to
Reach Compliance Codenot_compliant
ECCN codeEAR99
Actuator length0.218 inch
Actuator stroke0.9906 mm
Actuator typePUSHBUTTON
body width12.7 mm
body height29.4132 mm
Body length or diameter13.0048 mm
Casing diameter0.244 inch
Nozzle length0.28 inch
center contact materialCOPPER
Center contact platingGOLD
Contact (DC) maximum rated power R load0.4VA@28VDC
Contact functionON-(ON)
Contact resistance0.03 mΩ
Electrical life100000 Cycle(s)
End contact platingGOLD
Insulation resistance1000000000 Ω
insulator materialDIALLYL PHTHALATE
JESD-609 codee4
Manufacturer's serial numberMB2400
Installation featuresTHROUGH HOLE-STRAIGHT
Maximum operating temperature70 °C
Minimum operating temperature-15 °C
sealEPOXY
SolderabilityWAVE
surface mountNO
Switch actionMOMENTARY
switch functionDPDT
Switch typePUSHBUTTON SWITCH
Terminal surfaceGOLD OVER NICKEL/SILVER
Terminal length0.25 inch
Termination typeSOLDER
Series MB2400
Toggles
Snap-Action Pushbuttons
General
Specifications
Electrical Capacity (Resistive Load)
Power Level (silver):
Logic Level (gold):
Logic/Power Level:
(gold over silver)
Rockers
Pushbuttons
C
3A @ 125V AC
0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines silver & gold ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
Other Ratings
Programmable Illuminated PB
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Travel
20 milliohms maximum for silver; 30 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
200,000 operations minimum
25,000 operations minimum for silver; 100,000 operations minimum for gold
Single pole 2.45N; double pole 3.92N
Pretravel .024” (0.6mm); Overtravel .016” (0.4mm); Total Travel .039” (1.0mm)
Keylocks
Materials & Finishes
Plunger:
Bushing:
Frame:
Case:
Base:
Movable Contactor:
Movable Contacts:
Stationary Contacts:
Terminals:
Slides
Brass with nickel plating
Brass with nickel plating
Stainless steel
Polybutylene terephthalate (PBT) (UL94V-0)
Diallyl phthalate resin (UL94V-0)
Phosphor bronze with silver or gold plating
Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A)
Silver alloy with silver plating (code W); copper or brass with gold plating (code G); or
silver with gold plating (code A)
Copper or brass with silver plating; copper or brass with gold plating
Rotaries
Environmental Data
Tactiles
Operating Temp Range:
Humidity:
Vibration:
Shock:
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 3 shocks in each direction)
Tilt
Installation
Touch
Mounting Torque:
Cap Installation Force:
Soldering:
Cleaning:
Indicators
1.5Nm (13.0 lb
in) for double nut; 0.7Nm (6.0 lb
in) for single nut
80.0N (18.0 lbf) maximum downward force on actuator
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
See Cleaning Specifications in Supplement section.
Standards & Certifications
Flammability Standards:
UL:
CSA:
Supplement
UL94V-0 case & base
File No. E44145 - Recognized only when ordered with marking on switch.
Add “/U” or “/CUL” before dash in part number to order UL recognized switch.
All single and double pole models recognized at 3A @ 125V AC or 0.4VA max. @ 28V DC max.
File No. 023535_0_000 - Certified only when ordered with marking on switch.
Add “/C” before dash in part number to order CSA certified switch.
Single pole models with PC, solder lug, or Wirewrap terminals & double pole with PC or
Wirewrap terminals certified at 3A @ 125V AC or 0.4VA @ 28V maximum.
Accessories
C96
www.nkk.com
I would like to ask what is the KEYMAN tool
When the device has no ActiveSync connection to the Visual Studio machine, but has a valid TCP connection, the deployment does not work. Solution: Use the separately provided Keyman tool to perform th...
sanoboy Embedded System
I saw in the news today that an ATM in Kunming, Yunnan, gave out 4,000 yuan when a person withdrew 400 yuan, and the bank urged citizens to pay back the money.
Some netizens called for: Brothers who have taken too much money, please note that the money must be returned. We don’t say whether it is illegal or not, nor do we say how others treated us before, at...
eeleader Talking
How to turn off the LCD backlight at a certain time? Please give me some advice.
I use winCE5.0 ARM9 core, and the application is developed with EVC4.0. I set a time value (e.g. 5S) through the application (set.exe), and then close the set.exe program immediately after setting. If...
yjk000 Embedded System
Come and criticize me! A transistor can replace a diode, right? Why can't it be used here?
[i=s]This post was last edited by Baboerben on 2022-4-20 16:33[/i]I don't have 1n5822 on hand, and I'm in a hurry to do the experiment. I use a transistor to replace the diode at 5822 as shown in the ...
灞波儿奔 Power technology
How long is the transmission line?
[p=16, null, left][color=rgb(0, 0, 0)][font=Arial, Helvetica, sans-serif, 宋体][size=12px]This is related to the propagation speed of the signal. The signal speed in the copper line on the FR4 board is ...
wstt PCB Design
TI wants to subvert nine major analog technology applications
TI has clearly demonstrated strong capabilities in many of the areas it mentioned, bringing various components, application notes, software, reference designs, evaluation products, large revenues, etc...
qwqwqw2088 Analogue and Mixed Signal

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1647  2920  1721  2058  169  34  59  35  42  4 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号