Results in economical use of duct space and facilitates
installation
Corrugated steel tape armor
Provides rodent resistance for direct-buried applications
Innovative waterblocking technology
Eliminates the need for traditional flooding compound
and provides efficient and craft-friendly cable preparation
Medium-density polyethylene jacket
Rugged, durable and easy to strip (while providing supe-
rior protection against UV radiation, fungus, abrasion and
other environmental factors)
Corning ALTOS
®
RD Lite™ single-jacket, single-armored
cables are rugged, armored cables with a reduced diam-
eter designed for direct-buried, duct and aerial (lashed)
installation. The loose tube design provides stable perfor-
mance over a wide temperature range and is compatible
with any telecommunications-grade optical fiber.
Standards
Design and Test Criteria
ANSI/ICEA S-87-640
Telcordia GR-20
RDUP PE-90
ALTOS RD Lite Single-Jacket, Single-Armored
Cables, 300 Fibers
| Photo PIM1392
Family Spec Sheet 0036_NAFTA_AEN
Page 1 | Revision date 2014-08-08
ALTOS RD Lite Single-Jacket, Single-Armored
Cables, 432 Fibers
| Photo PIM1402
ALTOS
®
RD Lite™ Cables, Single-Jacket,
Single-Armored, 300-432 Fibers
Polyethylene (PE)
Outer Jacket
Ripcord
Water-Swellable
Tape
Dielectric Central
Element
Buffer
Tube
Fiber
Water-Swellable
Tape
Filling Element
Water-Swellable
Tape
Corrugated Steel
Armor
Polyethylene (PE)
Outer Jacket
Ripcord
Water-Swellable
Tape
Dielectric Central
Element
Buffer
Tube
Fiber
Water-Swellable
Tape
Water-Swellable
Tape
Corrugated Steel
Armor
ALTOS RD Lite Single-Jacket, Single-Armored
Cables, 300 Fibers
| Photo PIM2290
ALTOS RD Lite Single-Jacket, Single-Armored
Cables, 432 Fibers
| Photo PIM2300
Specifications
Temperature Range
Storage
Installation
Operation
-40 °C to 70 °C (-40 °F to 158 °F)
-30 °C to 70 °C (-22 °F to 158 °F)
-40 °C to 70 °C (-40 °F to 158 °F)
*
Note: Corning recommends storing cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation tempera-
ture range specifications for best installation results.
Max. Tensile Strength, Short-Term
Max. Tensile Strength, Long-Term
2700 N (600 lbf)
890 N (200 lbf)
Mechanical Characteristics Cable
Fiber Count Product
Type
300 - 432
Armored
Maximum
Fibers per
Tube
12
Number of
Tube Posi-
tions
36
Number
of Active
Tubes
25 - 36
Weight
Nominal
Outer Dia-
meter
23 mm
(0.91 in)
Min. Bend
Radius
Installation
348 mm
(13.7 in)
Min. Bend
Radius
Operation
232 mm
(9.1 in)
437 kg/km
(291 lb/1000 ft)
*
Tubes 13 to 24 include a co-extruded stripe that is white for the black tube and black for all other tube colors.
*
Tubes 25 to 36 include a co-extruded stripe that is white for the red tube and red for all other tube colors.
Family Spec Sheet 0036_NAFTA_AEN
Page 2 | Revision date 2014-08-08
ALTOS
®
RD Lite™ Cables, Single-Jacket,
Single-Armored, 300-432 Fibers
Chemical Characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Transmission Performance
Multimode
Fiber Core Diameter
(
µm
)
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
(
nm
)
Maximum Attenuation
(
dB/km
)
Serial 1 Gigabit Ethernet
(
m
)
Serial 10 Gigabit Ethernet
(
m
)
Min. Overfilled Launch (OFL)
Bandwidth
(
MHz*km
)
Minimum Effective Modal
Bandwidth (EMB)
(
MHz*km
)
62.5
OM1
K
30
850/1300
3.4/1.0
300/550
33/-
200/500
220/-
50
OM2
T
31
850/1300
3.0/1.0
750/500
150/-
700/500
950/-
50
OM3
T
80
850/1300
3.0/1.0
1000/600
300/-
1500/500
2000/-
50
OM4
T
90
850/1300
3.0/1.0
1100/600
550/-
3500/500
4700/-
*
Single-mode (OS2) fiber is ITU-T G.652.D compliant.
Notes:
1)
Improved attenuation and bandwidth options available.
2)
Bend-insensitive single-mode fibers available on request.
3)
50 µm multimode fiber macrobend loss ≤ 0.2 dB at 850 nm for two turns around 7.5 mm radius mandrel.
4)
Contact a Corning Customer Care Representative for additional information.
Single-mode
Fiber Name
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
(
nm
)
Maximum Attenuation
(
dB/km
)
Typical Attenuation*
(
dB/km
)
SMF-28e+
®
fiber
G.652.D
E
01
1310/1383/1550
0.4/0.4/0.3
0.33/0.33/0.19
SMF-28e+
®
fiber
G.652.D
E
00
1310/1383/1550
0.35/0.35/0.25
0.33/0.33/0.19
Family Spec Sheet 0036_NAFTA_AEN
Page 3 | Revision date 2014-08-08
ALTOS
®
RD Lite™ Cables, Single-Jacket,
Single-Armored, 300-432 Fibers
Ordering Information |
Note: Contact Customer Care at 1-800-743-2675 for other options.
1
Select fiber count.
Standard offerings:
300-432
Increments of 12
4
Defines outer jacket.
C = Single-jacket, single-
armored
8
Select performance
option code.
30 = 62.5 µm multimode (OM1)
31 = 50 µm multimode (OM2)
80 = 50 µm multimode (OM3)
90 = 50 µm multimode (OM4)
01 = Single-mode (OS2)
(Max. attenuation 0.4/0.4/0.3 dB/km)
2
Select fiber code.
K = 62.5 µm multimode
(OM1)
T = 50 µm multimode
(OM2/OM3/OM4)
E = Single-mode (OS2)
SMF-28e+
®
fiber
5
Defines fiber placement.
T = 12 fibers/buffer tube
(standard)
00 = Single-mode (OS2)
6
Select length markings.
3 = Markings in meters
4 = Markings in feet
(standard)
(Max. attenuation 0.35/0.35/0.25 dB/km)
9
Defines cable type.
N = ALTOS RD Cable
3
Defines cable type.
W = ALTOS
®
RD Cable
7
Defines tensile strength.
1 = 2700 N/600 lbf (standard)
10
Defines special
manufacturing code.
20 = No special requirements
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
I just started learning uCOS and created three tasks, TaskA, TaskB, TaskC, with priorities 4, 5, and 6 respectively. Now I want to test the mailbox broadcast function, TASKB sends mailboxes, and TASKA...
[i=s]This post was last edited by littleshrimp on 2016-12-19 21:06[/i] [align=left][color=rgb(0, 0, 0)][font=Calibri, sans-serif][size=10.5pt]SensorTile integrates PCM1774 93dB SNR low power stereo DA...
[p=28, null, left][color=rgb(85, 85, 85)][font=微软雅黑, 微软雅黑, "][size=14px]PCB component pad design is a key point. The quality of the final product lies in the quality of the solder joint. Therefore, wh...
When I first learned 51, I used 89s52 microcontroller. At that time, there were two ways to download: 1. Download with ISP special downloader; 2. Download with serial port
Later, I came into contact w...
After the development of video surveillance products through the analog era, digital era, and network era, it has gradually entered the high-definition era. "Let us see more clearly" is no longer a co...
On August 24th, Tesla CEO Elon
Musk
revealed information about the upcoming FSD V14, claiming it will outperform human drivers. Tesla FSD lead Ashok stated last year that FSD version 12.5, ...[Details]
How do you know if a machine is operating properly? The answer: by leveraging deep learning to detect anomalies in routine vibration data from industrial machines. Anomaly detection has many uses, ...[Details]
Recently,
Xpeng Motors and Xinlian Integrated Circuit jointly announced the mass production of China's first hybrid silicon carbide product.
Designed and developed by Xpeng Motors and joint...[Details]
1. Ease of Use: The HMI module should be designed to be simple and clear, allowing users to easily operate and configure the energy storage device.
2. Ease of Maintenance: The HMI module should...[Details]
On August 22, according to CNBC's report today, the National Highway Traffic Safety Administration (NHTSA) is launching an investigation into Tesla, and the latter is questioned whether it has fail...[Details]
The 2025 China International Automotive Testing Exhibition will be held at the Shanghai World Expo Exhibition and Convention Center from August 27 to 29, 2025.
Clacton Seafront, UK, ...[Details]
Tools/Materials
Yitong Chuanglian MODBUS to PROFIBUS Gateway YT-PB-03
Siemens s7-300
This article describes how to configure the YT-PB-03 MODBUS to PROFIBUS gat...[Details]
Speaking of the problem of vehicle spontaneous combustion, whether it is a pure electric vehicle or a fuel vehicle, there will be incidents of spontaneous combustion. For the same spontaneous combu...[Details]
On August 21, according to a report by Korean media SEDaily yesterday, according to semiconductor industry sources, the HBM4 samples provided by Samsung to Nvidia last month have passed initial tes...[Details]
I recently read an article in the Wall Street Journal titled "We need the right to repair our gadgets" (reference original article: ). The author was very angry about the phenomenon of "planned obs...[Details]
Qiangmao, your trusted semiconductor solutions partner, sincerely invites you to visit Electronics India 2025, South Asia's leading trade show for electronic components, systems, applications...[Details]
Lithium-ion batteries are a key component of electric vehicles. Their high energy density enables them to store a large amount of energy in a relatively compact and lightweight package, which is cr...[Details]
In camera and display systems, the demand for high-performance and low-power data interfaces is driving continuous technological evolution. The evolution of MIPI D-PHY and MIPI C-PHY clearly ...[Details]
The characteristics of electric vehicles place high demands on the motors they use. To increase top speed, the motor should have high instantaneous power and power density (W/kg); to increase drivi...[Details]
The main differences between xenon lamps and halogen lamps are as follows:
1. Xenon lamps rely on high-voltage arc discharge for lighting, so xenon lamps need to be equipped with an additional...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
