Series 112, 113, & 114
Deci-Center
™
Jumpers
FEATURES:
• Aries offers a wide array of DIP jumper configurations and
wiring possibilities for all your programming needs.
• Reliable, electronically tested solder connections.
• DIP-end cable is potted to provide strain relief.
• Protective covers are also provided on header.
• Pitch bars help maintain .100 [2.54] conductor spacing.
• 10-color cable allows for easy identification and tracing.
• Consult factory for jumper lengths under 3.000 [76.20].
SPECIFICATIONS:
• Header body and pitch bar are red UL 94-HB Glass-filled
Nylon. Consult factory for UL 94V-0 rated material.
• Header pins are Brass, 1/2 hard.
• Pin plating is 10µ [.25µm] min. Gold per MIL-G-45204 over
50µ [1.27µm] min. Nickel per QQ-N-290.
• Cable insulation is UL Style 2697 Polyvinyl Chloride (PVC).
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
• Cable laminate is clear PVC, self-extinguishing.**
configurations can be furnished, depending on quantities. Aries reserves the
• .050 [1.27] pitch conductors are 28 AWG, 7/36 strand,
right to change product specifications without notice.
Tinned Copper per ASTM B 33 (.039 [.99] pitch conductors
ORDERING INFORMATION
are 26 AWG, 7/34 strand).
• Cable current rating=1 Amp @ 10°C [50°F] above ambient.
XX-XXX-XXX
• Cable voltage rating=300 Volts.
• Cable temperature rating=176°F [80°C].
No. of conductors
Jumper series:
• Cable capacitance=13.0 pf/ft. [42.7pf/meter] nominal
(see table)
112, 113, 114
@1 MHz.**
112X, 113X, 114X
• Crosstalk: 10’ sample, 5 ns rise time with 2 lines
Cable length in inches:
(see Data Sheet
driven. Near end=4.7%; Far end=4.3% nominal.**
EX: 3” = -003-/ 3.5 = -003.5-
No. 11009 for
• Propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal.**
min. length =3” [76.20mm]
wiring table)
•Insulation resistance=1010 Ohms (10 ft. [3 meters] min.).
**Note: Applies to .050 [1.27] pitch cable only.
A
LL DIMENSIONS
:
INCHES
[
MILLIMETERS
]
MOUNTING CONSIDERATIONS:
•Suggested PCB hole size=.033 ± .002 [.86 ± .05].
“X”=(NO. OF CONDUCTORS - 1) X .100 [2.54]
“L” ± .125
All tolerances ± .005 [.13]
unless otherwise specified
Centers “C ”
.300 [7.62]
.400 [10.16]
.600 [15.24]
Dim. “D ”
.395 [10.03]
.495 [12.57]
.695 [17.65]
Available Sizes
4 thru 20
22
24, 28, 40
Numbers
shown pin
side for
reference
only.
See Data Sheet No.
11009 for other
configurations and
additional information.
SERIES 112
NORTH AMERICA
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX: (908) 996-3891
UK/IRELAND/GB
TEL: +44 870 240 0249
FAX: +44 1653 690980
uking@arieselec.com
EUROPE/MAINLAND/HOLLAND
TEL: +31 78 615 94 65
FAX: +31 78 615 43 11
11008
europe@arieselec.com
REV.C
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
http://www.arieselec.com • info@arieselec.com
ARM Technology
京公网安备 11010802033920号
EEWORLD
