A67L16181/A67L06361 Series
2M X 18, 1M X 36 LVTTL, Flow-through ZeBL
TM
SRAM
Features
Fast access time: 6.5/7.5/8.5 ns
(153, 133, 117 MHz)
Zero Bus Latency between READ and WRITE cycles
allows 100% bus utilization
Signal +3.3V
±
5% power supply
Individual Byte Write control capability
Clock enable (
CEN
) pin to enable clock and suspend
operations
Clock-controlled and registered address, data and control
signals
Registered output for pipelined applications
Three separate chip enables allow wide range of options
for CE control, address pipelining
Internally self-timed write cycle
Selectable BURST mode (Linear or Interleaved)
SLEEP mode (ZZ pin) provided
Available in 100 pin LQFP package
Industrial operating temperature range: -25°C to +85°C
for -I series
All Pb-free (Lead-free) products are RoHS compliant
General Description
The AMIC Zero Bus Latency (ZeBL
TM
) SRAM family employs
high-speed, low-power CMOS designs using an advanced
CMOS process.
The A67L16181, A67L06361 SRAMs integrate a 2M X 18,
1M X 36 SRAM core with advanced synchronous peripheral
circuitry and a 2-bit burst counter. These SRAMs are
optimized for 100 percent bus utilization without the insertion
of any wait cycles during Write-Read alternation. The positive
edge triggered single clock input (CLK) controls all
synchronous inputs passing through the registers. The
synchronous inputs include all address, all data inputs, active
low chip enable (
CE
), two additional chip enables for easy
depth expansion (CE2,
CE2
), cycle start input (ADV/
LD
),
synchronous clock enable (
CEN
), byte write enables
(
BW1
,
BW2
,
BW3
,
BW4
) and read/write (R/
W
).
Asynchronous inputs include the output enable (
OE
), clock
(CLK), SLEEP mode (ZZ, tied LOW if unused) and burst
mode (MODE). Burst Mode can provide either interleaved or
linear operation, burst operation can be initiated by
synchronous address Advance/Load (ADV/
LD
) pin in Low
state. Subsequent burst address can be internally generated
by the chip and controlled by the same input pin ADV/
LD
in
High state.
Write cycles are internally self-time and synchronous with the
rising edge of the clock input and when R/
W
is Low. The
feature simplified the write interface. Individual Byte enables
allow individual bytes to be written.
BW1
controls I/Oa pins;
BW2
controls I/Ob pins;
BW3
controls I/Oc pins; and
BW4
controls I/Od pins. Cycle types can only be defined when an
address is loaded.
The SRAM operates from a +3.3V power supply, and all
inputs and outputs are LVTTL-compatible. The device is
ideally suited for high bandwidth utilization systems.
(April, 2008, Version 1.0)
2
AMIC Technology, Corp.
京公网安备 11010802033920号
EEWORLD
