60W AC-DC Single Output Desktop
Features :
Universal AC input / Full range
3 pole AC inlet IEC320-C14
GS60
series
Protections: Short circuit / Overload / Over voltage/ Over temperature
Fully enclosed plastic case
Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE
Class
power ( with earth pin)
Pass LPS
LED indicator for power on
No load power consumption<0.3W
Meet EISA 2007(Energy Independence and Security Act)
2 years warranty
SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER (max.)
OUTPUT
VOLTAGE TOLERANCE
Note.4
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note. 6)
EMC EMISSION
EMC IMMUNITY
OTHERS
MTBF
DIMENSION
PACKING
PLUG
CABLE
Note.5
(except for 48V)
TUV
Rheinland
Product Safety
geprUfre
Sicherheit
GS60A05-P1J GS60A07-P1J GS60A09-P1J GS60A12-P1J GS60A15-P1J GS60A18-P1J GS60A24-P1J GS60A48-P1J
GS60A05
Note.2
5V
GS60A07
7.5V
6A
0 ~ 6A
45W
100mVp-p
5.0%
1.0%
5.0%
GS60A09
9V
6A
0 ~ 6A
54W
100mVp-p
5.0%
1.0%
5.0%
GS60A12
12V
5A
0 ~ 5A
60W
100mVp-p
3.0%
1.0%
3.0%
GS60A15
15V
4A
0 ~ 4A
60W
100mVp-p
3.0%
1.0%
3.0%
GS60A18
18V
3.33A
0 ~ 3.33A
60W
150mVp-p
3.0%
1.0%
3.0%
GS60A24
24V
2.5A
0 ~ 2.5A
60W
180mVp-p
3.0%
1.0%
3.0%
GS60A48
48V
1.25A
0 ~ 1.25A
60W
240mVp-p
2.5%
1.0%
2.5%
6A
0 ~ 6A
30W
5.0%
1.0%
5.0%
RIPPLE & NOISE (max.)
Note.3
100mVp-p
Note.7
1000ms, 30ms / 230VAC
1000ms, 30ms / 115VAC at full load
50ms / 230VAC
15ms / 115VAC at full load
90 ~ 264VAC 135 ~ 370VDC
47 ~ 63Hz
81%
1.4A / 115VAC
65A / 230VAC
0.75mA / 240VAC
105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
5.25 ~ 6.75V
7.88 ~ 10.13V 9.45 ~ 12.15V 12.6 ~ 16.2V 15.75 ~ 20.25V 18.9 ~ 24.3V
Protection type : Shut down o/p voltage, re-power on to recover
RTH2 > 70
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +50 (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-40 ~ +85
, 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1, BSMI CNS14336,
J60950-1(except for 48V)
approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
711Khrs min. MIL-HDBK-217F(25 )
125*50*31.5mm (L*W*H)
0.305Kg; 40pcs/13.02Kg/1.05CUFT
Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested
See page 2 ; Other type available by customer requested
85.5%
1A / 230VAC
87.5%
88%
88.5%
88.5%
90%
92%
25.2 ~ 32.4V
50.4 ~ 64.8V
CONNECTOR
NOTE
1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2. DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4. Tolerance: includes set up tolerance, line regulation, load regulation.
5. Line regulation is measured from low line to high line at rated load.
6. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives.
7. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:GS60-SPEC 2011-06-15
京公网安备 11010802033920号
EEWORLD
