• Bidirectional/differential data strobe per byte of
data (DQS/DQS#)
• Programmable READ and WRITE latencies (RL/WL)
• Programmable burst lengths: 4, 8, or 16
• Per-bank refresh for concurrent operation
• On-chip temperature sensor to control self refresh
rate
• Partial-array self refresh (PASR)
• Deep power-down mode (DPD)
• Selectable output drive strength (DS)
• Clock stop capability
• RoHS-compliant, “green” packaging
Table 1: Key Timing Parameters
Speed
Grade
-18
2
-25
-3
Clock
Rate
(MHz)
533
400
333
Data Rate
(Mb/s/pin) RL WL
1066
800
667
8
6
5
4
3
2
Options
• V
DD2
: 1.2V
• Configuration
– 16 Meg x 16 x 8 banks x 1 die
– 8 Meg x 32 x 8 banks x 1 die
– 8 Meg x 32 x 8 banks x 2 die
– 16 Meg x 16 x 8 banks x 4 die
– 8 Meg x 32 x 8 banks x 2 die
– 8 Meg x 32 x 8 banks x 3 die
– 8 Meg x 32 x 8 banks x 4 die
– 16 Meg x 16 x 8 banks x 2 die +
8 Meg x 32 x 8 banks x 1 die
• Device type
– LPDDR2-S4, 1 die in package
– LPDDR2-S4, 2 die in package
– LPDDR2-S4, 3 die in package
– LPDDR2-S4, 4 die in package
• FBGA“green” package
– 134-ball FBGA (11mm x 11.5mm)
– 134-ball FBGA (11.5mm x 11.5mm)
– 168-ball FBGA (12mm x 12mm)
– 168-ball FBGA (12mm x 12mm)
– 168-ball FBGA (12mm x 12mm)
– 216-ball FBGA (12mm x 12mm)
– 216-ball FBGA (12mm x 12mm)
– 216-ball FBGA (12mm x 12mm)
– 220-ball FBGA (14mm x 14mm)
– 220-ball FBGA (14mm x 14mm)
• Timing – cycle time
– 1.875ns @ RL = 8
– 2.5ns @ RL = 6
– 3.0ns @ RL = 5
• Operating temperature range
– From –25°C to +85°C
– From –40°C to +105°C
• Revision
Notes:
Marking
L
128M16
64M32
128M32
256M32
64M64
96M64
128M64
192M32
D1
D2
D3
D4
MH
MG
KL
LE
KP
KH
KJ
KU
MP
LD
-18
2
-25
-3
IT
AT
:A
t
RCD/
t
RP
1
Typical
Typical
Typical
1. For fast
t
RCD/
t
RP, contact factory.
2. For -18 speed grade, contact factory.
PDF: 09005aef83f3f2eb
2gb_mobile_lpddr2_s4_g69a.pdf – Rev. N 3/12 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
2010 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
2Gb: x16, x32 Mobile LPDDR2 SDRAM S4
Features
Table 2: Single Channel S4 Configuration Addressing
128 Meg x 16
Figure 3
(page 16)
CS0#
CS1#
Row addressing
Column ad-
dressing
Number of die
Die per
rank (CS#)
Ranks per
channel
1
CS0#
CS1#
CS0#
CS1#
16 Meg x 16 x 8
banks
na
16K (A[13:0])
1K (A[9:0])
na
1
1
0
1
64 Meg x 32
Figure 3
(page 16)
8 Meg x 32 x 8
banks
na
16K (A[13:0])
512 (A[8:0])
na
1
1
0
1
128 Meg x 32
Figure 4
(page 17)
8 Meg x 32 x 8
banks
8 Meg x 32 x 8
banks
16K (A[13:0])
512 (A[8:0])
512 (A[8:0])
2
1
1
2
192 Meg x 32
Figure 6
(page 19)
16 Meg x 16 x 8
banks x 2
8 Meg x 32 x 8
banks
16K (A[13:0])
1K (A[9:0])
512 (A[8:0])
3
2
1
2
256 Meg x 32
Figure 9
(page 22)
16 Meg x 16 x 8
banks x 2
16 Meg x 16 x 8
banks x 2
16K (A[13:0])
1K (A[9:0])
1K (A[9:0])
4
2
2
2
Architecture
Die configu-
ration
Table 3: Dual Channel S4 Configuration Addressing
Architecture
Die configuration
Row addressing
Column
addressing
Number of die
Die per
rank (CS#)
Ranks per
channel
1
Note:
CS0#
CS1#
Channel A
Channel B
CS0#
CS1#
64 Meg x 64
Figure 5 (page 18)
8 Meg x 32 x 8 banks
16K (A[13:0])
512 (A[8:0])
na
2
1
0
1
1
96 Meg x 64
Figure 8 (page 21)
8 Meg x 32 x 8 banks
16K (A[13:0])
512 (A[8:0])
512 (A[8:0])
3
1
1-chan A, 0-chan B
2
1
128 Meg x 64
Figure 7 (page 20)
8 Meg x 32 x 8 banks
16K (A[13:0])
512 (A[8:0])
512 (A[8:0])
4
1
1
2
2
1. A channel is a complete LPDRAM interface, including command/address and data pins.
See Package Block Diagrams (page 16) for descriptions of signal connections and die configurations for each re-
spective architecture.
PDF: 09005aef83f3f2eb
2gb_mobile_lpddr2_s4_g69a.pdf – Rev. N 3/12 EN
2
Micron Technology, Inc. reserves the right to change products or specifications without notice.
2010 Micron Technology, Inc. All rights reserved.
2Gb: x16, x32 Mobile LPDDR2 SDRAM S4
Features
Part Numbering
Figure 1: 2Gb LPDDR2 Part Numbering
MT
Micron Technology
Product Family
42 = Mobile LPDDR2 SDRAM
42
L
128M16 D1
KL
-25
IT
:A
Design Revision
:A = First generation
Operating Temperature
IT = –25°C to +85°C
AT = –40°C to +105°C
Operating Voltage
L = 1.2V
Cycle Time
Configuration
128M16 = 128 Meg x 16
64M32 = 64 Meg x 32
128M32 = 128 Meg x 32
256M32 = 256 Meg x 32
192M32 = 192 Meg x 32
64M64 = 64 Meg x 64
96M64 = 96 Meg x 64
128M64 = 128 Meg x 64
Package Codes
MH = 134-ball FBGA, 11mm x 11.5mm
MG = 134-ball FBGA, 11.5mm x 11.5mm
KL, KP, LE = 168-ball FBGA, 12mm x 12mm
KH, KJ, KU = 216-ball FBGA, 12mm x 12mm
LD, MP = 220-ball FBGA, 14mm x 14mm
-18 = 1.8ns,
t
CK RL = 8
t
-25 = 2.5ns,CK RL = 6
t
-3 = 3.0ns,CK RL = 5
Addressing
D1 = LPDDR2, 1 die
D2 = LPDDR2, 2 die
D3 = LPDDR2, 3 die
D4 = LPDDR2, 4 die
FBGA Part Marking Decoder
Due to space limitations, FBGA-packaged components have an abbreviated part marking that is different from the
part number. Micron’s FBGA part marking decoder is available at
www.micron.com/decoder.
In timing diagrams, “CMD” is used as an indicator only. Actual signals occur on CA[9:0].
V
REF
indicates V
REFCA
and V
REFDQ
.
PDF: 09005aef83f3f2eb
2gb_mobile_lpddr2_s4_g69a.pdf – Rev. N 3/12 EN
3
Micron Technology, Inc. reserves the right to change products or specifications without notice.
2010 Micron Technology, Inc. All rights reserved.
2Gb: x16, x32 Mobile LPDDR2 SDRAM S4
Features
Contents
General Description ....................................................................................................................................... 11
General Notes ............................................................................................................................................ 11
Write Data Mask ............................................................................................................................................. 67
READ Burst Followed by PRECHARGE ......................................................................................................... 69
WRITE Burst Followed by PRECHARGE ....................................................................................................... 70
Auto Precharge ........................................................................................................................................... 71
READ Burst with Auto Precharge ................................................................................................................. 71
WRITE Burst with Auto Precharge ............................................................................................................... 72
Temperature Sensor ................................................................................................................................... 87
Deep Power-Down ........................................................................................................................................ 101
Input Clock Frequency Changes and Stop Events ............................................................................................ 102
Input Clock Frequency Changes and Clock Stop with CKE LOW .................................................................. 102
Input Clock Frequency Changes and Clock Stop with CKE HIGH ................................................................. 103
NO OPERATION Command ........................................................................................................................... 103
Simplified Bus Interface State Diagram ....................................................................................................... 103
Truth Tables .................................................................................................................................................. 105
Input Signal .............................................................................................................................................. 121
AC and DC Logic Input Measurement Levels for Differential Signals ................................................................ 123
Single-Ended Requirements for Differential Signals .................................................................................... 124
Differential Input Crosspoint Voltage ......................................................................................................... 126
Clock Period Jitter .......................................................................................................................................... 138
Clock Period Jitter Effects on Core Timing Parameters ................................................................................. 138
Cycle Time Derating for Core Timing Parameters ........................................................................................ 139
Clock Cycle Derating for Core Timing Parameters ....................................................................................... 139
Clock Jitter Effects on Command/Address Timing Parameters ..................................................................... 139
Clock Jitter Effects on READ Timing Parameters .......................................................................................... 139
Clock Jitter Effects on WRITE Timing Parameters ........................................................................................ 140
AC Timing ..................................................................................................................................................... 142
CA and CS# Setup, Hold, and Derating ........................................................................................................... 149
Data Setup, Hold, and Slew Rate Derating ....................................................................................................... 156
Revision History ............................................................................................................................................ 163
Rev. N, Production – 3/12 ........................................................................................................................... 163
Rev. M, Production – 10/11 ........................................................................................................................ 163
Rev. L, Production – 09/11 .......................................................................................................................... 163
Rev. K, Production – 08/11 ......................................................................................................................... 163
Rev. J, Production – 05/11 .......................................................................................................................... 163
Rev. H, Production – 3/11 ........................................................................................................................... 163
Rev. G, Production – 1/11 ........................................................................................................................... 163
[code] --When a group of data arrives, it is required to detect the two bytes 55 and AA, and then save the N bytes after the two bytes--After I detect the two data 55 and aa in this program, I pull up...
I'm learning Huaheng ARM9 recently, and I'm using Samsung S3C2410. When I was dealing with the interrupt problem, I encountered a problem. I'd like to ask for your help. The problems are as follows: 1...
I want to learn about TPMS system. Please give me some advice. I am a rookie. I am very curious about this project and want to learn it. I don’t know a lot of knowledge. I can say that I have no exper...
Dear experts, I would like to ask you a question: After I wrote to the local terminal through BAR2 of 9054 (successfully), the base address of BAR2 changed from E2020000 to E2000000 (and BAR3 changed ...
PV DC fuses are safety devices used to protect PV panels, inverters, and DC loads. To ensure their safety and reliability, they must be UL248 certified.
Before applying for UL248 certifi...[Details]
Dual-mode inverters can operate both in conjunction with the grid and independently. These inverters can inject excess energy from renewable energy and storage devices into the grid, and withdraw p...[Details]
On August 24th, Jin Yuzhi, CEO of Huawei's Intelligent Automotive Solutions BU, announced the first automotive application of Huawei Qiankun's unique Limera technology. This technology eliminates t...[Details]
Electric vehicles are currently gaining momentum, but this is just a facade. Fuel-powered vehicles remain unchallenged. While electric vehicles boast unique advantages in environmental emissions an...[Details]
summary
There are multiple approaches to making industrial systems more intelligent, including applying artificial intelligence (AI) technology at the edge and in the cloud to sensor...[Details]
With the rapid advancement of automation technology, collaboration between robots is no longer just science fiction. Imagine dozens of machines moving goods in a warehouse without interfering with ...[Details]
As AI accelerates across industries, the demand for data center infrastructure is also growing rapidly.
Keysight Technologies, in collaboration with Heavy Reading, released the "Beyo...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
In daily life, power transformers have different functions and uses due to different usage scenarios. The most common ones can be divided into: control transformers, isolation transformers, rectifi...[Details]
Renesas Electronics' new ultra-low-power RA4C1 MCU features advanced security and a dedicated peripheral set, making it ideal for metering and other applications.
The new product mee...[Details]
In this final installment of a five-part blog series, I will discuss noise in op amps driving headphone loads and some techniques for reducing it. Previous posts have discussed headphone load power...[Details]
Nidec Precision Testing Technology Co., Ltd. will participate in "Testing Expo China—Automotive 2025" to be held at the Shanghai World Expo Exhibition and Convention Center from August 27 (Wednesda...[Details]
With the development of vehicle technology, there are more types of cars. Cars are divided into hybrid, pure electric vehicles, and fuel vehicles. For hybrid cars, they are divided into plug-in hyb...[Details]
When it comes to batteries, they're no strangers to car owners. But how should batteries be maintained? How often should they be replaced? What bad habits can affect their lifespan? And what's the ...[Details]
Keysight Technologies reported strong third-quarter results, with revenue and earnings per share exceeding expectations and steady order growth. The company, driven by strong growth across multiple...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
