Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications.
2.
Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured.
3.
Mechanical drawings and specifications are for reference only.
4
. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified.
5.
Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release.
6.
This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this
datasheet
.
7.
Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
There is a K120S that uses COM1 port (i.e. 485 port on the side) to communicate with the temperature controller. It uses MODBUS ASCII protocol. It uses MODCOM command to read the temperature of the te...
I just started to look at Mobile recently, and I found that I didn't see the MBR of Mobile. I didn't find any obvious code for formatting and creating MBR in the bootloader. I am very confused, but th...
Hello everyone, I want to write a multi-channel AD sampling program recently, but I have no idea. Please give me some advice. I am using a 51 microcontroller with AD conversion, but there is only one ...
When using TLC2543 for AD conversion, if the voltage is measured, should a bypass circuit be added before the analog input channel to remove interference? If so, how should this circuit be connected?...
I don't know why my post disappeared. There are too many embedded training institutions now. Can you comment on Suqian? Does anyone know what Suqian institution is like?...